[Wed Jul 25 06:41:25 2012] Detection parameters:
  Position = (223.8, 301.8) = 3 59 21.45 10 25 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.6 +/- 9.9
  Background counts = 5.7
  Rate = 0.008 +/- 0.001

[Wed Jul 25 06:41:25 2012] Off-axis axis estimate = 5.42'
[Wed Jul 25 06:49:21 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 06:49:21 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Wed Jul 25 06:49:21 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.924
[Wed Jul 25 06:49:21 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.14"
[Wed Jul 25 06:55:00 2012] fullrun_mos1_xmm0064600301_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul 25 06:55:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0064600301_pi300-10000_cl_pass0_src4.csv
[Wed Jul 25 06:55:00 2012] fullrun_mos1_xmm0064600301_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul 25 06:55:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0064600301_pi300-10000_cl_pass0_src4.csv
[Wed Jul 25 06:55:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0064600301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0064600301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 06:55:00 2012] fullrun_mos1_xmm0064600301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul 25 06:55:00 2012] fullrun_mos1_xmm0064600301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul 25 06:55:00 2012] Fit fullrun_mos1_xmm0064600301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jul 25 07:05:05 2012] Source 3 is offset by 0.412576 and 5.853003 pixels which is larger than
2 X fitted extent = 1.050193 x 1.050193, not incorporating fit results
[Wed Jul 25 07:05:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 07:05:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 07:05:05 2012] Assessing source extent using major
[Wed Jul 25 07:05:05 2012] Source does appear to be extended
[Wed Jul 25 07:05:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 07:13:12 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 07:13:12 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Wed Jul 25 07:13:12 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.924
[Wed Jul 25 07:13:12 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.14"
[Wed Jul 25 07:20:03 2012] fullrun_mos1_xmm0064600301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 25 07:20:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0064600301_pi300-10000_cl_pass1_src4.csv
[Wed Jul 25 07:20:03 2012] fullrun_mos1_xmm0064600301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 25 07:20:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0064600301_pi300-10000_cl_pass1_src4.csv
[Wed Jul 25 07:20:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0064600301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0064600301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 07:20:03 2012] fullrun_mos1_xmm0064600301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 25 07:20:03 2012] fullrun_mos1_xmm0064600301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 25 07:20:03 2012] Fit fullrun_mos1_xmm0064600301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul 25 07:28:23 2012] Spatial fit model total counts = 109.997000, observed total counts = 110.000000
[Wed Jul 25 07:28:23 2012] Offset between fit and detection position for source 3 = 0.142391 pixels
[Wed Jul 25 07:28:23 2012] 111.550000 total counts/ 72.267600 bgd. counts: snr = 4.620896
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.142391 pixels
  Position = (223.7, 301.6) = 3 59 21.47 10 25 9.7
  Extent = 5.3 (3.7-7.6)", rotation angle = 0
  Source counts = 39.3 +/- 10.6
  Background counts = 72.3
  Rate = 0.003 +/- 0.0009
[Wed Jul 25 07:28:23 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 07:28:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 07:28:23 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 07:28:23 2012] Source does appear to be extended
[Wed Jul 25 07:28:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 07:37:13 2012] XMMSAS src. selection expression = ellipse(19415.296600, 26193.785600, 320.485809, 320.485809, 0.000000, X, Y)
[Wed Jul 25 07:37:13 2012] Writing source region out to fullrun_mos1_xmm0064600301_pi300-10000_pass1_cl_src3_src.reg
[Wed Jul 25 07:37:13 2012] Extracting stamp from image fullrun_mos1_xmm0064600301_pi300-10000_cl_sm2.00.img.gz, (205, 283) - (242, 320)
[Wed Jul 25 07:37:13 2012] XMMSAS bgd. selection expression = annulus(19415.296600, 26193.785600, 534.143015, 1068.286031, X, Y)
[Wed Jul 25 07:37:13 2012] Writing fullrun_mos1_xmm0064600301_pi300-10000_pass1_cl_src3.gif
[Wed Jul 25 07:37:58 2012] Mean detx,y = (-2702.69, -7758.02) 
[Wed Jul 25 07:37:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 07:38:07 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 07:38:07 2012] Setting source spectrum file to fullrun_mos1_xmm0064600301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 25 07:38:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0064600301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jul 25 07:42:35 2012] Not generating rmf since there are only 39 counts
[Wed Jul 25 07:42:36 2012] rmf not generated due to insufficient counts
[Wed Jul 25 07:45:53 2012] Updating aperture counts using extracted products
[Wed Jul 25 07:45:53 2012] Error reading totcts from fullrun_mos1_xmm0064600301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 25 07:45:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 07:45:53 2012] Using photon index=1.80, rate=0.00337, arf fullrun_mos1_xmm0064600301_pi300-10000_pass1_cl_src3.arf
[Wed Jul 25 07:45:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 07:45:53 2012] Updating source flux to 7.4e-14
[Wed Jul 25 07:45:54 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Wed Jul 25 07:45:54 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting