[Sat Jul 21 10:21:06 2012] Detection parameters:
  Position = (219.2, 173.2) = 11 45 4.97 19 36 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3542.6 +/- 70.4
  Background counts = 33.4
  Rate = 0.1 +/- 0.002

[Sat Jul 21 10:21:06 2012] Off-axis axis estimate = 10.75'
[Sat Jul 21 12:29:57 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 12:29:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 12:29:57 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Sat Jul 21 12:29:57 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Sat Jul 21 12:29:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.80"
[Sat Jul 21 13:20:40 2012] fullrun_mos2_xmm0061740101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 13:20:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061740101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 13:20:40 2012] fullrun_mos2_xmm0061740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 13:20:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061740101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 13:20:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061740101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061740101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 13:20:40 2012] fullrun_mos2_xmm0061740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 13:20:40 2012] fullrun_mos2_xmm0061740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 13:20:40 2012] Fit fullrun_mos2_xmm0061740101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 13:20:56 2012] Spatial fit model total counts = 4124.790000, observed total counts = 3776.000000
[Sat Jul 21 13:20:56 2012] Offset between fit and detection position for source 12 = 0.179212 pixels
[Sat Jul 21 13:20:56 2012] 4118.120000 total counts/ 1477.210000 bgd. counts: snr = 68.711983
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.179212 pixels
  Position = (219.3, 173.3) = 11 45 4.95 19 36 25.8
  Extent = 6.4 (6.1-6.6)", rotation angle = 0
  Source counts = 2640.9 +/- 64.2
  Background counts = 1477.2
  Rate = 0.08 +/- 0.002
[Sat Jul 21 13:20:56 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 13:20:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 13:20:56 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 13:20:56 2012] Source does appear to be extended
[Sat Jul 21 13:20:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 15:08:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 15:08:24 2012] Initial guess for spatial extent in simple fitting = 6.39"
[Sat Jul 21 15:08:24 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.031
[Sat Jul 21 15:08:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.39"
[Sat Jul 21 15:40:39 2012] fullrun_mos2_xmm0061740101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 21 15:40:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061740101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 15:40:39 2012] fullrun_mos2_xmm0061740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 21 15:40:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061740101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 15:40:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 15:40:39 2012] fullrun_mos2_xmm0061740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 21 15:40:39 2012] fullrun_mos2_xmm0061740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 21 15:40:39 2012] Fit fullrun_mos2_xmm0061740101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 21 15:40:53 2012] Spatial fit model total counts = 3613.640000, observed total counts = 3460.000000
[Sat Jul 21 15:40:53 2012] Offset between fit and detection position for source 12 = 0.028501 pixels
[Sat Jul 21 15:40:53 2012] 3625.530000 total counts/ 1134.080000 bgd. counts: snr = 73.982726
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.028501 pixels
  Position = (219.2, 173.3) = 11 45 4.95 19 36 25.8
  Extent = 5.9 (5.7-6.2)", rotation angle = 0
  Source counts = 2491.4 +/- 60.2
  Background counts = 1134.1
  Rate = 0.08 +/- 0.002
[Sat Jul 21 15:40:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 15:40:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 15:40:53 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 15:40:53 2012] Source does appear to be extended
[Sat Jul 21 15:40:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 17:03:50 2012] Counts = 2491.450000, rescaling region sizes by 2.000000
[Sat Jul 21 17:03:50 2012] XMMSAS src. selection expression = ellipse(19024.959400, 15029.006800, 710.718020, 710.718020, 0.000000, X, Y)
[Sat Jul 21 17:03:50 2012] Writing source region out to fullrun_mos2_xmm0061740101_pi300-10000_pass1_cl_src12_src.reg
[Sat Jul 21 17:03:50 2012] Extracting stamp from image fullrun_mos2_xmm0061740101_pi300-10000_cl_sm2.00.img.gz, (178, 132) - (260, 214)
[Sat Jul 21 17:03:50 2012] XMMSAS bgd. selection expression = annulus(19024.959400, 15029.006800, 2369.060068, 4738.120136, X, Y) && !ellipse(22574.516113, 19651.186813, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 17:03:50 2012] Writing fullrun_mos2_xmm0061740101_pi300-10000_pass1_cl_src12.gif
[Sat Jul 21 17:03:56 2012] Mean detx,y = (12534.41, -7693.50) 
[Sat Jul 21 17:03:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 17:04:42 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 17:04:42 2012] Setting source spectrum file to fullrun_mos2_xmm0061740101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jul 21 17:04:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0061740101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jul 21 17:40:09 2012] Updating aperture counts using extracted products
[Sat Jul 21 17:40:09 2012] Error reading totcts from fullrun_mos2_xmm0061740101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jul 21 17:40:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 17:40:10 2012] Using photon index=1.80, rate=0.0767, arf fullrun_mos2_xmm0061740101_pi300-10000_pass1_cl_src12.arf
[Sat Jul 21 17:40:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 17:40:10 2012] Updating source flux to 2.1e-12
[Sat Jul 21 17:41:24 2012] Reading fit data from xmm0061740101/analysis//spectral/fullrun_mos2_xmm0061740101_pi300-10000_pass1_cl_src12_pl.csv
[Sat Jul 21 17:41:24 2012] Spectral fit parameter nH value = 6.22142e+20
[Sat Jul 21 17:41:24 2012] Spectral fit parameter PhoIndex value = 2.60737
[Sat Jul 21 17:41:24 2012] Failed to get F(0.3-8.0) from xmm0061740101/analysis//spectral/fullrun_mos2_xmm0061740101_pi300-10000_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 17:41:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 17:41:24 2012] Using Nh = 6.2e+20, photon index=2.61, rate=0.0767, arf fullrun_mos2_xmm0061740101_pi300-10000_pass1_cl_src12.arf
[Sat Jul 21 17:41:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 17:41:24 2012] Updating source flux to 1.6e-12