[Tue Jul 10 03:01:49 2012] Detection parameters:
  Position = (276.2, 377.9) = 0 41 54.72 -9 17 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.0 +/- 26.8
  Background counts = 125.9
  Rate = 0.03 +/- 0.003

[Tue Jul 10 03:01:50 2012] Off-axis axis estimate = 5.98'
[Tue Jul 10 04:57:51 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 04:57:51 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Tue Jul 10 04:57:51 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.055
[Tue Jul 10 04:57:51 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.42"
[Tue Jul 10 06:14:30 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jul 10 06:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src4.csv
[Tue Jul 10 06:14:30 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jul 10 06:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src4.csv
[Tue Jul 10 06:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 06:14:31 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jul 10 06:14:31 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jul 10 06:14:31 2012] Fit fullrun_mos1_xmm0065140101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Jul 10 07:33:10 2012] Warning, spatial fit 4 centroid is now closest to src. 8
[Tue Jul 10 07:33:10 2012] Source 5 is offset by -2.153464 and -2.881345 pixels which is larger than
2 X fitted extent = 1.043669 x 1.043669, not incorporating fit results
[Tue Jul 10 07:33:10 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 07:33:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 07:33:10 2012] Assessing source extent using major
[Tue Jul 10 07:33:10 2012] Source does appear to be extended
[Tue Jul 10 07:33:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 07:33:10 2012] Source is confused with source 8
[Tue Jul 10 09:03:57 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 09:03:57 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Tue Jul 10 09:03:57 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.055
[Tue Jul 10 09:03:57 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.42"
[Tue Jul 10 09:45:10 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jul 10 09:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src4.csv
[Tue Jul 10 09:45:10 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jul 10 09:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src4.csv
[Tue Jul 10 09:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 09:45:10 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jul 10 09:45:10 2012] fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jul 10 09:45:10 2012] Fit fullrun_mos1_xmm0065140101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Jul 10 11:05:41 2012] Warning, spatial fit 4 centroid is now closest to src. 8
[Tue Jul 10 11:05:41 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 11:05:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 11:05:41 2012] Assessing source extent using major
[Tue Jul 10 11:05:41 2012] Source does appear to be extended
[Tue Jul 10 11:05:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 11:58:32 2012] XMMSAS src. selection expression = ellipse(23980.542633, 32830.899597, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 10 11:58:32 2012] Writing source region out to fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src5_src.reg
[Tue Jul 10 11:58:32 2012] Extracting stamp from image fullrun_mos1_xmm0065140101_pi300-10000_cl_sm2.00.img.gz, (239, 340) - (314, 415)
[Tue Jul 10 11:58:32 2012] XMMSAS bgd. selection expression = annulus(23980.542633, 32830.899597, 1087.500000, 2175.000000, X, Y) && !ellipse(25267.168000, 31848.000000, 2634.224076, 2634.224076, 0.000000, X, Y) && !ellipse(24485.294000, 31567.666000, 1391.592040, 1391.592040, 0.000000, X, Y) && !ellipse(23170.904000, 31872.273240, 1446.528042, 1446.528042, 0.000000, X, Y) && !ellipse(24334.758000, 30451.056000, 1317.112038, 1317.112038, 0.000000, X, Y) && !ellipse(24701.282196, 33873.872101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22381.662000, 31012.227400, 1424.656041, 1424.656041, 0.000000, X, Y) && !ellipse(27000.066000, 30001.944000, 1338.888039, 1338.888039, 0.000000, X, Y) && !ellipse(23269.440000, 29461.472000, 1317.112038, 1317.112038, 0.000000, X, Y) && !ellipse(23343.878000, 33172.644000, 1507.304043, 1507.304043, 0.000000, X, Y)
[Tue Jul 10 11:58:32 2012] Writing fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src5.gif
[Tue Jul 10 12:09:58 2012] Mean detx,y = (4493.35, -5336.67) 
[Tue Jul 10 12:09:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 12:10:07 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 12:10:07 2012] Setting source spectrum file to fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jul 10 12:10:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jul 10 12:26:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 10 12:26:00 2012] rmf not generated due to insufficient counts
[Tue Jul 10 16:34:43 2012] Updating aperture counts using extracted products
[Tue Jul 10 16:34:43 2012] Error reading totcts from fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jul 10 16:34:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 16:34:44 2012] Using photon index=1.80, rate=0.0291, arf fullrun_mos1_xmm0065140101_pi300-10000_pass1_cl_src5.arf
[Tue Jul 10 16:34:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 16:34:44 2012] Updating source flux to 4.2e-13
[Tue Jul 10 16:34:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting