[Mon Dec 26 22:48:29 2011] Detection parameters:
  Position = (315.4, 269.0) = 9 20 24.75 -55 15 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.4 +/- 17.4
  Background counts = 77.5
  Rate = 0.003 +/- 0.0005

[Mon Dec 26 22:48:29 2011] Off-axis axis estimate = 2.46'
[Mon Dec 26 23:35:27 2011] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 23:35:27 2011] Initial guess for spatial extent in simple fitting = 7.66"
[Mon Dec 26 23:35:27 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.978
[Mon Dec 26 23:35:27 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 7.66"
[Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src30.ximg exists
[Tue Dec 27 18:55:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src30.csv
[Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Dec 27 18:55:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src30.csv
[Tue Dec 27 18:55:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 18:55:37 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Dec 27 18:55:37 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Dec 27 18:55:37 2011] Fit fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Dec 27 18:55:56 2011] Spatial fit model total counts = 1208.040000, observed total counts = 1208.000000
[Tue Dec 27 18:55:56 2011] Offset between fit and detection position for source 32 = 4.422514 pixels
[Tue Dec 27 18:55:56 2011] Warning, changing simple spatial fit ID from 30 to 20
[Tue Dec 27 18:55:56 2011] 1167.390023 total counts/ 1167.390000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 4.422514 pixels
  Position = (319.2, 271.2) = 9 20 22.80 -55 15 40.3
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 0.0 +/- 34.2
  Background counts = 1167.4
  Rate = 6e-10 +/- 0.0009
  Deleting source due to low Poisson probability