[Tue Sep 27 18:33:14 2011] Detection parameters:
  Position = (349.8, 204.7) = 16 29 9.53 78 4 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.7 +/- 14.4
  Background counts = 13.9
  Rate = 0.01 +/- 0.002

[Tue Sep 27 18:33:14 2011] Off-axis axis estimate = 7.75'
[Tue Sep 27 18:47:11 2011] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 18:47:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 18:47:11 2011] Initial guess for spatial extent in simple fitting = 10.30"
[Tue Sep 27 18:47:11 2011] source mask rpix=2.4, npix_max = 32, mask sum = 35, frac = 1.063
[Tue Sep 27 18:47:11 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.30"
[Tue Sep 27 18:57:49 2011] fullrun_mos1_xmm0061940901_pi300-10000_cl_pass0_src3.ximg exists
[Tue Sep 27 18:57:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061940901_pi300-10000_cl_pass0_src3.csv
[Tue Sep 27 18:57:49 2011] fullrun_mos1_xmm0061940901_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Sep 27 18:57:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061940901_pi300-10000_cl_pass0_src3.csv
[Tue Sep 27 18:57:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061940901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061940901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 18:57:49 2011] fullrun_mos1_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 18:57:49 2011] fullrun_mos1_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 18:57:49 2011] Fit fullrun_mos1_xmm0061940901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 19:13:15 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.161158 pixels away
[Tue Sep 27 19:13:15 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 19:13:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 19:13:15 2011] Assessing source extent using major
[Tue Sep 27 19:13:15 2011] Source does appear to be extended
[Tue Sep 27 19:13:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 19:26:09 2011] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 19:26:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 19:26:09 2011] Initial guess for spatial extent in simple fitting = 10.30"
[Tue Sep 27 19:26:09 2011] source mask rpix=2.4, npix_max = 32, mask sum = 35, frac = 1.063
[Tue Sep 27 19:26:09 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 10.30"
[Tue Sep 27 19:36:50 2011] fullrun_mos1_xmm0061940901_pi300-10000_cl_pass1_src3.ximg exists
[Tue Sep 27 19:36:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061940901_pi300-10000_cl_pass1_src3.csv
[Tue Sep 27 19:36:50 2011] fullrun_mos1_xmm0061940901_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Sep 27 19:36:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061940901_pi300-10000_cl_pass1_src3.csv
[Tue Sep 27 19:36:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061940901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061940901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 19:36:50 2011] fullrun_mos1_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Sep 27 19:36:50 2011] fullrun_mos1_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Sep 27 19:36:50 2011] Fit fullrun_mos1_xmm0061940901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep 27 19:50:20 2011] Spatial fit model total counts = 142.971000, observed total counts = 143.000000
[Tue Sep 27 19:50:20 2011] Offset between fit and detection position for source 3 = 0.797112 pixels
[Tue Sep 27 19:50:20 2011] 149.850500 total counts/ 104.221000 bgd. counts: snr = 4.469594
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.797112 pixels
  Position = (349.3, 204.1) = 16 29 10.23 78 4 41.0
  Extent = 7.2 (5.5-9.2)", rotation angle = 0
  Source counts = 45.6 +/- 12.2
  Background counts = 104.2
  Rate = 0.007 +/- 0.002
[Tue Sep 27 19:50:20 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 19:50:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 19:50:20 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 19:50:20 2011] Source does appear to be extended
[Tue Sep 27 19:50:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:03:17 2011] XMMSAS src. selection expression = ellipse(30337.308000, 17704.012800, 429.079219, 429.079219, 0.000000, X, Y)
[Tue Sep 27 20:03:17 2011] Writing source region out to fullrun_mos1_xmm0061940901_pi300-10000_pass1_cl_src3_src.reg
[Tue Sep 27 20:03:17 2011] Extracting stamp from image fullrun_mos1_xmm0061940901_pi300-10000_cl_sm2.00.img.gz, (325, 179) - (374, 229)
[Tue Sep 27 20:03:17 2011] XMMSAS bgd. selection expression = annulus(30337.308000, 17704.012800, 715.132031, 1430.264062, X, Y)
[Tue Sep 27 20:03:17 2011] Writing fullrun_mos1_xmm0061940901_pi300-10000_pass1_cl_src3.gif
[Tue Sep 27 20:03:31 2011] Mean detx,y = (1643.72, -10170.31) 
[Tue Sep 27 20:03:32 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 20:03:37 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 20:03:37 2011] Setting source spectrum file to fullrun_mos1_xmm0061940901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Sep 27 20:03:37 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0061940901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Sep 27 20:05:07 2011] Not generating rmf since there are only 45 counts
[Tue Sep 27 20:05:07 2011] rmf not generated due to insufficient counts
[Tue Sep 27 20:13:45 2011] Updating aperture counts using extracted products
[Tue Sep 27 20:13:45 2011] Error reading totcts from fullrun_mos1_xmm0061940901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Sep 27 20:13:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:13:45 2011] Using photon index=1.80, rate=0.0067, arf fullrun_mos1_xmm0061940901_pi300-10000_pass1_cl_src3.arf
[Tue Sep 27 20:13:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 20:13:45 2011] Updating source flux to 1.4e-13
[Tue Sep 27 20:13:46 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 20:13:47 2011] xmm0061940901/analysis//spectral/fullrun_mos1_xmm0061940901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete