[Fri Jun  1 21:14:49 2012] Detection parameters:
  Position = (278.2, 234.7) = 9 52 12.88 -1 51 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.5 +/- 7.9
  Background counts = 4.7
  Rate = 0.004 +/- 0.001

[Fri Jun  1 21:14:49 2012] Off-axis axis estimate = 4.85'
[Fri Jun  1 21:34:44 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 21:34:44 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Fri Jun  1 21:34:44 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.972
[Fri Jun  1 21:34:44 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.85"
[Fri Jun  1 21:50:33 2012] fullrun_mos2_xmm0065790101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun  1 21:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065790101_pi300-10000_cl_pass0_src6.csv
[Fri Jun  1 21:50:33 2012] fullrun_mos2_xmm0065790101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun  1 21:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065790101_pi300-10000_cl_pass0_src6.csv
[Fri Jun  1 21:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065790101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065790101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:50:33 2012] fullrun_mos2_xmm0065790101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun  1 21:50:33 2012] fullrun_mos2_xmm0065790101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun  1 21:50:33 2012] Fit fullrun_mos2_xmm0065790101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun  1 21:50:39 2012] Spatial fit model total counts = 72.999900, observed total counts = 73.000000
[Fri Jun  1 21:50:39 2012] Offset between fit and detection position for source 8 = 0.060311 pixels
[Fri Jun  1 21:50:39 2012] 72.740100 total counts/ 48.285800 bgd. counts: snr = 3.519213
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.060311 pixels
  Position = (278.2, 234.7) = 9 52 12.88 -1 51 17.7
  Extent = 5.6 (4.0-7.6)", rotation angle = 0
  Source counts = 24.5 +/- 8.5
  Background counts = 48.3
  Rate = 0.003 +/- 0.0009
[Fri Jun  1 21:50:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:50:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:50:39 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:50:39 2012] Source does appear to be extended
[Fri Jun  1 21:50:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 22:14:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 22:14:39 2012] Initial guess for spatial extent in simple fitting = 5.56"
[Fri Jun  1 22:14:39 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.266
[Fri Jun  1 22:14:39 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 5.56"
[Fri Jun  1 22:29:28 2012] fullrun_mos2_xmm0065790101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun  1 22:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065790101_pi300-10000_cl_pass1_src6.csv
[Fri Jun  1 22:29:28 2012] fullrun_mos2_xmm0065790101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun  1 22:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065790101_pi300-10000_cl_pass1_src6.csv
[Fri Jun  1 22:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065790101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065790101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 22:29:28 2012] fullrun_mos2_xmm0065790101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun  1 22:29:28 2012] fullrun_mos2_xmm0065790101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun  1 22:29:28 2012] Fit fullrun_mos2_xmm0065790101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jun  1 22:29:33 2012] Spatial fit model total counts = 72.999900, observed total counts = 73.000000
[Fri Jun  1 22:29:33 2012] Offset between fit and detection position for source 8 = 0.000532 pixels
[Fri Jun  1 22:29:33 2012] 72.740200 total counts/ 48.308300 bgd. counts: snr = 3.515170
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.000532 pixels
  Position = (278.2, 234.7) = 9 52 12.88 -1 51 17.7
  Extent = 5.5 (4.0-7.6)", rotation angle = 0
  Source counts = 24.4 +/- 8.5
  Background counts = 48.3
  Rate = 0.003 +/- 0.0009
[Fri Jun  1 22:29:33 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 22:29:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 22:29:33 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 22:29:33 2012] Source does appear to be extended
[Fri Jun  1 22:29:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 22:38:06 2012] XMMSAS src. selection expression = ellipse(24152.788080, 20372.896400, 332.520010, 332.520010, 0.000000, X, Y)
[Fri Jun  1 22:38:06 2012] Writing source region out to fullrun_mos2_xmm0065790101_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun  1 22:38:06 2012] Extracting stamp from image fullrun_mos2_xmm0065790101_pi300-10000_cl_sm2.00.img.gz, (259, 216) - (297, 254)
[Fri Jun  1 22:38:06 2012] XMMSAS bgd. selection expression = annulus(24152.788080, 20372.896400, 554.200016, 1108.400032, X, Y)
[Fri Jun  1 22:38:06 2012] Writing fullrun_mos2_xmm0065790101_pi300-10000_pass1_cl_src8.gif
[Fri Jun  1 22:39:07 2012] Mean detx,y = (-2304.52, 3007.88) 
[Fri Jun  1 22:39:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 22:39:14 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 22:39:14 2012] Setting source spectrum file to fullrun_mos2_xmm0065790101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun  1 22:39:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0065790101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun  1 22:43:55 2012] Not generating rmf since there are only 24 counts
[Fri Jun  1 22:43:55 2012] rmf not generated due to insufficient counts
[Fri Jun  1 22:44:26 2012] Updating aperture counts using extracted products
[Fri Jun  1 22:44:26 2012] Error reading totcts from fullrun_mos2_xmm0065790101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun  1 22:44:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 22:44:26 2012] Using photon index=1.80, rate=0.00261, arf fullrun_mos2_xmm0065790101_pi300-10000_pass1_cl_src8.arf
[Fri Jun  1 22:44:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 22:44:26 2012] Updating source flux to 3.8e-14
[Fri Jun  1 22:44:28 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting