[Fri Aug  3 10:23:03 2012] Detection parameters:
  Position = (409.4, 310.0) = 5 22 16.02 -36 24 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.5 +/- 11.3
  Background counts = 8.2
  Rate = 0.002 +/- 0.0004

[Fri Aug  3 10:23:04 2012] Off-axis axis estimate = 8.09'
[Fri Aug  3 14:57:23 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 14:57:23 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Fri Aug  3 14:57:23 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.065
[Fri Aug  3 14:57:23 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.47"
[Fri Aug  3 16:24:16 2012] fullrun_mos2_xmm0065760201_pi300-10000_cl_pass0_src29.ximg exists
[Fri Aug  3 16:24:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065760201_pi300-10000_cl_pass0_src29.csv
[Fri Aug  3 16:24:16 2012] fullrun_mos2_xmm0065760201_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Aug  3 16:24:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065760201_pi300-10000_cl_pass0_src29.csv
[Fri Aug  3 16:24:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065760201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065760201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 16:24:16 2012] fullrun_mos2_xmm0065760201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Aug  3 16:24:16 2012] fullrun_mos2_xmm0065760201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Aug  3 16:24:16 2012] Fit fullrun_mos2_xmm0065760201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Aug  3 16:24:48 2012] Warning, spatial fit 29 centroid is now closest to src. 10
[Fri Aug  3 16:24:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 16:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 16:24:48 2012] Assessing source extent using major
[Fri Aug  3 16:24:48 2012] Source does appear to be extended
[Fri Aug  3 16:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 16:24:48 2012] Source is confused with source 34
[Fri Aug  3 19:19:54 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 19:19:54 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Fri Aug  3 19:19:54 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.065
[Fri Aug  3 19:19:54 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 10.47"
[Fri Aug  3 20:29:04 2012] fullrun_mos2_xmm0065760201_pi300-10000_cl_pass1_src27.ximg exists
[Fri Aug  3 20:29:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065760201_pi300-10000_cl_pass1_src27.csv
[Fri Aug  3 20:29:04 2012] fullrun_mos2_xmm0065760201_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Aug  3 20:29:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065760201_pi300-10000_cl_pass1_src27.csv
[Fri Aug  3 20:29:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065760201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065760201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:29:04 2012] fullrun_mos2_xmm0065760201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Aug  3 20:29:04 2012] fullrun_mos2_xmm0065760201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Aug  3 20:29:04 2012] Fit fullrun_mos2_xmm0065760201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Aug  3 20:29:25 2012] Source 20 is offset by -4.500159 and -5.572807 pixels which is larger than
2 X fitted extent = 1.740212 x 1.740212, not incorporating fit results
[Fri Aug  3 20:29:25 2012] Spatial fit model total counts = 331.343000, observed total counts = 330.000000
[Fri Aug  3 20:29:25 2012] Offset between fit and detection position for source 20 = 1.904182 pixels
[Fri Aug  3 20:29:25 2012] Warning, changing simple spatial fit ID from 27 to 31
[Fri Aug  3 20:29:25 2012] 303.597000 total counts/ 164.367000 bgd. counts: snr = 10.859892
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.904182 pixels
  Position = (411.0, 308.9) = 5 22 15.46 -36 25 2.3
  Extent = 20.6 (19.6-21.0)", rotation angle = 0
  Source counts = 139.2 +/- 17.4
  Background counts = 164.4
  Rate = 0.004 +/- 0.0006
[Fri Aug  3 20:29:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:29:25 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:29:25 2012] Source does appear to be extended
[Fri Aug  3 20:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 23:56:08 2012] XMMSAS src. selection expression = ellipse(35704.379200, 26828.570000, 1233.804036, 1233.804036, 0.000000, X, Y)
[Fri Aug  3 23:56:08 2012] Writing source region out to fullrun_mos2_xmm0065760201_pi300-10000_pass1_cl_src20_src.reg
[Fri Aug  3 23:56:08 2012] Extracting stamp from image fullrun_mos2_xmm0065760201_pi300-10000_cl_sm2.00.img.gz, (340, 238) - (482, 380)
[Fri Aug  3 23:56:08 2012] XMMSAS bgd. selection expression = annulus(35704.379200, 26828.570000, 2056.340059, 4112.680118, X, Y) && !ellipse(31771.277800, 31159.797200, 486.900814, 486.900814, 0.000000, X, Y) && !ellipse(33723.704880, 26441.586000, 353.265610, 353.265610, 0.000000, X, Y) && !ellipse(34518.778200, 30164.431200, 524.266415, 524.266415, 0.000000, X, Y) && !ellipse(35659.928894, 26505.669312, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug  3 23:56:08 2012] Writing fullrun_mos2_xmm0065760201_pi300-10000_pass1_cl_src20.gif
[Sat Aug  4 00:04:39 2012] Mean detx,y = (10651.27, 1095.14) 
[Sat Aug  4 00:04:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 00:05:06 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 00:05:06 2012] Setting source spectrum file to fullrun_mos2_xmm0065760201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Aug  4 00:05:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0065760201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Aug  4 00:16:59 2012] Updating aperture counts using extracted products
[Sat Aug  4 00:16:59 2012] Error reading totcts from fullrun_mos2_xmm0065760201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Aug  4 00:17:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 00:17:00 2012] Using photon index=1.80, rate=0.0044, arf fullrun_mos2_xmm0065760201_pi300-10000_pass1_cl_src20.arf
[Sat Aug  4 00:17:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 00:17:00 2012] Updating source flux to 8.6e-14
[Sat Aug  4 00:17:28 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Sat Aug  4 00:17:28 2012] Flag c found in src. 20 procflags, skipping spectral fitting