[Tue Sep 27 18:33:27 2011] Detection parameters:
  Position = (201.6, 304.1) = 16 32 38.93 78 11 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 266.8 +/- 20.8
  Background counts = 20.9
  Rate = 0.04 +/- 0.003

[Tue Sep 27 18:33:27 2011] Off-axis axis estimate = 7.03'
[Tue Sep 27 18:57:49 2011] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 18:57:49 2011] Initial guess for spatial extent in simple fitting = 9.95"
[Tue Sep 27 18:57:49 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.966
[Tue Sep 27 18:57:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.95"
[Tue Sep 27 19:13:11 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_src1.ximg exists
[Tue Sep 27 19:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 19:13:11 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Sep 27 19:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 19:13:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 19:13:11 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 19:13:11 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 19:13:11 2011] Fit fullrun_mos2_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 19:13:17 2011] Spatial fit model total counts = 275.000000, observed total counts = 275.000000
[Tue Sep 27 19:13:17 2011] Offset between fit and detection position for source 1 = 0.130298 pixels
[Tue Sep 27 19:13:17 2011] 277.927000 total counts/ 134.609000 bgd. counts: snr = 12.352751
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.130298 pixels
  Position = (201.5, 304.2) = 16 32 38.97 78 11 55.1
  Extent = 5.5 (4.8-6.4)", rotation angle = 0
  Source counts = 143.3 +/- 16.7
  Background counts = 134.6
  Rate = 0.02 +/- 0.002
[Tue Sep 27 19:13:17 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 19:13:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 19:13:17 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 19:13:17 2011] Source does appear to be extended
[Tue Sep 27 19:13:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 19:36:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 19:36:50 2011] Initial guess for spatial extent in simple fitting = 5.49"
[Tue Sep 27 19:36:50 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.967
[Tue Sep 27 19:36:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Tue Sep 27 19:50:14 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_src1.ximg exists
[Tue Sep 27 19:50:14 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Sep 27 19:50:14 2011] Fit fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Sep 27 19:50:14 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 19:50:14 2011] fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 19:50:14 2011] Fit fullrun_mos2_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 19:50:22 2011] Spatial fit model total counts = 250.000000, observed total counts = 250.000000
[Tue Sep 27 19:50:22 2011] Offset between fit and detection position for source 1 = 0.010973 pixels
[Tue Sep 27 19:50:22 2011] 252.960000 total counts/ 115.010000 bgd. counts: snr = 12.863345
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010973 pixels
  Position = (201.6, 304.2) = 16 32 38.96 78 11 55.1
  Extent = 5.8 (4.6-6.5)" x 4.7 (3.8-5.9)", rotation angle = 69 (90-90) degrees
  Source counts = 137.9 +/- 15.9
  Background counts = 115.0
  Rate = 0.02 +/- 0.002
[Tue Sep 27 19:50:22 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 19:50:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 19:50:22 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 19:50:22 2011] Source does appear to be extended
[Tue Sep 27 19:50:22 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.78
[Tue Sep 27 20:05:21 2011] XMMSAS src. selection expression = ellipse(17486.786000, 26417.091200, 347.960410, 284.986208, 69.117939, X, Y)
[Tue Sep 27 20:05:21 2011] Writing source region out to fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src1_src.reg
[Tue Sep 27 20:05:21 2011] Extracting stamp from image fullrun_mos2_xmm0061940901_pi300-10000_cl_sm2.00.img.gz, (182, 284) - (222, 324)
[Tue Sep 27 20:05:21 2011] XMMSAS bgd. selection expression = annulus(17486.786000, 26417.091200, 579.934017, 1159.868033, X, Y)
[Tue Sep 27 20:05:21 2011] Writing fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src1.gif
[Tue Sep 27 20:05:23 2011] Mean detx,y = (-5332.74, 3733.57) 
[Tue Sep 27 20:05:23 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 20:05:27 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 20:05:27 2011] Setting source spectrum file to fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Sep 27 20:05:27 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Sep 27 20:13:45 2011] Updating aperture counts using extracted products
[Tue Sep 27 20:13:45 2011] Error reading totcts from fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Sep 27 20:13:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:13:45 2011] Using photon index=1.80, rate=0.0199, arf fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src1.arf
[Tue Sep 27 20:13:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 20:13:45 2011] Updating source flux to 3.5e-13
[Tue Sep 27 20:13:58 2011] Reading fit data from xmm0061940901/analysis//spectral/fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src1_pl.csv
[Tue Sep 27 20:13:58 2011] Spectral fit parameter nH value = 4.25887e+21
[Tue Sep 27 20:13:58 2011] Spectral fit parameter PhoIndex value = 4.67832
[Tue Sep 27 20:13:58 2011] Failed to get F(0.3-8.0) from xmm0061940901/analysis//spectral/fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 20:13:58 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:13:58 2011] Using Nh = 4.3e+21, photon index=4.68, rate=0.0199, arf fullrun_mos2_xmm0061940901_pi300-10000_pass1_cl_src1.arf
[Tue Sep 27 20:13:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 20:13:58 2011] Updating source flux to 2.2e-13