[Tue Aug 28 23:24:34 2012] Detection parameters:
  Position = (322.8, 297.5) = 0 32 45.45 39 33 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.5 +/- 6.8
  Background counts = 4.2
  Rate = 0.006 +/- 0.002

[Tue Aug 28 23:24:34 2012] Off-axis axis estimate = 1.77'
[Tue Aug 28 23:25:26 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 23:25:26 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Aug 28 23:25:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Tue Aug 28 23:25:26 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.31"
[Tue Aug 28 23:42:25 2012] fullrun_pn_xmm0065770101_pi300-10000_cl_pass0_src11.ximg exists
[Tue Aug 28 23:42:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065770101_pi300-10000_cl_pass0_src11.csv
[Tue Aug 28 23:42:25 2012] fullrun_pn_xmm0065770101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Aug 28 23:42:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065770101_pi300-10000_cl_pass0_src11.csv
[Tue Aug 28 23:42:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065770101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065770101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 23:42:25 2012] fullrun_pn_xmm0065770101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Aug 28 23:42:25 2012] fullrun_pn_xmm0065770101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Aug 28 23:42:25 2012] Fit fullrun_pn_xmm0065770101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Aug 29 00:06:09 2012] Source 11 is offset by 7.491016 and 4.885695 pixels which is larger than
2 X fitted extent = 0.840368 x 0.840368, not incorporating fit results
[Wed Aug 29 00:06:09 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:06:09 2012] Assessing source extent using major
[Wed Aug 29 00:06:09 2012] Source does appear to be extended
[Wed Aug 29 00:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 00:06:19 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 00:06:19 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Aug 29 00:06:19 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Wed Aug 29 00:06:19 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.31"
[Wed Aug 29 00:21:41 2012] fullrun_pn_xmm0065770101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Aug 29 00:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065770101_pi300-10000_cl_pass1_src11.csv
[Wed Aug 29 00:21:41 2012] fullrun_pn_xmm0065770101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Aug 29 00:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065770101_pi300-10000_cl_pass1_src11.csv
[Wed Aug 29 00:21:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065770101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065770101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:21:41 2012] fullrun_pn_xmm0065770101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Aug 29 00:21:41 2012] fullrun_pn_xmm0065770101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Aug 29 00:21:41 2012] Fit fullrun_pn_xmm0065770101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Aug 29 00:40:10 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 19.292326 pixels away
[Wed Aug 29 00:40:10 2012] Spatial fit model total counts = 59.999600, observed total counts = 60.000000
[Wed Aug 29 00:40:10 2012] Offset between fit and detection position for source 11 = 0.248808 pixels
[Wed Aug 29 00:40:10 2012] 58.757600 total counts/ 41.923200 bgd. counts: snr = 2.599983
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.248808 pixels
  Position = (322.6, 297.7) = 0 32 45.52 39 33 44.1
  Extent = 5.6 (3.0-8.8)", rotation angle = 0
  Source counts = 16.8 +/- 7.7
  Background counts = 41.9
  Rate = 0.003 +/- 0.002
[Wed Aug 29 00:40:10 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:40:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:40:10 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 00:40:10 2012] Source does appear to be extended
[Wed Aug 29 00:40:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 00:40:20 2012] XMMSAS src. selection expression = ellipse(28015.362800, 25850.924000, 335.532610, 335.532610, 0.000000, X, Y)
[Wed Aug 29 00:40:20 2012] Writing source region out to fullrun_pn_xmm0065770101_pi300-10000_pass1_cl_src11_src.reg
[Wed Aug 29 00:40:20 2012] Extracting stamp from image fullrun_pn_xmm0065770101_pi300-10000_cl_sm2.00.img.gz, (303, 278) - (342, 317)
[Wed Aug 29 00:40:20 2012] XMMSAS bgd. selection expression = annulus(28015.362800, 25850.924000, 559.221016, 1118.442032, X, Y) && !ellipse(27835.992200, 26904.943560, 488.964814, 488.964814, 0.000000, X, Y) && !ellipse(29207.952820, 24871.209381, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 00:40:20 2012] Writing fullrun_pn_xmm0065770101_pi300-10000_pass1_cl_src11.gif
[Wed Aug 29 00:43:17 2012] Mean detx,y = (865.24, 697.36) 
[Wed Aug 29 00:43:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 00:43:26 2012] grppha failed
[Wed Aug 29 00:43:26 2012] Setting source spectrum file to fullrun_pn_xmm0065770101_pi300-10000_pass1_cl_src11_src.pi.gz
[Wed Aug 29 00:43:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0065770101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Aug 29 00:44:55 2012] Not generating rmf since there are only 16 counts
[Wed Aug 29 00:44:55 2012] rmf not generated due to insufficient counts
[Wed Aug 29 00:48:11 2012] Updating aperture counts using extracted products
[Wed Aug 29 00:48:11 2012] Error reading totcts from fullrun_pn_xmm0065770101_pi300-10000_pass1_cl_src11_src.pi.gz
[Wed Aug 29 00:48:11 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 00:48:14 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Wed Aug 29 00:48:14 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 29 00:48:15 2012] xmm0065770101/analysis//spectral/fullrun_pn_xmm0065770101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete