[Mon Dec 26 22:48:29 2011] Detection parameters: Position = (312.4, 263.0) = 9 20 26.24 -55 16 15.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 160.5 +/- 20.4 Background counts = 70.3 Rate = 0.004 +/- 0.0006 [Mon Dec 26 22:48:29 2011] Off-axis axis estimate = 2.76' [Mon Dec 26 23:35:27 2011] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting [Mon Dec 26 23:35:27 2011] Initial guess for spatial extent in simple fitting = 7.81" [Mon Dec 26 23:35:27 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.949 [Mon Dec 26 23:35:27 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 7.81" [Tue Dec 27 18:55:35 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src20.ximg exists [Tue Dec 27 18:55:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src20.csv [Tue Dec 27 18:55:35 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src20_1.ximg exists [Tue Dec 27 18:55:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src20.csv [Tue Dec 27 18:55:35 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src20_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Tue Dec 27 18:55:36 2011] Fit fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly [Tue Dec 27 18:55:56 2011] Warning, spatial fit 20 centroid is now closest to src. 32 [Tue Dec 27 18:55:56 2011] Source 33 is offset by -9.616359 and 0.024959 pixels which is larger than 2 X fitted extent = 7.044368 x 7.044368, not incorporating fit results [Tue Dec 27 18:55:56 2011] Vigneting correction estimate = 1.000000 [Tue Dec 27 18:55:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Dec 27 18:55:56 2011] Assessing source extent using major [Tue Dec 27 18:55:56 2011] Source does appear to be extended [Tue Dec 27 18:55:56 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Dec 27 18:55:56 2011] Source is confused with source 34 [Tue Dec 27 19:34:15 2011] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting [Tue Dec 27 19:34:15 2011] Initial guess for spatial extent in simple fitting = 7.81" [Tue Dec 27 19:34:15 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.949 [Tue Dec 27 19:34:15 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 7.81" [Wed Dec 28 05:09:53 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src20.ximg exists [Wed Dec 28 05:09:53 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src20_1.ximg exists [Wed Dec 28 05:09:53 2011] Fit fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src20 appears to have run properly [Wed Dec 28 05:09:54 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists [Wed Dec 28 05:09:54 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists [Wed Dec 28 05:09:54 2011] Fit fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly [Wed Dec 28 05:10:13 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 24.582361 pixels away [Wed Dec 28 05:10:13 2011] Spatial fit model total counts = 1203.300000, observed total counts = 1208.000000 [Wed Dec 28 05:10:13 2011] Offset between fit and detection position for source 33 = 1.606974 pixels [Wed Dec 28 05:10:13 2011] 1093.308000 total counts/ 808.792000 bgd. counts: snr = 10.004336 Spatial fit parameters: Offset between fit and detection position for source 33 = 1.606974 pixels Position = (312.9, 261.5) = 9 20 25.99 -55 16 22.7 Extent = 15.6 (15.6-31.2)" x 10.8 (7.1-14.4)", rotation angle = 83 (51-104) degrees Source counts = 284.5 +/- 33.1 Background counts = 808.8 Rate = 0.007 +/- 0.0009 [Wed Dec 28 05:10:13 2011] Vigneting correction estimate = 1.000000 [Wed Dec 28 05:10:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Dec 28 05:10:13 2011] Assessing source extent using major axis lower bound [Wed Dec 28 05:10:13 2011] Source does appear to be extended [Wed Dec 28 05:10:13 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08 [Wed Dec 28 05:25:29 2011] XMMSAS src. selection expression = ellipse(27175.520800, 22697.712000, 937.236027, 650.850019, 83.222810, X, Y) [Wed Dec 28 05:25:29 2011] Writing source region out to fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src33_src.reg [Wed Dec 28 05:25:29 2011] Extracting stamp from image fullrun_mos2_xmm0061140101_pi300-10000_cl_sm2.00.img.gz, (259, 208) - (367, 315) [Wed Dec 28 05:25:29 2011] XMMSAS bgd. selection expression = annulus(27175.520800, 22697.712000, 1562.060045, 3124.120090, X, Y) && !ellipse(26979.899080, 27454.814600, 2722.992078, 2722.992078, 0.000000, X, Y) && !ellipse(26943.438507, 26440.209564, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(28427.420000, 25590.988000, 1163.248033, 1163.248033, 0.000000, X, Y) && !ellipse(28443.690000, 26414.294000, 1178.368034, 1178.368034, 0.000000, X, Y) && !ellipse(27229.548600, 22066.381800, 1126.880032, 1126.880032, 0.000000, X, Y) && !ellipse(27212.607497, 21770.750208, 1332.720038, 478.198884, 88.103856, X, Y) && !ellipse(25001.550000, 24815.398000, 1080.208031, 1080.208031, 0.000000, X, Y) [Wed Dec 28 05:25:29 2011] Writing fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src33.gif [Wed Dec 28 07:30:47 2011] Mean detx,y = (71.36, -4874.16) [Wed Dec 28 07:30:50 2011] Setting backscal keywords in source and bgd. spectrum [Wed Dec 28 07:32:31 2011] Binned source spectrum to 10 counts/bin [Wed Dec 28 07:32:31 2011] Setting source spectrum file to fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Wed Dec 28 07:32:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src33_bgd.pi.gz [Wed Dec 28 11:37:40 2011] Updating aperture counts using extracted products [Wed Dec 28 11:37:41 2011] Error reading totcts from fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Wed Dec 28 11:37:44 2011] Calculating source flux in energy range 0.30-8.00 [Wed Dec 28 11:37:44 2011] Using photon index=1.80, rate=0.00738, arf fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src33.arf [Wed Dec 28 11:37:44 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Dec 28 11:37:44 2011] Updating source flux to 8.4e-14 [Wed Dec 28 11:37:46 2011] Flag b found in src. 33 procflags, skipping spectral fitting [Wed Dec 28 11:37:46 2011] Flag c found in src. 33 procflags, skipping spectral fitting