[Sat Jul 21 10:20:36 2012] Detection parameters:
  Position = (311.7, 409.1) = 11 44 36.47 19 53 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.0 +/- 14.1
  Background counts = 45.5
  Rate = 0.005 +/- 0.0007

[Sat Jul 21 10:20:36 2012] Off-axis axis estimate = 8.08'
[Sat Jul 21 11:42:55 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 11:42:55 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Sat Jul 21 11:42:55 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.888
[Sat Jul 21 11:42:55 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.47"
[Sat Jul 21 12:29:57 2012] fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jul 21 12:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_src11.csv
[Sat Jul 21 12:29:57 2012] fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jul 21 12:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_src11.csv
[Sat Jul 21 12:29:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 12:29:57 2012] fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jul 21 12:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jul 21 12:29:57 2012] fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jul 21 12:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jul 21 12:29:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061740101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 13:20:52 2012] Spatial fit model total counts = 554.649000, observed total counts = 459.000000
[Sat Jul 21 13:20:52 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 13:20:52 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 13:20:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 13:20:52 2012] Assessing source extent using major
[Sat Jul 21 13:20:52 2012] Source does appear to be extended
[Sat Jul 21 13:20:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 14:31:07 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 14:31:07 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Sat Jul 21 14:31:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.888
[Sat Jul 21 14:31:07 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.47"
[Sat Jul 21 15:08:23 2012] fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jul 21 15:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_src11.csv
[Sat Jul 21 15:08:23 2012] fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jul 21 15:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_src11.csv
[Sat Jul 21 15:08:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 15:08:23 2012] fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jul 21 15:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jul 21 15:08:23 2012] fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jul 21 15:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jul 21 15:08:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061740101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 15:40:49 2012] Spatial fit model total counts = 554.642000, observed total counts = 459.000000
[Sat Jul 21 15:40:49 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 15:40:49 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 15:40:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 15:40:49 2012] Assessing source extent using major
[Sat Jul 21 15:40:49 2012] Source does appear to be extended
[Sat Jul 21 15:40:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 16:33:31 2012] XMMSAS src. selection expression = ellipse(27072.467621, 35542.666870, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 16:33:31 2012] Writing source region out to fullrun_mos1_xmm0061740101_pi300-10000_pass1_cl_src17_src.reg
[Sat Jul 21 16:33:31 2012] Extracting stamp from image fullrun_mos1_xmm0061740101_pi300-10000_cl_sm2.00.img.gz, (274, 372) - (349, 447)
[Sat Jul 21 16:33:31 2012] XMMSAS bgd. selection expression = annulus(27072.467621, 35542.666870, 1087.500000, 2175.000000, X, Y)
[Sat Jul 21 16:33:31 2012] Writing fullrun_mos1_xmm0061740101_pi300-10000_pass1_cl_src17.gif
[Sat Jul 21 16:37:19 2012] Mean detx,y = (6356.63, 4419.75) 
[Sat Jul 21 16:37:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 16:37:57 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 16:37:57 2012] Setting source spectrum file to fullrun_mos1_xmm0061740101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jul 21 16:37:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0061740101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jul 21 17:01:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 21 17:01:51 2012] rmf not generated due to insufficient counts
[Sat Jul 21 17:40:07 2012] Updating aperture counts using extracted products
[Sat Jul 21 17:40:07 2012] Error reading totcts from fullrun_mos1_xmm0061740101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jul 21 17:40:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 17:40:08 2012] Using photon index=1.80, rate=0.00486, arf fullrun_mos1_xmm0061740101_pi300-10000_pass1_cl_src17.arf
[Sat Jul 21 17:40:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 17:40:08 2012] Updating source flux to 8.8e-14
[Sat Jul 21 17:40:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting