[Thu May  2 10:12:26 2013] Detection parameters:
  Position = (324.5, 380.2) = 3 28 57.44 31 19 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.6 +/- 16.2
  Background counts = 33.3
  Rate = 0.004 +/- 0.0004

[Thu May  2 10:12:26 2013] Off-axis axis estimate = 6.22'
[Thu May  2 10:12:50 2013] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:50 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Thu May  2 10:12:50 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.862
[Thu May  2 10:12:50 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.54"
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src25.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src25.csv
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src25.csv
[Thu May  2 10:12:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu May  2 10:12:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:03 2013] Warning, spatial fit 25 centroid is now closest to src. 17
[Thu May  2 10:13:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:03 2013] Assessing source extent using major
[Thu May  2 10:13:03 2013] Source does appear to be extended
[Thu May  2 10:13:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:20 2013] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:20 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Thu May  2 10:13:20 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.862
[Thu May  2 10:13:20 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.54"
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src25.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src25.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src25.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:33 2013] Warning, spatial fit 25 centroid is now closest to src. 17
[Thu May  2 10:13:33 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:33 2013] Assessing source extent using major
[Thu May  2 10:13:33 2013] Source does appear to be extended
[Thu May  2 10:13:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:14:01 2013] XMMSAS src. selection expression = ellipse(28181.760101, 33031.996826, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Not overwriting source region fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src18_src.reg
[Thu May  2 10:14:01 2013] Extracting stamp from image fullrun_mos1_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (287, 343) - (362, 418)
[Thu May  2 10:14:01 2013] XMMSAS bgd. selection expression = annulus(28181.760101, 33031.996826, 1087.500000, 2175.000000, X, Y) && !ellipse(29814.531433, 33399.933441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.420200, 35441.136000, 465.202413, 465.202413, 0.000000, X, Y) && !ellipse(28406.757904, 31593.701080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.572357, 31204.901245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27291.514000, 35499.085800, 1681.400048, 622.790418, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Writing fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src18.gif
[Thu May  2 10:16:46 2013] Mean detx,y = (6039.01, -1265.94) 
[Thu May  2 10:16:47 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 10:16:57 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 10:16:57 2013] Setting source spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May  2 10:16:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu May  2 10:55:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 10:55:58 2013] rmf not generated due to insufficient counts
[Thu May  2 11:01:11 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:11 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 287.00
[Thu May  2 11:01:11 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 913.00
[Thu May  2 11:01:11 2013] Got source and background scale factors 1212900.000000, 6435586.000000
[Thu May  2 11:01:11 2013] User source parameters:
  Position = (324.5, 380.2) = 3 28 57.44 31 19 49.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 114.9 +/- 18.0
  Background aperture counts = 172.1
  Rate = 0.002 +/- 0.0004

[Thu May  2 11:01:11 2013] Updating counts from extracted products
[Thu May  2 11:01:11 2013] Set source signif. to 114.93/13.12 = 8.76
[Thu May  2 11:01:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:13 2013] Using photon index=1.80, rate=0.00229, arf fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src18.arf
[Thu May  2 11:01:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:13 2013] Updating source flux to 3.2e-14
[Thu May  2 11:01:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 11:01:28 2013] xmm0065820101/analysis//spectral/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete