[Wed Aug 15 10:23:52 2012] Detection parameters:
  Position = (238.0, 367.0) = 21 38 23.90 -42 30 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.6 +/- 17.5
  Background counts = 31.1
  Rate = 0.03 +/- 0.003

[Wed Aug 15 10:23:52 2012] Off-axis axis estimate = 6.62'
[Wed Aug 15 10:26:10 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:26:10 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Wed Aug 15 10:26:10 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.200
[Wed Aug 15 10:26:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.74"
[Wed Aug 15 10:31:13 2012] fullrun_pn_xmm0061940201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 15 10:31:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 10:31:13 2012] fullrun_pn_xmm0061940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 15 10:31:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 10:31:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0061940201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0061940201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:31:13 2012] fullrun_pn_xmm0061940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 15 10:31:13 2012] fullrun_pn_xmm0061940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 15 10:31:13 2012] Fit fullrun_pn_xmm0061940201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 15 10:58:11 2012] Spatial fit model total counts = 116.097000, observed total counts = 117.000000
[Wed Aug 15 10:58:11 2012] Offset between fit and detection position for source 1 = 0.609526 pixels
[Wed Aug 15 10:58:11 2012] 114.338700 total counts/ 74.651200 bgd. counts: snr = 4.593411
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.609526 pixels
  Position = (238.6, 367.2) = 21 38 23.68 -42 30 17.5
  Extent = 7.3 (4.5-11.4)", rotation angle = 0
  Source counts = 39.7 +/- 10.7
  Background counts = 74.7
  Rate = 0.07 +/- 0.02
[Wed Aug 15 10:58:11 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 10:58:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 10:58:11 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 10:58:11 2012] Source does appear to be extended
[Wed Aug 15 10:58:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 10:58:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:58:19 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Aug 15 10:58:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Wed Aug 15 10:58:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.25"
[Wed Aug 15 11:04:32 2012] fullrun_pn_xmm0061940201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 15 11:04:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 11:04:32 2012] fullrun_pn_xmm0061940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 15 11:04:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 11:04:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0061940201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0061940201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 11:04:33 2012] fullrun_pn_xmm0061940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 15 11:04:33 2012] fullrun_pn_xmm0061940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 15 11:04:33 2012] Fit fullrun_pn_xmm0061940201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 15 11:29:31 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Wed Aug 15 11:29:31 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 11:29:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 11:29:31 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 11:29:31 2012] Source does appear to be extended
[Wed Aug 15 11:29:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 11:29:45 2012] XMMSAS src. selection expression = ellipse(20712.081800, 31895.311400, 435.294013, 435.294013, 0.000000, X, Y)
[Wed Aug 15 11:29:45 2012] Writing source region out to fullrun_pn_xmm0061940201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 15 11:29:45 2012] Extracting stamp from image fullrun_pn_xmm0061940201_pi300-10000_cl_sm2.00.img.gz, (214, 342) - (264, 392)
[Wed Aug 15 11:29:45 2012] XMMSAS bgd. selection expression = annulus(20712.081800, 31895.311400, 725.490021, 1450.980042, X, Y)
[Wed Aug 15 11:29:45 2012] Writing fullrun_pn_xmm0061940201_pi300-10000_pass1_cl_src1.gif
[Wed Aug 15 11:29:51 2012] Mean detx,y = (5940.14, 5197.88) 
[Wed Aug 15 11:29:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 11:30:08 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 11:30:08 2012] Setting source spectrum file to fullrun_pn_xmm0061940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 11:30:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0061940201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 15 11:31:38 2012] Not generating rmf since there are only 39 counts
[Wed Aug 15 11:31:38 2012] rmf not generated due to insufficient counts
[Wed Aug 15 11:42:21 2012] Updating aperture counts using extracted products
[Wed Aug 15 11:42:21 2012] Error reading totcts from fullrun_pn_xmm0061940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 11:42:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 11:42:21 2012] Using photon index=1.80, rate=0.0746, arf fullrun_pn_xmm0061940201_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 11:42:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 11:42:21 2012] Updating source flux to 2.8e-13
[Wed Aug 15 11:42:26 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 15 11:42:27 2012] xmm0061940201/analysis//spectral/fullrun_pn_xmm0061940201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete