[Fri Aug  3 10:21:27 2012] Detection parameters:
  Position = (238.4, 410.1) = 5 23 17.59 -36 17 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.0 +/- 22.0
  Background counts = 23.5
  Rate = 0.009 +/- 0.0007

[Fri Aug  3 10:21:30 2012] Off-axis axis estimate = 9.19'
[Fri Aug  3 10:27:04 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 10:27:04 2012] Initial guess for spatial extent in simple fitting = 11.02"
[Fri Aug  3 10:27:04 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Fri Aug  3 10:27:04 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.02"
[Fri Aug  3 14:06:01 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src11.ximg exists
[Fri Aug  3 14:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src11.csv
[Fri Aug  3 14:06:01 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Aug  3 14:06:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src11.csv
[Fri Aug  3 14:06:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 14:06:02 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Aug  3 14:06:02 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Aug  3 14:06:02 2012] Fit fullrun_pn_xmm0065760201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Aug  3 16:24:34 2012] Spatial fit model total counts = 921.861000, observed total counts = 922.000000
[Fri Aug  3 16:24:34 2012] Offset between fit and detection position for source 11 = 5.042920 pixels
[Fri Aug  3 16:24:34 2012] 946.470700 total counts/ 21.110700 bgd. counts: snr = 201.399972
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 5.042920 pixels
  Position = (240.5, 405.5) = 5 23 16.87 -36 18 2.7
  Extent = 21.2 (21.2-21.2)", rotation angle = 0
  Source counts = 925.4 +/- 30.8
  Background counts = 21.1
  Rate = 0.03 +/- 0.001
[Fri Aug  3 16:24:34 2012] Spatial fit model total counts = 921.003000, observed total counts = 929.000000
[Fri Aug  3 16:24:34 2012] Offset between fit and detection position for source 11 = 1.005316 pixels
[Fri Aug  3 16:24:34 2012] Warning, changing simple spatial fit ID from 11 to 13
[Fri Aug  3 16:24:34 2012] 881.072000 total counts/ 101.615000 bgd. counts: snr = 77.323811
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.005316 pixels
  Position = (239.9, 404.6) = 5 23 17.07 -36 18 6.3
  Extent = 21.1 (21.0-21.1)", rotation angle = 0
  Source counts = 779.5 +/- 29.7
  Background counts = 101.6
  Rate = 0.03 +/- 0.001
[Fri Aug  3 16:24:34 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 16:24:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 16:24:34 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 16:24:34 2012] Source does appear to be extended
[Fri Aug  3 16:24:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 16:24:34 2012] Source is confused with source 10
[Fri Aug  3 16:24:34 2012] Source is confused with source 13
[Fri Aug  3 16:24:34 2012] Source is confused with source 14
[Fri Aug  3 16:25:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 16:25:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 16:25:00 2012] Initial guess for spatial extent in simple fitting = 21.09"
[Fri Aug  3 16:25:00 2012] source mask rpix=4.8, npix_max = 114, mask sum = 110, frac = 0.962
[Fri Aug  3 16:25:00 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 21.09"
[Fri Aug  3 18:46:43 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src11.ximg exists
[Fri Aug  3 18:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src11.csv
[Fri Aug  3 18:46:43 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Aug  3 18:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src11.csv
[Fri Aug  3 18:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 18:46:45 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Aug  3 18:46:45 2012] fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Aug  3 18:46:45 2012] Fit fullrun_pn_xmm0065760201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Aug  3 20:29:17 2012] Warning, spatial fit 11 centroid is now closest to src. 15
[Fri Aug  3 20:29:17 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:29:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:29:17 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:29:17 2012] Source does appear to be extended
[Fri Aug  3 20:29:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 20:29:38 2012] XMMSAS src. selection expression = ellipse(20822.608000, 35154.680000, 1265.178036, 1265.178036, 0.000000, X, Y)
[Fri Aug  3 20:29:38 2012] Writing source region out to fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src11_src.reg
[Fri Aug  3 20:29:38 2012] Extracting stamp from image fullrun_pn_xmm0065760201_pi300-10000_cl_sm2.00.img.gz, (167, 332) - (313, 477)
[Fri Aug  3 20:29:38 2012] XMMSAS bgd. selection expression = annulus(20822.608000, 35154.680000, 2108.630061, 4217.260121, X, Y) && !ellipse(20091.667778, 37105.868400, 771.532022, 771.532022, 0.000000, X, Y) && !ellipse(20208.038000, 36788.240000, 1162.680033, 1162.680033, 0.000000, X, Y) && !ellipse(20457.544600, 36203.663800, 1799.936052, 382.580811, 67.926000, X, Y) && !ellipse(16224.323242, 35071.383240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21059.110000, 34571.738000, 1528.168044, 1528.168044, 0.000000, X, Y) && !ellipse(21288.890000, 34083.256000, 1613.224046, 1613.224046, 0.000000, X, Y) && !ellipse(21353.177157, 33997.756381, 3056.336088, 488.874114, 67.253631, X, Y) && !ellipse(17247.430340, 33620.815400, 444.589613, 444.589613, 0.000000, X, Y) && !ellipse(21713.633400, 33128.466000, 1479.368043, 1479.368043, 0.000000, X, Y) && !ellipse(19060.393677, 32950.819305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22058.391400, 32330.294000, 1252.136036, 1252.136036, 0.000000, X, Y) && !ellipse(22247.733710, 31763.990446, 1484.712043, 417.866408, 69.271280, X, Y) && !ellipse(22356.742000, 31441.860000, 1427.552041, 1427.552041, 0.000000, X, Y) && !ellipse(25245.868530, 38378.240814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22883.766000, 30089.826000, 1320.096038, 1320.096038, 0.000000, X, Y) && !ellipse(23263.621002, 38463.217682, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug  3 20:29:38 2012] Writing fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src11.gif
[Fri Aug  3 20:44:09 2012] Mean detx,y = (151.59, 11941.88) 
[Fri Aug  3 20:44:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 20:45:23 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 20:45:24 2012] Setting source spectrum file to fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Aug  3 20:45:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Aug  4 00:16:57 2012] Updating aperture counts using extracted products
[Sat Aug  4 00:16:57 2012] Error reading totcts from fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Aug  4 00:16:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 00:16:58 2012] Using photon index=1.80, rate=0.026, arf fullrun_pn_xmm0065760201_pi300-10000_pass1_cl_src11.arf
[Sat Aug  4 00:16:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 00:16:58 2012] Updating source flux to 1.1e-13
[Sat Aug  4 00:17:45 2012] Flag c found in src. 11 procflags, skipping spectral fitting