[Tue Jul 10 03:02:07 2012] Detection parameters:
  Position = (287.0, 235.4) = 0 41 51.55 -9 27 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.5 +/- 9.3
  Background counts = 18.0
  Rate = 0.005 +/- 0.001

[Tue Jul 10 03:02:07 2012] Off-axis axis estimate = 4.65'
[Tue Jul 10 06:14:32 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 06:14:32 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Tue Jul 10 06:14:32 2012] source mask rpix=2.0, npix_max = 25, mask sum = 29, frac = 1.149
[Tue Jul 10 06:14:32 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.75"
[Tue Jul 10 07:32:50 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src29.ximg exists
[Tue Jul 10 07:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src29.csv
[Tue Jul 10 07:32:50 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Jul 10 07:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src29.csv
[Tue Jul 10 07:32:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 07:32:51 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Jul 10 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Jul 10 07:32:51 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Jul 10 07:32:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Jul 10 07:32:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 07:33:17 2012] Spatial fit model total counts = 563.124000, observed total counts = 509.000000
[Tue Jul 10 07:33:17 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 07:33:17 2012] Warning, spatial fit 29 centroid is now closest to src. 33
[Tue Jul 10 07:33:17 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 07:33:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 07:33:17 2012] Assessing source extent using major
[Tue Jul 10 07:33:17 2012] Source does appear to be extended
[Tue Jul 10 07:33:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 07:33:17 2012] Deleting source due to low Poisson probability 0.9