[Tue Aug 28 23:24:58 2012] Detection parameters:
  Position = (321.9, 418.1) = 0 32 45.77 39 42 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.5 +/- 5.8
  Background counts = 1.7
  Rate = 0.005 +/- 0.001

[Tue Aug 28 23:24:58 2012] Off-axis axis estimate = 8.84'
[Tue Aug 28 23:54:54 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 23:54:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 28 23:54:54 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Tue Aug 28 23:54:54 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Tue Aug 28 23:54:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.85"
[Wed Aug 29 00:06:05 2012] fullrun_mos2_xmm0065770101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 29 00:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065770101_pi300-10000_cl_pass0_src3.csv
[Wed Aug 29 00:06:06 2012] fullrun_mos2_xmm0065770101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 29 00:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065770101_pi300-10000_cl_pass0_src3.csv
[Wed Aug 29 00:06:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065770101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065770101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:06:06 2012] fullrun_mos2_xmm0065770101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 29 00:06:06 2012] fullrun_mos2_xmm0065770101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 29 00:06:06 2012] Fit fullrun_mos2_xmm0065770101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug 29 00:06:13 2012] Spatial fit model total counts = 28.999900, observed total counts = 29.000000
[Wed Aug 29 00:06:13 2012] Offset between fit and detection position for source 5 = 0.079281 pixels
[Wed Aug 29 00:06:13 2012] 29.082400 total counts/ 13.613500 bgd. counts: snr = 4.192514
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.079281 pixels
  Position = (321.9, 418.0) = 0 32 45.74 39 42 27.5
  Extent = 4.5 (3.1-5.9)", rotation angle = 0
  Source counts = 15.5 +/- 5.4
  Background counts = 13.6
  Rate = 0.002 +/- 0.0007
[Wed Aug 29 00:06:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:06:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:06:13 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 00:06:13 2012] Source does appear to be extended
[Wed Aug 29 00:06:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 00:31:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 29 00:31:15 2012] Initial guess for spatial extent in simple fitting = 4.47"
[Wed Aug 29 00:31:15 2012] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.286
[Wed Aug 29 00:31:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.47"
[Wed Aug 29 00:40:06 2012] fullrun_mos2_xmm0065770101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 29 00:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065770101_pi300-10000_cl_pass1_src3.csv
[Wed Aug 29 00:40:06 2012] fullrun_mos2_xmm0065770101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 29 00:40:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065770101_pi300-10000_cl_pass1_src3.csv
[Wed Aug 29 00:40:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065770101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065770101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:40:06 2012] fullrun_mos2_xmm0065770101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 29 00:40:06 2012] fullrun_mos2_xmm0065770101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 29 00:40:06 2012] Fit fullrun_mos2_xmm0065770101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 29 00:40:14 2012] Spatial fit model total counts = 29.000000, observed total counts = 29.000000
[Wed Aug 29 00:40:14 2012] Offset between fit and detection position for source 5 = 0.000390 pixels
[Wed Aug 29 00:40:14 2012] 29.082600 total counts/ 13.613500 bgd. counts: snr = 4.192568
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000390 pixels
  Position = (321.9, 418.0) = 0 32 45.74 39 42 27.5
  Extent = 4.5 (3.1-6.2)", rotation angle = 0
  Source counts = 15.5 +/- 5.4
  Background counts = 13.6
  Rate = 0.002 +/- 0.0007
[Wed Aug 29 00:40:14 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:40:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:40:14 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 00:40:14 2012] Source does appear to be extended
[Wed Aug 29 00:40:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 00:47:00 2012] XMMSAS src. selection expression = ellipse(27959.952020, 36318.761600, 268.099332, 268.099332, 0.000000, X, Y)
[Wed Aug 29 00:47:00 2012] Writing source region out to fullrun_mos2_xmm0065770101_pi300-10000_pass1_cl_src5_src.reg
[Wed Aug 29 00:47:00 2012] Extracting stamp from image fullrun_mos2_xmm0065770101_pi300-10000_cl_sm2.00.img.gz, (307, 403) - (337, 433)
[Wed Aug 29 00:47:00 2012] XMMSAS bgd. selection expression = annulus(27959.952020, 36318.761600, 446.832219, 893.664439, X, Y)
[Wed Aug 29 00:47:00 2012] Writing fullrun_mos2_xmm0065770101_pi300-10000_pass1_cl_src5.gif
[Wed Aug 29 00:47:15 2012] Mean detx,y = (3634.82, 8692.59) 
[Wed Aug 29 00:47:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 00:47:20 2012] grppha failed
[Wed Aug 29 00:47:20 2012] Setting source spectrum file to fullrun_mos2_xmm0065770101_pi300-10000_pass1_cl_src5_src.pi.gz
[Wed Aug 29 00:47:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0065770101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Aug 29 00:48:04 2012] Not generating rmf since there are only 15 counts
[Wed Aug 29 00:48:04 2012] rmf not generated due to insufficient counts
[Wed Aug 29 00:48:11 2012] Updating aperture counts using extracted products
[Wed Aug 29 00:48:11 2012] Error reading totcts from fullrun_mos2_xmm0065770101_pi300-10000_pass1_cl_src5_src.pi.gz
[Wed Aug 29 00:48:11 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 00:48:13 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 29 00:48:14 2012] xmm0065770101/analysis//spectral/fullrun_mos2_xmm0065770101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete