[Tue Jul 10 03:01:49 2012] Detection parameters:
  Position = (265.0, 358.0) = 0 41 58.01 -9 18 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.1 +/- 21.4
  Background counts = 132.5
  Rate = 0.01 +/- 0.002

[Tue Jul 10 03:01:50 2012] Off-axis axis estimate = 4.95'
[Tue Jul 10 04:57:51 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 04:57:51 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Tue Jul 10 04:57:51 2012] source mask rpix=2.0, npix_max = 25, mask sum = 36, frac = 1.387
[Tue Jul 10 04:57:51 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.90"
[Tue Jul 10 06:14:30 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jul 10 06:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src11.csv
[Tue Jul 10 06:14:30 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jul 10 06:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src11.csv
[Tue Jul 10 06:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 06:14:31 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jul 10 06:14:31 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jul 10 06:14:31 2012] Fit fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jul 10 07:33:10 2012] Spatial fit model total counts = 2158.520000, observed total counts = 2164.000000
[Tue Jul 10 07:33:10 2012] Offset between fit and detection position for source 9 = 7.260116 pixels
[Tue Jul 10 07:33:10 2012] 2237.270000 total counts/ 2040.270000 bgd. counts: snr = 4.361365
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 7.260116 pixels
  Position = (257.8, 357.0) = 0 42 0.13 -9 18 56.3
  Extent = 17.8 (17.8-35.6)", rotation angle = 0
  Source counts = 197.0 +/- 47.3
  Background counts = 2040.3
  Rate = 0.02 +/- 0.004
[Tue Jul 10 07:33:10 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 07:33:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 07:33:10 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 07:33:10 2012] Source does appear to be extended
[Tue Jul 10 07:33:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 09:03:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 10 09:03:57 2012] Initial guess for spatial extent in simple fitting = 17.81"
[Tue Jul 10 09:03:57 2012] source mask rpix=4.1, npix_max = 84, mask sum = 52, frac = 0.616
[Tue Jul 10 09:03:57 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 17.81"
[Tue Jul 10 09:45:10 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jul 10 09:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src10.csv
[Tue Jul 10 09:45:10 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jul 10 09:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src10.csv
[Tue Jul 10 09:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 09:45:10 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jul 10 09:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jul 10 09:45:10 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jul 10 09:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jul 10 09:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 11:05:41 2012] Warning, spatial fit 10 centroid is now closest to src. 3
[Tue Jul 10 11:05:41 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 11:05:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 11:05:41 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 11:05:41 2012] Source does appear to be extended
[Tue Jul 10 11:05:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 11:58:32 2012] XMMSAS src. selection expression = ellipse(22381.662000, 31012.227400, 1068.492031, 1068.492031, 0.000000, X, Y)
[Tue Jul 10 11:58:32 2012] Writing source region out to fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src9_src.reg
[Tue Jul 10 11:58:32 2012] Extracting stamp from image fullrun_mos1_xmm0065140101_pi300-10000_cl_sm2.00.img.gz, (196, 296) - (319, 418)
[Tue Jul 10 11:58:32 2012] XMMSAS bgd. selection expression = annulus(22381.662000, 31012.227400, 1780.820051, 3561.640102, X, Y) && !ellipse(25267.168000, 31848.000000, 2634.224076, 2634.224076, 0.000000, X, Y) && !ellipse(24485.294000, 31567.666000, 1391.592040, 1391.592040, 0.000000, X, Y) && !ellipse(23170.904000, 31872.273240, 1446.528042, 1446.528042, 0.000000, X, Y) && !ellipse(23980.542633, 32830.899597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.758000, 30451.056000, 1317.112038, 1317.112038, 0.000000, X, Y) && !ellipse(24701.282196, 33873.872101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25242.655400, 29315.746000, 1301.512037, 1301.512037, 0.000000, X, Y) && !ellipse(26051.261800, 29714.118000, 769.796022, 769.796022, 0.000000, X, Y) && !ellipse(27000.066000, 30001.944000, 1338.888039, 1338.888039, 0.000000, X, Y) && !ellipse(23269.440000, 29461.472000, 1317.112038, 1317.112038, 0.000000, X, Y) && !ellipse(23343.878000, 33172.644000, 1507.304043, 1507.304043, 0.000000, X, Y)
[Tue Jul 10 11:58:32 2012] Writing fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src9.gif
[Tue Jul 10 12:11:29 2012] Mean detx,y = (2325.48, -6074.06) 
[Tue Jul 10 12:11:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 12:11:59 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 12:11:59 2012] Setting source spectrum file to fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jul 10 12:11:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Jul 10 16:34:43 2012] Updating aperture counts using extracted products
[Tue Jul 10 16:34:43 2012] Error reading totcts from fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jul 10 16:34:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 16:34:44 2012] Using photon index=1.80, rate=0.0158, arf fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src9.arf
[Tue Jul 10 16:34:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 16:34:44 2012] Updating source flux to 2.4e-13