[Tue Sep 27 12:54:31 2011] Detection parameters:
  Position = (316.5, 393.3) = 16 30 54.58 78 16 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.0 +/- 6.6
  Background counts = 1.2
  Rate = 0.01 +/- 0.002

[Tue Sep 27 12:54:31 2011] Off-axis axis estimate = 7.00'
[Tue Sep 27 12:55:01 2011] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 12:55:01 2011] Initial guess for spatial extent in simple fitting = 9.93"
[Tue Sep 27 12:55:01 2011] source mask rpix=2.3, npix_max = 30, mask sum = 21, frac = 0.678
[Tue Sep 27 12:55:01 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 9.93"
[Tue Sep 27 13:12:13 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src8.ximg exists
[Tue Sep 27 13:12:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src8.csv
[Tue Sep 27 13:12:13 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Sep 27 13:12:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src8.csv
[Tue Sep 27 13:12:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:12:14 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Sep 27 13:12:14 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Sep 27 13:12:14 2011] Fit fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Sep 27 13:31:40 2011] Spatial fit model total counts = 37.999600, observed total counts = 38.000000
[Tue Sep 27 13:31:40 2011] Offset between fit and detection position for source 9 = 0.732487 pixels
[Tue Sep 27 13:31:40 2011] 37.777520 total counts/ 9.894620 bgd. counts: snr = 8.864176
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.732487 pixels
  Position = (316.4, 392.6) = 16 30 54.64 78 16 48.6
  Extent = 6.4 (4.5-8.8)", rotation angle = 0
  Source counts = 27.9 +/- 6.1
  Background counts = 9.9
  Rate = 0.006 +/- 0.001
[Tue Sep 27 13:31:40 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 13:31:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 13:31:40 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 13:31:40 2011] Source does appear to be extended
[Tue Sep 27 13:31:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:31:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:31:47 2011] Initial guess for spatial extent in simple fitting = 6.45"
[Tue Sep 27 13:31:47 2011] source mask rpix=1.5, npix_max = 15, mask sum = 13, frac = 0.827
[Tue Sep 27 13:31:47 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 6.45"
[Tue Sep 27 13:49:41 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Sep 27 13:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061940301_pi300-10000_cl_pass1_src7.csv
[Tue Sep 27 13:49:41 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Sep 27 13:49:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061940301_pi300-10000_cl_pass1_src7.csv
[Tue Sep 27 13:49:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061940301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061940301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:49:41 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Sep 27 13:49:41 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Sep 27 13:49:41 2011] Fit fullrun_mos1_xmm0061940301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Sep 27 14:09:31 2011] Spatial fit model total counts = 37.999700, observed total counts = 38.000000
[Tue Sep 27 14:09:31 2011] Offset between fit and detection position for source 9 = 0.010865 pixels
[Tue Sep 27 14:09:31 2011] 37.780600 total counts/ 10.075700 bgd. counts: snr = 8.728085
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.010865 pixels
  Position = (316.4, 392.6) = 16 30 54.65 78 16 48.6
  Extent = 6.3 (4.5-8.8)", rotation angle = 0
  Source counts = 27.7 +/- 6.1
  Background counts = 10.1
  Rate = 0.006 +/- 0.001
[Tue Sep 27 14:09:31 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:09:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:09:31 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:09:31 2011] Source does appear to be extended
[Tue Sep 27 14:09:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:09:36 2011] XMMSAS src. selection expression = ellipse(27478.934200, 34107.993600, 380.796011, 380.796011, 0.000000, X, Y)
[Tue Sep 27 14:09:36 2011] Writing source region out to fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src9_src.reg
[Tue Sep 27 14:09:36 2011] Extracting stamp from image fullrun_mos1_xmm0061940301_pi300-10000_cl_sm2.00.img.gz, (295, 371) - (338, 414)
[Tue Sep 27 14:09:36 2011] XMMSAS bgd. selection expression = annulus(27478.934200, 34107.993600, 634.660018, 1269.320037, X, Y)
[Tue Sep 27 14:09:36 2011] Writing fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src9.gif
[Tue Sep 27 14:11:10 2011] Mean detx,y = (6877.24, -2251.28) 
[Tue Sep 27 14:11:11 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 14:11:26 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 14:11:26 2011] Setting source spectrum file to fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Sep 27 14:11:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Sep 27 14:12:56 2011] Not generating rmf since there are only 27 counts
[Tue Sep 27 14:12:56 2011] rmf not generated due to insufficient counts
[Tue Sep 27 14:16:46 2011] Updating aperture counts using extracted products
[Tue Sep 27 14:16:46 2011] Error reading totcts from fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Sep 27 14:16:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 14:16:46 2011] Using photon index=1.80, rate=0.00556, arf fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src9.arf
[Tue Sep 27 14:16:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 14:16:46 2011] Updating source flux to 9.6e-14
[Tue Sep 27 14:16:47 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 14:16:48 2011] xmm0061940301/analysis//spectral/fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete