[Fri Aug 3 10:21:27 2012] Detection parameters: Position = (248.4, 386.0) = 5 23 14.01 -36 19 27.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 266.2 +/- 22.4 Background counts = 24.7 Rate = 0.02 +/- 0.001 [Fri Aug 3 10:21:30 2012] Off-axis axis estimate = 7.31' [Fri Aug 3 10:27:04 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting [Fri Aug 3 10:27:04 2012] Initial guess for spatial extent in simple fitting = 10.08" [Fri Aug 3 10:27:04 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.944 [Fri Aug 3 10:27:04 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.08" [Fri Aug 3 14:06:01 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src15.ximg exists [Fri Aug 3 14:06:01 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src15.csv [Fri Aug 3 14:06:01 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src15_1.ximg exists [Fri Aug 3 14:06:01 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src15.csv [Fri Aug 3 14:06:01 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Aug 3 14:06:02 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Fri Aug 3 14:06:02 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Fri Aug 3 14:06:02 2012] Fit fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Fri Aug 3 16:24:34 2012] Warning, spatial fit 15 centroid is now closest to src. 14 [Fri Aug 3 16:24:34 2012] Vigneting correction estimate = 1.000000 [Fri Aug 3 16:24:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Aug 3 16:24:34 2012] Assessing source extent using major [Fri Aug 3 16:24:34 2012] Source does appear to be extended [Fri Aug 3 16:24:34 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Aug 3 16:24:34 2012] Source is confused with source 14 [Fri Aug 3 16:24:34 2012] Source is confused with source 17 [Fri Aug 3 16:25:01 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting [Fri Aug 3 16:25:01 2012] Initial guess for spatial extent in simple fitting = 10.08" [Fri Aug 3 16:25:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.944 [Fri Aug 3 16:25:01 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.08" [Fri Aug 3 18:46:44 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src15.ximg exists [Fri Aug 3 18:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src15.csv [Fri Aug 3 18:46:44 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src15_1.ximg exists [Fri Aug 3 18:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src15.csv [Fri Aug 3 18:46:44 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Aug 3 18:46:45 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Fri Aug 3 18:46:45 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Fri Aug 3 18:46:45 2012] Fit fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly [Fri Aug 3 20:29:17 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 30.296164 pixels away [Fri Aug 3 20:29:17 2012] Spatial fit model total counts = 1894.660000, observed total counts = 1887.000000 [Fri Aug 3 20:29:17 2012] Offset between fit and detection position for source 15 = 4.469797 pixels [Fri Aug 3 20:29:17 2012] Warning, changing simple spatial fit ID from 15 to 13 [Fri Aug 3 20:29:17 2012] 1453.653000 total counts/ 673.280000 bgd. counts: snr = 30.074913 Spatial fit parameters: Offset between fit and detection position for source 15 = 4.469797 pixels Position = (246.5, 390.0) = 5 23 14.71 -36 19 10.0 Extent = 18.7 (18.2-19.0)", rotation angle = 0 Source counts = 780.4 +/- 38.1 Background counts = 673.3 Rate = 0.03 +/- 0.001 [Fri Aug 3 20:29:17 2012] Spatial fit model total counts = 2016.510000, observed total counts = 1978.000000 [Fri Aug 3 20:29:17 2012] Offset between fit and detection position for source 15 = 1.426512 pixels [Fri Aug 3 20:29:17 2012] Warning, changing simple spatial fit ID from 13 to 14 [Fri Aug 3 20:29:17 2012] 1949.609000 total counts/ 929.889000 bgd. counts: snr = 33.439932 Spatial fit parameters: Offset between fit and detection position for source 15 = 1.426512 pixels Position = (246.0, 391.3) = 5 23 14.88 -36 19 4.2 Extent = 38.2" x 6.1", rotation angle = 67 Source counts = 1019.7 +/- 44.2 Background counts = 929.9 Rate = 0.03 +/- 0.001 [Fri Aug 3 20:29:17 2012] Vigneting correction estimate = 1.000000 [Fri Aug 3 20:29:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Aug 3 20:29:17 2012] Assessing source extent using major [Fri Aug 3 20:29:17 2012] Source does appear to be extended [Fri Aug 3 20:29:17 2012] Computing asymmetry using major and minor axis, asym = 6.25 [Fri Aug 3 20:29:17 2012] Source is asymmetric [Fri Aug 3 20:29:38 2012] Counts = 1019.720000, rescaling region sizes by 2.000000 [Fri Aug 3 20:29:38 2012] XMMSAS src. selection expression = ellipse(21353.177157, 33997.756381, 4584.504132, 733.311171, 67.253631, X, Y) [Fri Aug 3 20:29:38 2012] Writing source region out to fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src15_src.reg [Fri Aug 3 20:29:38 2012] Extracting stamp from image fullrun_pn_xmm0065760201_pi300-10000_cl_sm2.00.img.gz, (0, 128) - (509, 595) [Fri Aug 3 20:29:38 2012] XMMSAS bgd. selection expression = annulus(21353.177157, 33997.756381, 15281.680440, 30563.360879, X, Y) && !ellipse(14026.548000, 20424.689800, 488.240814, 488.240814, 0.000000, X, Y) && !ellipse(25436.638980, 23836.352200, 1446.979242, 1446.979242, 0.000000, X, Y) && !ellipse(25215.417999, 24911.547241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29778.738983, 