[Tue Jul 10 03:02:07 2012] Detection parameters:
  Position = (285.8, 231.2) = 0 41 51.91 -9 28 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.0 +/- 9.0
  Background counts = 17.3
  Rate = 0.004 +/- 0.001

[Tue Jul 10 03:02:07 2012] Off-axis axis estimate = 4.96'
[Tue Jul 10 06:14:32 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 06:14:32 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Tue Jul 10 06:14:32 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Tue Jul 10 06:14:32 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.91"
[Tue Jul 10 07:32:50 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src35.ximg exists
[Tue Jul 10 07:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src35.csv
[Tue Jul 10 07:32:50 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Jul 10 07:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src35.csv
[Tue Jul 10 07:32:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 07:32:51 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Jul 10 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Jul 10 07:32:51 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Jul 10 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Jul 10 07:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 07:33:17 2012] Spatial fit model total counts = 300.523000, observed total counts = 359.000000
[Tue Jul 10 07:33:17 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 07:33:17 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 07:33:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 07:33:17 2012] Assessing source extent using major
[Tue Jul 10 07:33:17 2012] Source does appear to be extended
[Tue Jul 10 07:33:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 07:33:17 2012] Deleting source due to low Poisson probability 0.8