[Mon Jun 11 22:20:23 2012] Detection parameters:
  Position = (230.5, 376.0) = 21 52 29.19 -27 27 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 526.3 +/- 28.7
  Background counts = 34.5
  Rate = 0.02 +/- 0.001

[Mon Jun 11 22:20:24 2012] Off-axis axis estimate = 7.48'
[Mon Jun 11 22:21:47 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 22:21:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 22:21:47 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Mon Jun 11 22:21:47 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.932
[Mon Jun 11 22:21:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.17"
[Mon Jun 11 22:40:19 2012] fullrun_pn_xmm0062940401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 11 22:40:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0062940401_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 22:40:19 2012] fullrun_pn_xmm0062940401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 11 22:40:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0062940401_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 22:40:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0062940401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0062940401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 22:40:19 2012] fullrun_pn_xmm0062940401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 11 22:40:19 2012] fullrun_pn_xmm0062940401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 11 22:40:19 2012] Fit fullrun_pn_xmm0062940401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 11 23:02:16 2012] Spatial fit model total counts = 991.897000, observed total counts = 989.000000
[Mon Jun 11 23:02:16 2012] Offset between fit and detection position for source 1 = 0.127020 pixels
[Mon Jun 11 23:02:16 2012] 988.188000 total counts/ 598.339000 bgd. counts: snr = 15.937594
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.127020 pixels
  Position = (230.4, 376.1) = 21 52 29.23 -27 27 13.0
  Extent = 6.4 (5.7-7.2)", rotation angle = 0
  Source counts = 389.8 +/- 31.4
  Background counts = 598.3
  Rate = 0.02 +/- 0.001
[Mon Jun 11 23:02:16 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 23:02:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 23:02:16 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 23:02:16 2012] Source does appear to be extended
[Mon Jun 11 23:02:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 23:02:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 23:02:25 2012] Initial guess for spatial extent in simple fitting = 6.39"
[Mon Jun 11 23:02:25 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.032
[Mon Jun 11 23:02:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.39"
[Mon Jun 11 23:21:44 2012] fullrun_pn_xmm0062940401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 11 23:21:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0062940401_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 23:21:44 2012] fullrun_pn_xmm0062940401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 11 23:21:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0062940401_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 23:21:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0062940401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0062940401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 23:21:44 2012] fullrun_pn_xmm0062940401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 11 23:21:44 2012] fullrun_pn_xmm0062940401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 11 23:21:44 2012] Fit fullrun_pn_xmm0062940401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 11 23:44:14 2012] Spatial fit model total counts = 840.000000, observed total counts = 840.000000
[Mon Jun 11 23:44:14 2012] Offset between fit and detection position for source 1 = 0.021838 pixels
[Mon Jun 11 23:44:14 2012] 836.529000 total counts/ 465.625000 bgd. counts: snr = 17.188713
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021838 pixels
  Position = (230.4, 376.1) = 21 52 29.23 -27 27 12.9
  Extent = 6.1 (5.4-6.8)", rotation angle = 0
  Source counts = 370.9 +/- 28.9
  Background counts = 465.6
  Rate = 0.02 +/- 0.001
[Mon Jun 11 23:44:14 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 23:44:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 23:44:14 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 23:44:14 2012] Source does appear to be extended
[Mon Jun 11 23:44:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 23:44:23 2012] XMMSAS src. selection expression = ellipse(19994.819600, 32671.750200, 363.579610, 363.579610, 0.000000, X, Y)
[Mon Jun 11 23:44:23 2012] Writing source region out to fullrun_pn_xmm0062940401_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 11 23:44:23 2012] Extracting stamp from image fullrun_pn_xmm0062940401_pi300-10000_cl_sm2.00.img.gz, (209, 355) - (251, 397)
[Mon Jun 11 23:44:23 2012] XMMSAS bgd. selection expression = annulus(19994.819600, 32671.750200, 605.966017, 1211.932035, X, Y)
[Mon Jun 11 23:44:23 2012] Writing fullrun_pn_xmm0062940401_pi300-10000_pass1_cl_src1.gif
[Mon Jun 11 23:44:30 2012] Mean detx,y = (-8887.35, -2923.16) 
[Mon Jun 11 23:44:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 23:44:40 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 23:44:40 2012] Setting source spectrum file to fullrun_pn_xmm0062940401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 11 23:44:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0062940401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 00:21:43 2012] Updating aperture counts using extracted products
[Tue Jun 12 00:21:43 2012] Error reading totcts from fullrun_pn_xmm0062940401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 00:21:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 00:21:43 2012] Using photon index=1.80, rate=0.0176, arf fullrun_pn_xmm0062940401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 00:21:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 00:21:43 2012] Updating source flux to 9.8e-14
[Tue Jun 12 00:22:13 2012] Reading fit data from xmm0062940401/analysis//spectral/fullrun_pn_xmm0062940401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 00:22:13 2012] Spectral fit parameter nH value = 340942000000.0
[Tue Jun 12 00:22:13 2012] Spectral fit parameter PhoIndex value = 1.84252
[Tue Jun 12 00:22:13 2012] Failed to get F(0.3-8.0) from xmm0062940401/analysis//spectral/fullrun_pn_xmm0062940401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 00:22:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 00:22:13 2012] Using Nh = 3.4e+11, photon index=1.84, rate=0.0176, arf fullrun_pn_xmm0062940401_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 00:22:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 00:22:13 2012] Updating source flux to 9.5e-14