22943.533325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25663.602875, 16657.253647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12499.557419, 25500.472565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20091.667778, 37105.868400, 771.532022, 771.532022, 0.000000, X, Y) && !ellipse(20208.038000, 36788.240000, 1162.680033, 1162.680033, 0.000000, X, Y) && !ellipse(20457.544600, 36203.663800, 1799.936052, 382.580811, 67.926000, X, Y) && !ellipse(20822.608000, 35154.680000, 1686.904049, 1686.904049, 0.000000, X, Y) && !ellipse(16224.323242, 35071.383240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21059.110000, 34571.738000, 1528.168044, 1528.168044, 0.000000, X, Y) && !ellipse(21288.890000, 34083.256000, 1613.224046, 1613.224046, 0.000000, X, Y) && !ellipse(17247.430340, 33620.815400, 444.589613, 444.589613, 0.000000, X, Y) && !ellipse(21713.633400, 33128.466000, 1479.368043, 1479.368043, 0.000000, X, Y) && !ellipse(19060.393677, 32950.819305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22058.391400, 32330.294000, 1252.136036, 1252.136036, 0.000000, X, Y) && !ellipse(22247.733710, 31763.990446, 1484.712043, 417.866408, 69.271280, X, Y) && !ellipse(31764.053200, 31169.707000, 387.760811, 387.760811, 0.000000, X, Y) && !ellipse(22356.742000, 31441.860000, 1427.552041, 1427.552041, 0.000000, X, Y) && !ellipse(34555.841200, 30215.361800, 364.936811, 364.936811, 0.000000, X, Y) && !ellipse(23536.339000, 28556.615400, 2374.176068, 461.080013, 66.773000, X, Y) && !ellipse(41119.210754, 28837.995728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35996.191010, 27519.824127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24019.438000, 27265.912000, 1305.112038, 1305.112038, 0.000000, X, Y) && !ellipse(33742.729584, 26611.158936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35685.993317, 26607.102051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12215.900726, 22817.297302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25016.883700, 21722.120200, 442.936013, 442.936013, 0.000000, X, Y) && !ellipse(28678.808136, 19970.191238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25245.868530, 38378.240814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22883.766000, 30089.826000, 1320.096038, 1320.096038, 0.000000, X, Y) && !ellipse(23451.446000, 28638.662000, 1235.656036, 1235.656036, 0.000000, X, Y) && !ellipse(23808.187800, 27869.830400, 2374.176068, 427.579212, 67.666000, X, Y) && !ellipse(26288.434814, 9900.337502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13218.461029, 18356.342300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35205.531250, 40041.276825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.621002, 38463.217682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30572.043152, 32534.664703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19882.235428, 8592.638664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28661.011475, 29120.018250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23794.151200, 8733.262400, 727.065621, 727.065621, 0.000000, X, Y) && !ellipse(19211.475464, 28418.190460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35384.376678, 27361.889709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16547.939453, 26785.180176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36353.778320, 26953.155914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24258.926200, 26746.514600, 1137.104033, 335.208010, 66.918000, X, Y) && !ellipse(24741.336000, 25530.070000, 1110.168032, 1110.168032, 0.000000, X, Y) && !ellipse(14683.561951, 25334.782806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17195.033813, 23000.292542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25171.787903, 22334.636871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30213.699158, 21590.221085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32504.994751, 16124.617599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15537.684875, 15915.819458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29959.183600, 13900.282600, 573.480017, 573.480017, 0.000000, X, Y) && !ellipse(17291.152512, 10897.171570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27507.130432, 7736.126213, 870.000000, 870.000000, 0.000000, X, Y) [Fri Aug 3 20:29:38 2012] Writing fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src15.gif [Fri Aug 3 20:49:11 2012] Mean detx,y = (220.98, 10632.15) [Fri Aug 3 20:49:18 2012] Setting backscal keywords in source and bgd. spectrum [Fri Aug 3 20:58:43 2012] Binned source spectrum to 10 counts/bin [Fri Aug 3 20:58:43 2012] Setting source spectrum file to fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Fri Aug 3 20:58:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src15_bgd.pi.gz [Sat Aug 4 00:16:57 2012] Updating aperture counts using extracted products [Sat Aug 4 00:16:57 2012] Error reading totcts from fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Sat Aug 4 00:16:58 2012] Calculating source flux in energy range 0.30-8.00 [Sat Aug 4 00:16:58 2012] Using photon index=1.80, rate=0.034, arf fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src15.arf [Sat Aug 4 00:16:58 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Aug 4 00:16:58 2012] Updating source flux to 1.3e-13 [Sat Aug 4 00:17:45 2012] Flag c found in src. 15 procflags, skipping spectral fitting