[Tue Jul 10 03:01:28 2012] Detection parameters:
  Position = (290.9, 367.0) = 0 41 50.39 -9 18 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9414.9 +/- 121.7
  Background counts = 431.0
  Rate = 1 +/- 0.02

[Tue Jul 10 03:01:29 2012] Off-axis axis estimate = 5.00'
[Tue Jul 10 03:03:40 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 03:03:40 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Tue Jul 10 03:03:40 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.151
[Tue Jul 10 03:03:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.93"
[Tue Jul 10 04:57:48 2012] fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 10 04:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 04:57:48 2012] fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 10 04:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 04:57:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 04:57:49 2012] fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 10 04:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 10 04:57:49 2012] fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 10 04:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 10 04:57:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 07:33:03 2012] Source 1 is offset by 3.229385 and 7.603030 pixels which is larger than
2 X fitted extent = 1.130818 x 1.130818, not incorporating fit results
[Tue Jul 10 07:33:03 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 07:33:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 07:33:03 2012] Assessing source extent using major
[Tue Jul 10 07:33:03 2012] Source does appear to be extended
[Tue Jul 10 07:33:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 07:33:26 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 07:33:26 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Tue Jul 10 07:33:26 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.151
[Tue Jul 10 07:33:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.93"
[Tue Jul 10 09:03:55 2012] fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 10 09:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 09:03:55 2012] fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 10 09:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 09:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 09:03:56 2012] fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 10 09:03:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul 10 09:03:56 2012] fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 10 09:03:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul 10 09:03:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 11:05:37 2012] Spatial fit model total counts = 34628.700000, observed total counts = 31169.000000
[Tue Jul 10 11:05:37 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 11:05:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 11:05:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 11:05:38 2012] Assessing source extent using major
[Tue Jul 10 11:05:38 2012] Source does appear to be extended
[Tue Jul 10 11:05:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 11:05:54 2012] Counts = 9414.901367, rescaling region sizes by 2.000000
[Tue Jul 10 11:05:54 2012] XMMSAS src. selection expression = ellipse(25262.600525, 31880.125641, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jul 10 11:05:54 2012] Writing source region out to fullrun_pn_xmm0065140101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 10 11:05:54 2012] Extracting stamp from image fullrun_pn_xmm0065140101_pi300-10000_cl_sm2.00.img.gz, (216, 292) - (366, 442)
[Tue Jul 10 11:05:54 2012] XMMSAS bgd. selection expression = annulus(25262.600525, 31880.125641, 4350.000000, 8700.000000, X, Y) && !ellipse(24298.240000, 30819.116000, 1267.488036, 1267.488036, 0.000000, X, Y) && !ellipse(23699.319275, 30063.034210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27227.516022, 33331.871765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27588.114136, 32394.834930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27023.615082, 31774.813904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26801.383820, 31183.313202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17832.516968, 31014.280762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.782776, 30411.992676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26828.396088, 30483.333313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26356.000000, 29950.532654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26099.672852, 29530.167175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24530.096527, 29635.170929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26037.141602, 28982.317810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22721.957855, 23935.991241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31236.689911, 34757.683563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27606.054169, 32833.066101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25487.569122, 34477.256714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32408.181763, 27079.453003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33814.884600, 27035.425800, 489.606414, 489.606414, 0.000000, X, Y) && !ellipse(29662.262848, 26841.610168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29179.878540, 26662.756775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23185.977325, 24105.472382, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 11:05:54 2012] Writing fullrun_pn_xmm0065140101_pi300-10000_pass1_cl_src1.gif
[Tue Jul 10 11:06:09 2012] Mean detx,y = (-3715.27, -3969.25) 
[Tue Jul 10 11:06:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 11:08:40 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 11:08:41 2012] Setting source spectrum file to fullrun_pn_xmm0065140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 11:08:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0065140101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 10 11:29:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 10 11:29:52 2012] rmf not generated due to insufficient counts
[Tue Jul 10 16:34:42 2012] Updating aperture counts using extracted products
[Tue Jul 10 16:34:42 2012] Error reading totcts from fullrun_pn_xmm0065140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 16:34:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 16:34:43 2012] Using photon index=1.80, rate=1.41, arf fullrun_pn_xmm0065140101_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 16:34:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 16:34:43 2012] Updating source flux to 4.6e-12
[Tue Jul 10 16:38:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jul 10 16:39:56 2012] xmm0065140101/analysis//spectral/fullrun_pn_xmm0065140101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete