[Thu Jul 12 10:09:09 2012] Detection parameters:
  Position = (381.3, 268.4) = 13 31 26.88 11 16 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.8 +/- 9.2
  Background counts = 4.2
  Rate = 0.02 +/- 0.004

[Thu Jul 12 10:09:09 2012] Off-axis axis estimate = 6.39'
[Thu Jul 12 10:10:28 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 10:10:28 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Thu Jul 12 10:10:28 2012] source mask rpix=2.2, npix_max = 29, mask sum = 16, frac = 0.544
[Thu Jul 12 10:10:28 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.62"
[Thu Jul 12 10:51:25 2012] fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_src17.ximg exists
[Thu Jul 12 10:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_src17.csv
[Thu Jul 12 10:51:25 2012] fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Jul 12 10:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_src17.csv
[Thu Jul 12 10:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 10:51:25 2012] fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Jul 12 10:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Jul 12 10:51:25 2012] fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Jul 12 10:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Jul 12 10:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0061940101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 11:41:26 2012] Spatial fit model total counts = 111.845000, observed total counts = 96.000000
[Thu Jul 12 11:41:26 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 12 11:41:26 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 11:41:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 11:41:26 2012] Assessing source extent using major
[Thu Jul 12 11:41:26 2012] Source does appear to be extended
[Thu Jul 12 11:41:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 11:41:38 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 11:41:38 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Thu Jul 12 11:41:38 2012] source mask rpix=2.2, npix_max = 29, mask sum = 16, frac = 0.544
[Thu Jul 12 11:41:38 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.62"
[Thu Jul 12 12:14:13 2012] fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jul 12 12:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_src16.csv
[Thu Jul 12 12:14:13 2012] fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jul 12 12:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_src16.csv
[Thu Jul 12 12:14:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 12:14:13 2012] fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jul 12 12:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jul 12 12:14:13 2012] fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jul 12 12:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jul 12 12:14:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0061940101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 12:51:39 2012] Spatial fit model total counts = 111.774000, observed total counts = 96.000000
[Thu Jul 12 12:51:39 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 12 12:51:39 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 12:51:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 12:51:39 2012] Assessing source extent using major
[Thu Jul 12 12:51:39 2012] Source does appear to be extended
[Thu Jul 12 12:51:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 12:51:50 2012] XMMSAS src. selection expression = ellipse(33126.619415, 23300.244476, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 12:51:50 2012] Writing source region out to fullrun_pn_xmm0061940101_pi300-10000_pass1_cl_src18_src.reg
[Thu Jul 12 12:51:50 2012] Extracting stamp from image fullrun_pn_xmm0061940101_pi300-10000_cl_sm2.00.img.gz, (344, 231) - (419, 306)
[Thu Jul 12 12:51:50 2012] XMMSAS bgd. selection expression = annulus(33126.619415, 23300.244476, 1087.500000, 2175.000000, X, Y)
[Thu Jul 12 12:51:50 2012] Writing fullrun_pn_xmm0061940101_pi300-10000_pass1_cl_src18.gif
[Thu Jul 12 12:59:56 2012] Mean detx,y = (-6401.39, -4027.52) 
[Thu Jul 12 12:59:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 13:00:21 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 13:00:21 2012] Setting source spectrum file to fullrun_pn_xmm0061940101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jul 12 13:00:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0061940101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Jul 12 13:13:48 2012] Not generating rmf since there are only 56 counts
[Thu Jul 12 13:13:48 2012] rmf not generated due to insufficient counts
[Thu Jul 12 13:29:32 2012] Updating aperture counts using extracted products
[Thu Jul 12 13:29:32 2012] Error reading totcts from fullrun_pn_xmm0061940101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jul 12 13:29:32 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 13:29:32 2012] Using photon index=1.80, rate=0.0243, arf fullrun_pn_xmm0061940101_pi300-10000_pass1_cl_src18.arf
[Thu Jul 12 13:29:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 13:29:32 2012] Updating source flux to 1.1e-13
[Thu Jul 12 13:29:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting