[Mon Jun 11 22:20:37 2012] Detection parameters:
  Position = (436.3, 167.0) = 21 51 21.83 -27 42 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 819.7 +/- 36.0
  Background counts = 8.9
  Rate = 0.03 +/- 0.002

[Mon Jun 11 22:20:37 2012] Off-axis axis estimate = 13.81'
[Mon Jun 11 22:40:19 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 22:40:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 22:40:19 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Mon Jun 11 22:40:19 2012] source mask rpix=3.1, npix_max = 50, mask sum = 54, frac = 1.062
[Mon Jun 11 22:40:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.33"
[Mon Jun 11 22:54:35 2012] fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 11 22:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 22:54:35 2012] fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 11 22:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 22:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 22:54:35 2012] fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 11 22:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 11 22:54:35 2012] fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 11 22:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 11 22:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0062940401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 23:02:18 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.686586 pixels away
[Mon Jun 11 23:02:18 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 23:02:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 23:02:18 2012] Assessing source extent using major
[Mon Jun 11 23:02:18 2012] Source does appear to be extended
[Mon Jun 11 23:02:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 23:21:44 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 23:21:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 23:21:44 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Mon Jun 11 23:21:44 2012] source mask rpix=3.1, npix_max = 50, mask sum = 54, frac = 1.062
[Mon Jun 11 23:21:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.33"
[Mon Jun 11 23:37:16 2012] fullrun_mos1_xmm0062940401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 11 23:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0062940401_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 23:37:16 2012] fullrun_mos1_xmm0062940401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 11 23:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0062940401_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 23:37:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0062940401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0062940401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 23:37:16 2012] fullrun_mos1_xmm0062940401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 11 23:37:16 2012] fullrun_mos1_xmm0062940401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 11 23:37:16 2012] Fit fullrun_mos1_xmm0062940401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 11 23:44:16 2012] Spatial fit model total counts = 1013.700000, observed total counts = 969.000000
[Mon Jun 11 23:44:16 2012] Offset between fit and detection position for source 5 = 0.202827 pixels
[Mon Jun 11 23:44:16 2012] 1012.752000 total counts/ 453.915000 bgd. counts: snr = 26.229976
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.202827 pixels
  Position = (436.4, 166.9) = 21 51 21.79 -27 42 22.7
  Extent = 7.0 (6.4-7.6)", rotation angle = 0
  Source counts = 558.8 +/- 31.8
  Background counts = 453.9
  Rate = 0.02 +/- 0.001
[Mon Jun 11 23:44:16 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 23:44:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 23:44:16 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 23:44:16 2012] Source does appear to be extended
[Mon Jun 11 23:44:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 00:08:35 2012] XMMSAS src. selection expression = ellipse(37920.464040, 14469.279600, 422.567412, 422.567412, 0.000000, X, Y)
[Tue Jun 12 00:08:35 2012] Writing source region out to fullrun_mos1_xmm0062940401_pi300-10000_pass1_cl_src5_src.reg
[Tue Jun 12 00:08:35 2012] Extracting stamp from image fullrun_mos1_xmm0062940401_pi300-10000_cl_sm2.00.img.gz, (412, 143) - (461, 191)
[Tue Jun 12 00:08:35 2012] XMMSAS bgd. selection expression = annulus(37920.464040, 14469.279600, 704.279020, 1408.558041, X, Y)
[Tue Jun 12 00:08:35 2012] Writing fullrun_mos1_xmm0062940401_pi300-10000_pass1_cl_src5.gif
[Tue Jun 12 00:08:37 2012] Mean detx,y = (-8148.75, 13788.45) 
[Tue Jun 12 00:08:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 00:08:53 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 00:08:53 2012] Setting source spectrum file to fullrun_mos1_xmm0062940401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jun 12 00:08:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0062940401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jun 12 00:21:44 2012] Updating aperture counts using extracted products
[Tue Jun 12 00:21:44 2012] Error reading totcts from fullrun_mos1_xmm0062940401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jun 12 00:21:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 00:21:44 2012] Using photon index=1.80, rate=0.0236, arf fullrun_mos1_xmm0062940401_pi300-10000_pass1_cl_src5.arf
[Tue Jun 12 00:21:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 00:21:44 2012] Updating source flux to 7.3e-13
[Tue Jun 12 00:21:53 2012] Reading fit data from xmm0062940401/analysis//spectral/fullrun_mos1_xmm0062940401_pi300-10000_pass1_cl_src5_pl.csv
[Tue Jun 12 00:21:53 2012] Spectral fit parameter nH value = 2.05298e+20
[Tue Jun 12 00:21:53 2012] Spectral fit parameter PhoIndex value = 1.67022
[Tue Jun 12 00:21:53 2012] Failed to get F(0.3-8.0) from xmm0062940401/analysis//spectral/fullrun_mos1_xmm0062940401_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 00:21:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 00:21:53 2012] Using Nh = 2.1e+20, photon index=1.67, rate=0.0236, arf fullrun_mos1_xmm0062940401_pi300-10000_pass1_cl_src5.arf
[Tue Jun 12 00:21:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 00:21:53 2012] Updating source flux to 7.9e-13