[Tue Sep 27 18:33:27 2011] Detection parameters:
  Position = (316.5, 320.5) = 16 29 55.98 78 13 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.3 +/- 13.2
  Background counts = 19.7
  Rate = 0.01 +/- 0.002

[Tue Sep 27 18:33:27 2011] Off-axis axis estimate = 2.07'
[Tue Sep 27 18:57:49 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 18:57:49 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Sep 27 18:57:49 2011] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.917
[Tue Sep 27 18:57:49 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.46"
[Tue Sep 27 19:13:11 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_src6.ximg exists
[Tue Sep 27 19:13:11 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Sep 27 19:13:11 2011] Fit fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_src6 appears to have run properly
[Tue Sep 27 19:13:11 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Sep 27 19:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Sep 27 19:13:11 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Sep 27 19:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Sep 27 19:13:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 19:13:17 2011] Source 7 is offset by -6.407797 and 6.386343 pixels which is larger than
2 X fitted extent = 0.857683 x 0.873200, not incorporating fit results
[Tue Sep 27 19:13:17 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 19:13:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 19:13:17 2011] Assessing source extent using major
[Tue Sep 27 19:13:17 2011] Source does appear to be extended
[Tue Sep 27 19:13:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 19:36:50 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 19:36:50 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Sep 27 19:36:50 2011] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.917
[Tue Sep 27 19:36:50 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 7.46"
[Tue Sep 27 19:50:14 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_src6.ximg exists
[Tue Sep 27 19:50:14 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Sep 27 19:50:14 2011] Fit fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_src6 appears to have run properly
[Tue Sep 27 19:50:14 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Sep 27 19:50:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Sep 27 19:50:14 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Sep 27 19:50:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Sep 27 19:50:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 19:50:22 2011] Source 7 is offset by -5.647176 and -6.575979 pixels which is larger than
2 X fitted extent = 6.100874 x 0.762607, not incorporating fit results
[Tue Sep 27 19:50:22 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 19:50:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 19:50:22 2011] Assessing source extent using major
[Tue Sep 27 19:50:22 2011] Source does appear to be extended
[Tue Sep 27 19:50:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:05:22 2011] XMMSAS src. selection expression = ellipse(27482.969666, 27837.163849, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep 27 20:05:22 2011] Writing source region out to fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src7_src.reg
[Tue Sep 27 20:05:22 2011] Extracting stamp from image fullrun_mos2_xmm0061940901_pi300-10000_cl_sm2.00.img.gz, (279, 283) - (354, 358)
[Tue Sep 27 20:05:22 2011] XMMSAS bgd. selection expression = annulus(27482.969666, 27837.163849, 1087.500000, 2175.000000, X, Y) && !ellipse(29514.512080, 27853.238600, 424.440012, 424.440012, 0.000000, X, Y) && !ellipse(25014.490840, 25557.309200, 370.028605, 370.028605, 0.000000, X, Y) && !ellipse(28202.607000, 25813.588400, 333.870981, 333.870981, 0.000000, X, Y)
[Tue Sep 27 20:05:22 2011] Writing fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src7.gif
[Tue Sep 27 20:05:53 2011] Mean detx,y = (1025.65, -4110.33) 
[Tue Sep 27 20:05:54 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 20:05:59 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 20:05:59 2011] Setting source spectrum file to fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Sep 27 20:05:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Sep 27 20:13:21 2011] Not generating rmf since there are only 92 counts
[Tue Sep 27 20:13:21 2011] rmf not generated due to insufficient counts
[Tue Sep 27 20:13:45 2011] Updating aperture counts using extracted products
[Tue Sep 27 20:13:45 2011] Error reading totcts from fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Sep 27 20:13:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:13:45 2011] Using photon index=1.80, rate=0.0119, arf fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src7.arf
[Tue Sep 27 20:13:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 20:13:45 2011] Updating source flux to 1.2e-13
[Tue Sep 27 20:13:47 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting