[Fri Jun  1 21:14:13 2012] Detection parameters:
  Position = (371.8, 231.3) = 9 51 45.70 -1 51 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.2 +/- 10.0
  Background counts = 11.2
  Rate = 0.02 +/- 0.004

[Fri Jun  1 21:14:13 2012] Off-axis axis estimate = 7.21'
[Fri Jun  1 21:15:24 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 21:15:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 21:15:24 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Fri Jun  1 21:15:24 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.142
[Fri Jun  1 21:15:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.03"
[Fri Jun  1 21:25:25 2012] fullrun_pn_xmm0065790101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 21:25:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065790101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 21:25:25 2012] fullrun_pn_xmm0065790101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 21:25:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065790101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 21:25:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065790101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065790101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:25:26 2012] fullrun_pn_xmm0065790101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 21:25:26 2012] fullrun_pn_xmm0065790101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 21:25:26 2012] Fit fullrun_pn_xmm0065790101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 21:50:35 2012] Spatial fit model total counts = 211.876000, observed total counts = 209.000000
[Fri Jun  1 21:50:35 2012] Offset between fit and detection position for source 2 = 0.153922 pixels
[Fri Jun  1 21:50:35 2012] 210.153300 total counts/ 175.412000 bgd. counts: snr = 2.623109
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.153922 pixels
  Position = (371.7, 231.3) = 9 51 45.75 -1 51 32.6
  Extent = 5.8 (3.8-8.7)", rotation angle = 0
  Source counts = 34.7 +/- 14.5
  Background counts = 175.4
  Rate = 0.007 +/- 0.003
[Fri Jun  1 21:50:35 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:50:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:50:35 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:50:35 2012] Source does appear to be extended
[Fri Jun  1 21:50:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:50:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 21:50:44 2012] Initial guess for spatial extent in simple fitting = 5.82"
[Fri Jun  1 21:50:44 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.185
[Fri Jun  1 21:50:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.82"
[Fri Jun  1 22:04:33 2012] fullrun_pn_xmm0065790101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 22:04:33 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0065790101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 22:04:33 2012] fullrun_pn_xmm0065790101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 22:04:33 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0065790101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 22:04:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065790101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065790101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 22:04:33 2012] fullrun_pn_xmm0065790101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 22:04:33 2012] fullrun_pn_xmm0065790101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 22:04:33 2012] Fit fullrun_pn_xmm0065790101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 22:29:30 2012] Spatial fit model total counts = 151.998000, observed total counts = 152.000000
[Fri Jun  1 22:29:30 2012] Offset between fit and detection position for source 2 = 0.074186 pixels
[Fri Jun  1 22:29:30 2012] 149.680000 total counts/ 111.521000 bgd. counts: snr = 3.613422
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.074186 pixels
  Position = (371.7, 231.4) = 9 51 45.75 -1 51 32.3
  Extent = 6.3 (4.0-10.3)", rotation angle = 0
  Source counts = 38.2 +/- 12.2
  Background counts = 111.5
  Rate = 0.008 +/- 0.003
[Fri Jun  1 22:29:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 22:29:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 22:29:30 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 22:29:30 2012] Source does appear to be extended
[Fri Jun  1 22:29:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 22:29:38 2012] XMMSAS src. selection expression = ellipse(32286.390000, 20081.614000, 380.070611, 380.070611, 0.000000, X, Y)
[Fri Jun  1 22:29:38 2012] Writing source region out to fullrun_pn_xmm0065790101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 22:29:38 2012] Extracting stamp from image fullrun_pn_xmm0065790101_pi300-10000_cl_sm2.00.img.gz, (350, 210) - (394, 253)
[Fri Jun  1 22:29:38 2012] XMMSAS bgd. selection expression = annulus(32286.390000, 20081.614000, 633.451018, 1266.902036, X, Y)
[Fri Jun  1 22:29:38 2012] Writing fullrun_pn_xmm0065790101_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 22:30:30 2012] Mean detx,y = (-5062.66, -6156.57) 
[Fri Jun  1 22:30:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 22:30:44 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 22:30:45 2012] Setting source spectrum file to fullrun_pn_xmm0065790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 22:30:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0065790101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  1 22:34:31 2012] Not generating rmf since there are only 38 counts
[Fri Jun  1 22:34:31 2012] rmf not generated due to insufficient counts
[Fri Jun  1 22:44:26 2012] Updating aperture counts using extracted products
[Fri Jun  1 22:44:26 2012] Error reading totcts from fullrun_pn_xmm0065790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 22:44:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 22:44:26 2012] Using photon index=1.80, rate=0.00783, arf fullrun_pn_xmm0065790101_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 22:44:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 22:44:26 2012] Updating source flux to 3.7e-14
[Fri Jun  1 22:44:36 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  1 22:44:37 2012] xmm0065790101/analysis//spectral/fullrun_pn_xmm0065790101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete