[Wed Sep  5 21:36:24 2012] Detection parameters:
  Position = (355.4, 288.7) = 18 8 2.33 -36 57 60.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.8 +/- 11.1
  Background counts = 23.0
  Rate = 0.002 +/- 0.0004

[Wed Sep  5 21:36:24 2012] Off-axis axis estimate = 4.19'
[Wed Sep  5 22:01:23 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 22:01:23 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Wed Sep  5 22:01:23 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033
[Wed Sep  5 22:01:23 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.52"
[Wed Sep  5 22:37:46 2012] fullrun_mos2_xmm0064940101_pi300-10000_cl_pass0_src17.ximg exists
[Wed Sep  5 22:37:46 2012] fullrun_mos2_xmm0064940101_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Sep  5 22:37:46 2012] Fit fullrun_mos2_xmm0064940101_pi300-10000_cl_pass0_src17 appears to have run properly
[Wed Sep  5 22:37:46 2012] fullrun_mos2_xmm0064940101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Sep  5 22:37:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0064940101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Sep  5 22:37:46 2012] fullrun_mos2_xmm0064940101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Sep  5 22:37:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0064940101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Sep  5 22:37:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0064940101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0064940101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 22:37:56 2012] Spatial fit model total counts = 232.695000, observed total counts = 246.000000
[Wed Sep  5 22:37:56 2012] Offset between fit and detection position for source 22 = 0.587473 pixels
[Wed Sep  5 22:37:56 2012] 231.458500 total counts/ 198.065000 bgd. counts: snr = 2.372783
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.587473 pixels
  Position = (355.1, 288.1) = 18 8 2.42 -36 58 2.9
  Extent = 3.5" x 3.5", rotation angle = 0
  Source counts = 33.4 +/- 15.2
  Background counts = 198.1
  Rate = 0.0009 +/- 0.0004
[Wed Sep  5 22:37:56 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 22:37:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 22:37:56 2012] Assessing source extent using major
[Wed Sep  5 22:37:56 2012] Source does appear to be extended
[Wed Sep  5 22:37:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 23:04:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 23:04:43 2012] Initial guess for spatial extent in simple fitting = 3.52"
[Wed Sep  5 23:04:43 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.584
[Wed Sep  5 23:04:43 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 3.52"
[Wed Sep  5 23:31:38 2012] fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_src15.ximg exists
[Wed Sep  5 23:31:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_src15.csv
[Wed Sep  5 23:31:38 2012] fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Sep  5 23:31:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_src15.csv
[Wed Sep  5 23:31:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 23:31:38 2012] fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Sep  5 23:31:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Sep  5 23:31:38 2012] fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Sep  5 23:31:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Sep  5 23:31:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0064940101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 23:31:45 2012] Spatial fit model total counts = 290.777000, observed total counts = 246.000000
[Wed Sep  5 23:31:45 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 23:31:45 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 23:31:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 23:31:45 2012] Assessing source extent using major
[Wed Sep  5 23:31:45 2012] Source does appear to be extended
[Wed Sep  5 23:31:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 23:38:50 2012] XMMSAS src. selection expression = ellipse(30849.250755, 25017.934200, 211.113606, 211.113606, 0.000000, X, Y)
[Wed Sep  5 23:38:50 2012] Writing source region out to fullrun_mos2_xmm0064940101_pi300-10000_pass1_cl_src22_src.reg
[Wed Sep  5 23:38:50 2012] Extracting stamp from image fullrun_mos2_xmm0064940101_pi300-10000_cl_sm2.00.img.gz, (343, 276) - (367, 300)
[Wed Sep  5 23:38:50 2012] XMMSAS bgd. selection expression = annulus(30849.250755, 25017.934200, 351.856010, 703.712020, X, Y)
[Wed Sep  5 23:38:50 2012] Writing fullrun_mos2_xmm0064940101_pi300-10000_pass1_cl_src22.gif
[Wed Sep  5 23:42:09 2012] Mean detx,y = (6094.16, -640.44) 
[Wed Sep  5 23:42:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 23:42:19 2012] grppha failed
[Wed Sep  5 23:42:19 2012] Setting source spectrum file to fullrun_mos2_xmm0064940101_pi300-10000_pass1_cl_src22_src.pi.gz
[Wed Sep  5 23:42:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0064940101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Sep  5 23:44:13 2012] Not generating rmf since there are only 33 counts
[Wed Sep  5 23:44:13 2012] rmf not generated due to insufficient counts
[Wed Sep  5 23:44:42 2012] Updating aperture counts using extracted products
[Wed Sep  5 23:44:42 2012] Error reading totcts from fullrun_mos2_xmm0064940101_pi300-10000_pass1_cl_src22_src.pi.gz
[Wed Sep  5 23:44:42 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 23:44:44 2012] Flag p found in src. 22 procflags, skipping spectral fitting
[Wed Sep  5 23:44:44 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep  5 23:44:45 2012] xmm0064940101/analysis//spectral/fullrun_mos2_xmm0064940101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete