[Thu May  2 10:12:25 2013] Detection parameters:
  Position = (325.2, 304.8) = 3 28 57.22 31 14 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4550.4 +/- 80.7
  Background counts = 32.6
  Rate = 0.09 +/- 0.002

[Thu May  2 10:12:26 2013] Off-axis axis estimate = 1.99'
[Thu May  2 10:12:50 2013] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:50 2013] Initial guess for spatial extent in simple fitting = 7.43"
[Thu May  2 10:12:50 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.821
[Thu May  2 10:12:50 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.43"
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May  2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src1.csv
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May  2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src1.csv
[Thu May  2 10:12:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  2 10:12:51 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May  2 10:13:03 2013] Spatial fit model total counts = 4162.040000, observed total counts = 4167.000000
[Thu May  2 10:13:03 2013] Offset between fit and detection position for source 1 = 0.146539 pixels
[Thu May  2 10:13:03 2013] 4172.780000 total counts/ 1148.380000 bgd. counts: snr = 89.247574
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.146539 pixels
  Position = (325.2, 304.7) = 3 28 57.21 31 14 19.5
  Extent = 5.4 (5.3-5.6)", rotation angle = 0
  Source counts = 3024.4 +/- 64.6
  Background counts = 1148.4
  Rate = 0.06 +/- 0.001
[Thu May  2 10:13:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:03 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:03 2013] Source does appear to be extended
[Thu May  2 10:13:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:20 2013] Initial guess for spatial extent in simple fitting = 5.41"
[Thu May  2 10:13:20 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.986
[Thu May  2 10:13:20 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Thu May  2 10:13:20 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src1.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src1.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  2 10:13:21 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May  2 10:13:33 2013] Spatial fit model total counts = 4171.150000, observed total counts = 4167.000000
[Thu May  2 10:13:33 2013] Offset between fit and detection position for source 1 = 0.000077 pixels
[Thu May  2 10:13:33 2013] 4182.010000 total counts/ 1146.330000 bgd. counts: snr = 89.660501
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000077 pixels
  Position = (325.2, 304.7) = 3 28 57.21 31 14 19.5
  Extent = 5.4 (5.3-5.6)", rotation angle = 0
  Source counts = 3035.7 +/- 64.7
  Background counts = 1146.3
  Rate = 0.06 +/- 0.001
[Thu May  2 10:13:33 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:33 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:33 2013] Source does appear to be extended
[Thu May  2 10:13:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:14:01 2013] Counts = 3035.680000, rescaling region sizes by 2.000000
[Thu May  2 10:14:01 2013] XMMSAS src. selection expression = ellipse(28244.414520, 26456.801400, 649.975219, 649.975219, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Not overwriting source region fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_src.reg
[Thu May  2 10:14:01 2013] Extracting stamp from image fullrun_mos1_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (288, 267) - (363, 342)
[Thu May  2 10:14:01 2013] XMMSAS bgd. selection expression = annulus(28244.414520, 26456.801400, 2166.584062, 4333.168125, X, Y) && !ellipse(27710.722000, 28366.766000, 347.791210, 347.791210, 0.000000, X, Y) && !ellipse(24234.897095, 31173.439148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31791.262060, 30362.290000, 421.762412, 329.419209, 212.836000, X, Y) && !ellipse(31058.752000, 29248.942800, 406.468012, 406.468012, 0.000000, X, Y) && !ellipse(28811.711600, 29045.922600, 319.037609, 319.037609, 0.000000, X, Y) && !ellipse(27975.003280, 22473.495600, 481.469614, 481.469614, 0.000000, X, Y) && !ellipse(26803.093200, 28500.894800, 357.827210, 357.827210, 0.000000, X, Y) && !ellipse(28406.757904, 31593.701080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28321.889893, 28925.234680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27444.269958, 25641.967041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30783.953400, 23073.068200, 317.289609, 317.289609, 0.000000, X, Y) && !ellipse(28929.097748, 29414.970764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.572357, 31204.901245, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Writing fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1.gif
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu May  2 10:14:02 2013] Mean detx,y = (-213.20, 702.51) 
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu May  2 10:14:02 2013] Setting source spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May  2 10:14:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu May  2 11:01:08 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:08 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 3917.00
[Thu May  2 11:01:08 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 5348.00
[Thu May  2 11:01:08 2013] Got source and background scale factors 1312780.000000, 38335132.000000
[Thu May  2 11:01:08 2013] User source parameters:
  Position = (325.2, 304.7) = 3 28 57.21 31 14 19.5
  Extent = 5.4 (5.3-5.6)", rotation angle = 0
  Source aperture counts = 3733.9 +/- 63.6
  Background aperture counts = 183.1
  Rate = 0.07 +/- 0.001

[Thu May  2 11:01:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:12 2013] Using photon index=1.80, rate=0.0604, arf fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1.arf
[Thu May  2 11:01:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:12 2013] Updating source flux to 6.6e-13
[Thu May  2 11:01:28 2013] xmm0065820101/analysis//spectral/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete