[Wed Jul 25 06:41:11 2012] Detection parameters:
  Position = (315.6, 314.0) = 3 58 54.38 10 26 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1030.1 +/- 39.3
  Background counts = 32.7
  Rate = 0.1 +/- 0.004

[Wed Jul 25 06:41:11 2012] Off-axis axis estimate = 1.68'
[Wed Jul 25 06:42:33 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 06:42:33 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jul 25 06:42:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.061
[Wed Jul 25 06:42:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Jul 25 06:49:21 2012] fullrun_pn_xmm0064600301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 25 06:49:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0064600301_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 06:49:21 2012] fullrun_pn_xmm0064600301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 25 06:49:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0064600301_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 06:49:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0064600301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0064600301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 06:49:21 2012] fullrun_pn_xmm0064600301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 25 06:49:21 2012] fullrun_pn_xmm0064600301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 25 06:49:21 2012] Fit fullrun_pn_xmm0064600301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 25 07:05:04 2012] Spatial fit model total counts = 845.962000, observed total counts = 844.000000
[Wed Jul 25 07:05:04 2012] Offset between fit and detection position for source 1 = 0.090628 pixels
[Wed Jul 25 07:05:04 2012] 847.270000 total counts/ 355.492000 bgd. counts: snr = 26.082798
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.090628 pixels
  Position = (315.5, 314.0) = 3 58 54.41 10 26 3.6
  Extent = 5.4 (5.0-5.8)", rotation angle = 0
  Source counts = 491.8 +/- 29.1
  Background counts = 355.5
  Rate = 0.09 +/- 0.005
[Wed Jul 25 07:05:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 07:05:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 07:05:04 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 07:05:04 2012] Source does appear to be extended
[Wed Jul 25 07:05:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 07:05:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 07:05:11 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Wed Jul 25 07:05:11 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.990
[Wed Jul 25 07:05:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.40"
[Wed Jul 25 07:13:11 2012] fullrun_pn_xmm0064600301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 07:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0064600301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 07:13:11 2012] fullrun_pn_xmm0064600301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 07:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0064600301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 07:13:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0064600301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0064600301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 07:13:11 2012] fullrun_pn_xmm0064600301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 07:13:11 2012] fullrun_pn_xmm0064600301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 07:13:11 2012] Fit fullrun_pn_xmm0064600301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 25 07:28:22 2012] Spatial fit model total counts = 846.020000, observed total counts = 844.000000
[Wed Jul 25 07:28:22 2012] Offset between fit and detection position for source 1 = 0.000862 pixels
[Wed Jul 25 07:28:22 2012] 847.294000 total counts/ 354.381000 bgd. counts: snr = 26.183944
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000862 pixels
  Position = (315.5, 314.0) = 3 58 54.41 10 26 3.6
  Extent = 5.4 (5.0-5.8)", rotation angle = 0
  Source counts = 492.9 +/- 29.1
  Background counts = 354.4
  Rate = 0.09 +/- 0.005
[Wed Jul 25 07:28:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 07:28:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 07:28:22 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 07:28:22 2012] Source does appear to be extended
[Wed Jul 25 07:28:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 07:28:30 2012] XMMSAS src. selection expression = ellipse(27398.973000, 27271.614200, 325.156209, 325.156209, 0.000000, X, Y)
[Wed Jul 25 07:28:30 2012] Writing source region out to fullrun_pn_xmm0064600301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 25 07:28:30 2012] Extracting stamp from image fullrun_pn_xmm0064600301_pi300-10000_cl_sm2.00.img.gz, (297, 295) - (334, 333)
[Wed Jul 25 07:28:30 2012] XMMSAS bgd. selection expression = annulus(27398.973000, 27271.614200, 541.927016, 1083.854031, X, Y)
[Wed Jul 25 07:28:30 2012] Writing fullrun_pn_xmm0064600301_pi300-10000_pass1_cl_src1.gif
[Wed Jul 25 07:28:34 2012] Mean detx,y = (61.11, -193.21) 
[Wed Jul 25 07:28:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 07:28:48 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 07:28:48 2012] Setting source spectrum file to fullrun_pn_xmm0064600301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 07:28:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0064600301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 25 07:45:53 2012] Updating aperture counts using extracted products
[Wed Jul 25 07:45:53 2012] Error reading totcts from fullrun_pn_xmm0064600301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 07:45:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 07:45:53 2012] Using photon index=1.80, rate=0.0896, arf fullrun_pn_xmm0064600301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 07:45:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 07:45:53 2012] Updating source flux to 2.8e-13
[Wed Jul 25 07:46:13 2012] Reading fit data from xmm0064600301/analysis//spectral/fullrun_pn_xmm0064600301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 25 07:46:13 2012] Spectral fit parameter nH value = 1.94147e+12
[Wed Jul 25 07:46:13 2012] Spectral fit parameter PhoIndex value = -0.548525
[Wed Jul 25 07:46:13 2012] Failed to get F(0.3-8.0) from xmm0064600301/analysis//spectral/fullrun_pn_xmm0064600301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 07:46:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 07:46:13 2012] Using Nh = 1.9e+12, photon index=-0.55, rate=0.0896, arf fullrun_pn_xmm0064600301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 07:46:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 07:46:13 2012] Updating source flux to 9.3e-13