[Mon Dec 26 22:48:29 2011] Detection parameters:
  Position = (470.2, 294.1) = 9 19 5.99 -55 13 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.2 +/- 12.1
  Background counts = 21.5
  Rate = 0.001 +/- 0.0003

[Mon Dec 26 22:48:29 2011] Off-axis axis estimate = 12.46'
[Mon Dec 26 23:35:27 2011] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 23:35:27 2011] Initial guess for spatial extent in simple fitting = 12.66"
[Mon Dec 26 23:35:27 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.054
[Mon Dec 26 23:35:27 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 12.66"
[Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src37.ximg exists
[Tue Dec 27 18:55:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src37.csv
[Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue Dec 27 18:55:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src37.csv
[Tue Dec 27 18:55:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 18:55:37 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue Dec 27 18:55:37 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue Dec 27 18:55:37 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue Dec 27 18:55:37 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue Dec 27 18:55:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 18:55:56 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 17.248753 pixels away
[Tue Dec 27 18:55:56 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 18:55:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 18:55:56 2011] Assessing source extent using major
[Tue Dec 27 18:55:56 2011] Source does appear to be extended
[Tue Dec 27 18:55:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 18:55:56 2011] Deleting source due to low Poisson probability 0.8