[Thu May  2 10:12:26 2013] Detection parameters:
  Position = (343.3, 384.5) = 3 28 51.07 31 19 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 896.9 +/- 47.5
  Background counts = 33.0
  Rate = 0.02 +/- 0.0009

[Thu May  2 10:12:26 2013] Off-axis axis estimate = 7.03'
[Thu May  2 10:12:50 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:50 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Thu May  2 10:12:50 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.676
[Thu May  2 10:12:50 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.94"
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src7.ximg exists
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu May  2 10:12:50 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src7 appears to have run properly
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May  2 10:12:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:03 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.795169 pixels away
[Thu May  2 10:13:03 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.747941 pixels away
[Thu May  2 10:13:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:03 2013] Assessing source extent using major
[Thu May  2 10:13:03 2013] Source does appear to be extended
[Thu May  2 10:13:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:20 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:20 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Thu May  2 10:13:20 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.676
[Thu May  2 10:13:20 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 9.94"
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src7.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src7.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src7.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:33 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.563730 pixels away
[Thu May  2 10:13:33 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.747941 pixels away
[Thu May  2 10:13:33 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:33 2013] Assessing source extent using major
[Thu May  2 10:13:33 2013] Source does appear to be extended
[Thu May  2 10:13:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:14:01 2013] XMMSAS src. selection expression = ellipse(29814.531433, 33399.933441, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Not overwriting source region fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_src.reg
[Thu May  2 10:14:01 2013] Extracting stamp from image fullrun_mos1_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (306, 347) - (381, 422)
[Thu May  2 10:14:01 2013] XMMSAS bgd. selection expression = annulus(29814.531433, 33399.933441, 1087.500000, 2175.000000, X, Y) && !ellipse(28406.757904, 31593.701080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.760101, 33031.996826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.572357, 31204.901245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27291.514000, 35499.085800, 1681.400048, 622.790418, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Writing fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17.gif
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Thu May  2 10:14:02 2013] Mean detx,y = (6779.57, 223.42) 
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Thu May  2 10:14:02 2013] Setting source spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May  2 10:14:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Thu May  2 10:33:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 10:33:51 2013] rmf not generated due to insufficient counts
[Thu May  2 11:01:09 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:09 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 790.00
[Thu May  2 11:01:09 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 948.00
[Thu May  2 11:01:09 2013] Got source and background scale factors 1172456.000000, 7309213.000000
[Thu May  2 11:01:09 2013] User source parameters:
  Position = (343.3, 384.5) = 3 28 51.07 31 19 54.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 637.9 +/- 29.1
  Background aperture counts = 152.1
  Rate = 0.01 +/- 0.0006

[Thu May  2 11:01:09 2013] Updating counts from extracted products
[Thu May  2 11:01:09 2013] Set source signif. to 637.93/12.33 = 51.73
[Thu May  2 11:01:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:12 2013] Using photon index=1.80, rate=0.0127, arf fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17.arf
[Thu May  2 11:01:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:12 2013] Updating source flux to 2.4e-13
[Thu May  2 11:01:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 11:01:28 2013] xmm0065820101/analysis//spectral/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete