[Tue Sep 27 12:54:31 2011] Detection parameters:
  Position = (165.1, 300.0) = 16 34 28.91 78 10 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.0 +/- 6.3
  Background counts = 1.2
  Rate = 0.005 +/- 0.001

[Tue Sep 27 12:54:31 2011] Off-axis axis estimate = 9.67'
[Tue Sep 27 12:55:01 2011] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 12:55:01 2011] Initial guess for spatial extent in simple fitting = 11.26"
[Tue Sep 27 12:55:01 2011] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.917
[Tue Sep 27 12:55:01 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 11.26"
[Tue Sep 27 13:12:13 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Sep 27 13:12:13 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src5.csv
[Tue Sep 27 13:12:13 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Sep 27 13:12:13 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src5.csv
[Tue Sep 27 13:12:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:12:13 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Sep 27 13:12:13 2011] fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Sep 27 13:12:13 2011] Fit fullrun_mos1_xmm0061940301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Sep 27 13:31:40 2011] Spatial fit model total counts = 31.793800, observed total counts = 31.000000
[Tue Sep 27 13:31:40 2011] Offset between fit and detection position for source 6 = 0.323336 pixels
[Tue Sep 27 13:31:40 2011] 32.155010 total counts/ 22.813300 bgd. counts: snr = 1.955836
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.323336 pixels
  Position = (165.4, 300.1) = 16 34 28.47 78 10 2.2
  Extent = 2.9 (2.8-4.2)", rotation angle = 0
  Source counts = 9.3 +/- 5.7
  Background counts = 22.8
  Rate = 0.002 +/- 0.001
[Tue Sep 27 13:31:40 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 13:31:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 13:31:40 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 13:31:40 2011] Source does appear to be extended
[Tue Sep 27 13:31:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:31:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:31:47 2011] Initial guess for spatial extent in simple fitting = 2.88"
[Tue Sep 27 13:31:47 2011] Spatial fitting skipped for pass 1: source                                 has 9.3 net counts, is at off-axis angle 9.7'
[Tue Sep 27 14:09:31 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:09:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:09:31 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:09:31 2011] Source does appear to be extended
[Tue Sep 27 14:09:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:09:36 2011] XMMSAS src. selection expression = ellipse(14341.168400, 26056.692600, 172.989288, 172.989288, 0.000000, X, Y)
[Tue Sep 27 14:09:36 2011] Writing source region out to fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src6_src.reg
[Tue Sep 27 14:09:36 2011] Extracting stamp from image fullrun_mos1_xmm0061940301_pi300-10000_cl_sm2.00.img.gz, (155, 290) - (175, 310)
[Tue Sep 27 14:09:36 2011] XMMSAS bgd. selection expression = annulus(14341.168400, 26056.692600, 288.315480, 576.630961, X, Y)
[Tue Sep 27 14:09:36 2011] Writing fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src6.gif
[Tue Sep 27 14:10:37 2011] Mean detx,y = (-4642.40, -12469.70) 
[Tue Sep 27 14:10:38 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 14:10:42 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 14:10:42 2011] Setting source spectrum file to fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Sep 27 14:10:42 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Sep 27 14:12:52 2011] Not generating rmf since there are only 9 counts
[Tue Sep 27 14:12:52 2011] rmf not generated due to insufficient counts
[Tue Sep 27 14:16:46 2011] Updating aperture counts using extracted products
[Tue Sep 27 14:16:46 2011] Error reading totcts from fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Sep 27 14:16:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 14:16:46 2011] Using photon index=1.80, rate=0.00187, arf fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src6.arf
[Tue Sep 27 14:16:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 14:16:46 2011] Updating source flux to 7.6e-14
[Tue Sep 27 14:16:47 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 14:16:48 2011] xmm0061940301/analysis//spectral/fullrun_mos1_xmm0061940301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete