[Tue Jul 10 03:02:07 2012] Detection parameters:
  Position = (291.3, 367.0) = 0 41 50.28 -9 18 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4019.6 +/- 80.9
  Background counts = 168.7
  Rate = 0.4 +/- 0.008

[Tue Jul 10 03:02:07 2012] Off-axis axis estimate = 5.00'
[Tue Jul 10 06:14:32 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 06:14:32 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Tue Jul 10 06:14:32 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.151
[Tue Jul 10 06:14:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.93"
[Tue Jul 10 07:32:50 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 10 07:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 07:32:50 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 10 07:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 07:32:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 07:32:51 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 10 07:32:51 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 10 07:32:51 2012] Fit fullrun_mos2_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 10 07:33:17 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Tue Jul 10 07:33:17 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 07:33:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 07:33:17 2012] Assessing source extent using major
[Tue Jul 10 07:33:17 2012] Source does appear to be extended
[Tue Jul 10 07:33:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 07:33:17 2012] Source is confused with source 2
[Tue Jul 10 09:45:10 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 09:45:10 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Tue Jul 10 09:45:10 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.151
[Tue Jul 10 09:45:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.93"
[Tue Jul 10 11:05:27 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 10 11:05:27 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 10 11:05:27 2012] Fit fullrun_mos2_xmm0065140101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jul 10 11:05:28 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 10 11:05:28 2012] fullrun_mos2_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 10 11:05:28 2012] Fit fullrun_mos2_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 10 11:05:46 2012] Spatial fit model total counts = 14206.300000, observed total counts = 14202.000000
[Tue Jul 10 11:05:46 2012] Offset between fit and detection position for source 1 = 0.605403 pixels
[Tue Jul 10 11:05:46 2012] 14204.050000 total counts/ 8381.590000 bgd. counts: snr = 63.597978
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.605403 pixels
  Position = (290.8, 366.7) = 0 41 50.43 -9 18 14.3
  Extent = 14.6 (13.9-15.8)", rotation angle = 0
  Source counts = 5822.5 +/- 119.2
  Background counts = 8381.6
  Rate = 0.5 +/- 0.01
[Tue Jul 10 11:05:46 2012] Spatial fit model total counts = 17193.700000, observed total counts = 17173.000000
[Tue Jul 10 11:05:46 2012] Offset between fit and detection position for source 1 = 0.034240 pixels
[Tue Jul 10 11:05:46 2012] Warning, changing simple spatial fit ID from 1 to 2
[Tue Jul 10 11:05:46 2012] 17383.300000 total counts/ 11714.800000 bgd. counts: snr = 52.372187
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.034240 pixels
  Position = (290.8, 366.6) = 0 41 50.42 -9 18 14.4
  Extent = 16.7 (15.9-17.7)", rotation angle = 0
  Source counts = 5668.5 +/- 131.8
  Background counts = 11714.8
  Rate = 0.5 +/- 0.01
[Tue Jul 10 11:05:46 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 11:05:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 11:05:46 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 11:05:46 2012] Source does appear to be extended
[Tue Jul 10 11:05:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 13:05:55 2012] Counts = 5668.500000, rescaling region sizes by 2.000000
[Tue Jul 10 13:05:55 2012] XMMSAS src. selection expression = ellipse(25254.058000, 31848.822400, 2001.084058, 2001.084058, 0.000000, X, Y)
[Tue Jul 10 13:05:55 2012] Writing source region out to fullrun_mos2_xmm0065140101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 10 13:05:55 2012] Extracting stamp from image fullrun_mos2_xmm0065140101_pi300-10000_cl_sm2.00.img.gz, (176, 252) - (406, 482)
[Tue Jul 10 13:05:55 2012] XMMSAS bgd. selection expression = annulus(25254.058000, 31848.822400, 6670.280192, 13340.560384, X, Y) && !ellipse(24492.890000, 31641.974000, 1393.976040, 1393.976040, 0.000000, X, Y) && !ellipse(23544.568237, 32408.723389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26063.792786, 33688.904175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24057.414400, 30540.160000, 1321.320038, 1321.320038, 0.000000, X, Y) && !ellipse(25258.273600, 30658.518000, 1313.136038, 1313.136038, 0.000000, X, Y) && !ellipse(27501.620000, 21970.726400, 637.832818, 637.832818, 0.000000, X, Y) && !ellipse(25225.278778, 34044.619690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31207.160675, 34765.290222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23312.046000, 29367.078000, 2531.752073, 2531.752073, 0.000000, X, Y) && !ellipse(24833.051300, 29540.503204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26005.621094, 21190.347122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24472.844000, 33378.160000, 1523.800044, 1523.800044, 0.000000, X, Y) && !ellipse(25667.740000, 29392.864000, 2626.272076, 2626.272076, 0.000000, X, Y) && !ellipse(27011.000000, 21756.950000, 1336.512038, 1336.512038, 0.000000, X, Y) && !ellipse(25872.810000, 21506.014000, 1126.272032, 1126.272032, 0.000000, X, Y) && !ellipse(24856.412200, 21611.636000, 1230.944035, 1230.944035, 0.000000, X, Y)
[Tue Jul 10 13:05:55 2012] Writing fullrun_mos2_xmm0065140101_pi300-10000_pass1_cl_src1.gif
[Tue Jul 10 13:06:01 2012] Mean detx,y = (3767.80, 3744.89) 
[Tue Jul 10 13:06:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 13:10:33 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 13:10:33 2012] Setting source spectrum file to fullrun_mos2_xmm0065140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 13:10:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0065140101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 10 16:34:44 2012] Updating aperture counts using extracted products
[Tue Jul 10 16:34:44 2012] Error reading totcts from fullrun_mos2_xmm0065140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 16:34:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 16:34:44 2012] Using photon index=1.80, rate=0.453, arf fullrun_mos2_xmm0065140101_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 16:34:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 16:34:44 2012] Updating source flux to 5.2e-12
[Tue Jul 10 16:36:43 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jul 10 16:38:52 2012] Reading fit data from xmm0065140101/analysis//spectral/fullrun_mos2_xmm0065140101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul 10 16:38:52 2012] Spectral fit parameter nH value = 1.05605e+21
[Tue Jul 10 16:38:52 2012] Spectral fit parameter PhoIndex value = 2.02323
[Tue Jul 10 16:38:52 2012] Failed to get F(0.3-8.0) from xmm0065140101/analysis//spectral/fullrun_mos2_xmm0065140101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul 10 16:38:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 16:38:52 2012] Using Nh = 1.1e+21, photon index=2.02, rate=0.453, arf fullrun_mos2_xmm0065140101_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 16:38:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 16:38:52 2012] Updating source flux to 5.1e-12