[Mon Dec 26 22:48:27 2011] Detection parameters:
  Position = (321.7, 314.0) = 9 20 21.52 -55 12 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3935.4 +/- 89.3
  Background counts = 92.0
  Rate = 0.1 +/- 0.002

[Mon Dec 26 22:48:29 2011] Off-axis axis estimate = 2.03'
[Mon Dec 26 23:35:27 2011] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 23:35:27 2011] Initial guess for spatial extent in simple fitting = 7.44"
[Mon Dec 26 23:35:27 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Mon Dec 26 23:35:27 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.44"
[Tue Dec 27 18:55:35 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Dec 27 18:55:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src3.csv
[Tue Dec 27 18:55:35 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Dec 27 18:55:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src3.csv
[Tue Dec 27 18:55:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Dec 27 18:55:36 2011] Fit fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Dec 27 18:55:56 2011] Warning, spatial fit 3 centroid is now closest to src. 6
[Tue Dec 27 18:55:56 2011] Source 4 is offset by 7.644915 and -0.766137 pixels which is larger than
2 X fitted extent = 2.148552 x 6.925288, not incorporating fit results
[Tue Dec 27 18:55:56 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 18:55:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 18:55:56 2011] Assessing source extent using major
[Tue Dec 27 18:55:56 2011] Source does appear to be extended
[Tue Dec 27 18:55:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 18:55:56 2011] Source is confused with source 1
[Tue Dec 27 18:55:56 2011] Source is confused with source 6
[Tue Dec 27 18:55:56 2011] Source is confused with source 5
[Tue Dec 27 19:34:15 2011] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 19:34:15 2011] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Dec 27 19:34:15 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Tue Dec 27 19:34:15 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.44"
[Wed Dec 28 05:09:53 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Dec 28 05:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src3.csv
[Wed Dec 28 05:09:53 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Dec 28 05:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src3.csv
[Wed Dec 28 05:09:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:09:53 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Dec 28 05:09:53 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Dec 28 05:09:53 2011] Fit fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Dec 28 05:10:13 2011] Warning, spatial fit 3 centroid is now closest to src. 5
[Wed Dec 28 05:10:13 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:10:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:10:13 2011] Assessing source extent using major
[Wed Dec 28 05:10:13 2011] Source does appear to be extended
[Wed Dec 28 05:10:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 05:25:28 2011] Counts = 3935.390137, rescaling region sizes by 2.000000
[Wed Dec 28 05:25:28 2011] XMMSAS src. selection expression = ellipse(27941.105591, 27273.594055, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Dec 28 05:25:28 2011] Writing source region out to fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src4_src.reg
[Wed Dec 28 05:25:28 2011] Extracting stamp from image fullrun_mos2_xmm0061140101_pi300-10000_cl_sm2.00.img.gz, (247, 239) - (397, 389)
[Wed Dec 28 05:25:28 2011] XMMSAS bgd. selection expression = annulus(27941.105591, 27273.594055, 4350.000000, 8700.000000, X, Y) && !ellipse(26979.899080, 27454.814600, 2722.992078, 2722.992078, 0.000000, X, Y) && !ellipse(26943.438507, 26440.209564, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(27869.045441, 27700.859955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28054.404000, 26757.008000, 488.140014, 488.140014, 0.000000, X, Y) && !ellipse(27870.303925, 28134.532440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.420000, 25590.988000, 1163.248033, 1163.248033, 0.000000, X, Y) && !ellipse(28443.690000, 26414.294000, 1178.368034, 1178.368034, 0.000000, X, Y) && !ellipse(27856.524323, 28959.274811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28845.132736, 31375.927505, 401.538818, 310.861584, 22.006906, X, Y) && !ellipse(24226.562958, 33028.314301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.997345, 28670.476654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22809.239000, 30661.004400, 428.275812, 428.275812, 0.000000, X, Y) && !ellipse(26849.415955, 31800.618134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27229.548600, 22066.381800, 1126.880032, 1126.880032, 0.000000, X, Y) && !ellipse(26772.417209, 33317.149181, 1781.192051, 460.376759, 87.131162, X, Y) && !ellipse(27175.520800, 22697.712000, 1249.648036, 867.800025, 83.222810, X, Y) && !ellipse(26845.380860, 31253.422000, 1332.720038, 354.522410, 87.603760, X, Y) && !ellipse(27212.607497, 21770.750208, 1332.720038, 478.198884, 88.103856, X, Y) && !ellipse(25001.550000, 24815.398000, 1080.208031, 1080.208031, 0.000000, X, Y)
[Wed Dec 28 05:25:28 2011] Writing fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src4.gif
[Wed Dec 28 06:17:01 2011] Mean detx,y = (-63.71, -170.70) 
[Wed Dec 28 06:17:09 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 06:25:12 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 06:25:12 2011] Setting source spectrum file to fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Dec 28 06:25:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Dec 28 07:52:05 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 07:52:05 2011] rmf not generated due to insufficient counts
[Wed Dec 28 11:37:38 2011] Updating aperture counts using extracted products
[Wed Dec 28 11:37:38 2011] Error reading totcts from fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Dec 28 11:37:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 11:37:42 2011] Using photon index=1.80, rate=0.106, arf fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src4.arf
[Wed Dec 28 11:37:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 11:37:42 2011] Updating source flux to 9.5e-13
[Wed Dec 28 11:37:46 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting