[Mon Dec 26 22:48:28 2011] Detection parameters:
  Position = (308.5, 380.0) = 9 20 28.24 -55 7 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.2 +/- 17.1
  Background counts = 41.6
  Rate = 0.005 +/- 0.0006

[Mon Dec 26 22:48:29 2011] Off-axis axis estimate = 5.96'
[Mon Dec 26 23:35:27 2011] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 23:35:27 2011] Initial guess for spatial extent in simple fitting = 9.41"
[Mon Dec 26 23:35:27 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.058
[Mon Dec 26 23:35:27 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 9.41"
[Tue Dec 27 18:55:35 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src19.ximg exists
[Tue Dec 27 18:55:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src19.csv
[Tue Dec 27 18:55:35 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Dec 27 18:55:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src19.csv
[Tue Dec 27 18:55:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Dec 27 18:55:36 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Dec 27 18:55:36 2011] Fit fullrun_mos2_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Dec 27 18:55:56 2011] Source 25 is offset by -8.677576 and 4.853186 pixels which is larger than
2 X fitted extent = 8.194391 x 8.194391, not incorporating fit results
[Tue Dec 27 18:55:56 2011] Warning, spatial fit 19 centroid is now closest to src. 13
[Tue Dec 27 18:55:56 2011] Spatial fit model total counts = 531.543000, observed total counts = 519.000000
[Tue Dec 27 18:55:56 2011] Offset between fit and detection position for source 25 = 3.473283 pixels
[Tue Dec 27 18:55:56 2011] Warning, changing simple spatial fit ID from 19 to 21
[Tue Dec 27 18:55:56 2011] 518.464000 total counts/ 280.590000 bgd. counts: snr = 14.200737
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.473283 pixels
  Position = (308.3, 383.5) = 9 20 28.36 -55 7 31.7
  Extent = 22.3" x 5.8", rotation angle = 87
  Source counts = 237.9 +/- 22.8
  Background counts = 280.6
  Rate = 0.006 +/- 0.0006
[Tue Dec 27 18:55:56 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 18:55:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 18:55:56 2011] Assessing source extent using major
[Tue Dec 27 18:55:56 2011] Source does appear to be extended
[Tue Dec 27 18:55:56 2011] Computing asymmetry using major and minor axis, asym = 3.87
[Tue Dec 27 18:55:56 2011] Source is asymmetric
[Tue Dec 27 18:55:56 2011] Source is confused with source 24
[Tue Dec 27 19:34:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 19:34:15 2011] Initial guess for spatial extent in simple fitting = 14.01"
[Tue Dec 27 19:34:15 2011] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.885
[Tue Dec 27 19:34:15 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 14.01"
[Wed Dec 28 05:09:53 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Dec 28 05:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src19.csv
[Wed Dec 28 05:09:53 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Dec 28 05:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src19.csv
[Wed Dec 28 05:09:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:09:54 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Dec 28 05:09:54 2011] fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Dec 28 05:09:54 2011] Fit fullrun_mos2_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Dec 28 05:10:13 2011] Warning, spatial fit 19 centroid is now closest to src. 24
[Wed Dec 28 05:10:13 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:10:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:10:13 2011] Assessing source extent using major
[Wed Dec 28 05:10:13 2011] Source does appear to be extended
[Wed Dec 28 05:10:13 2011] Computing asymmetry using major and minor axis, asym = 3.87
[Wed Dec 28 05:10:13 2011] Source is asymmetric
[Wed Dec 28 05:25:29 2011] XMMSAS src. selection expression = ellipse(26772.417209, 33317.149181, 1335.894038, 345.282569, 87.131162, X, Y)
[Wed Dec 28 05:25:29 2011] Writing source region out to fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src25_src.reg
[Wed Dec 28 05:25:29 2011] Extracting stamp from image fullrun_mos2_xmm0061140101_pi300-10000_cl_sm2.00.img.gz, (232, 307) - (385, 460)
[Wed Dec 28 05:25:29 2011] XMMSAS bgd. selection expression = annulus(26772.417209, 33317.149181, 2226.490064, 4452.980128, X, Y) && !ellipse(26979.899080, 27454.814600, 2722.992078, 2722.992078, 0.000000, X, Y) && !ellipse(26943.438507, 26440.209564, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(27870.303925, 28134.532440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.524323, 28959.274811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28845.132736, 31375.927505, 401.538818, 310.861584, 22.006906, X, Y) && !ellipse(24226.562958, 33028.314301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.997345, 28670.476654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22809.239000, 30661.004400, 428.275812, 428.275812, 0.000000, X, Y) && !ellipse(26849.415955, 31800.618134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26845.380860, 31253.422000, 1332.720038, 354.522410, 87.603760, X, Y)
[Wed Dec 28 05:25:29 2011] Writing fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src25.gif
[Wed Dec 28 07:28:18 2011] Mean detx,y = (59.17, 5509.06) 
[Wed Dec 28 07:28:22 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 07:30:28 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 07:30:29 2011] Setting source spectrum file to fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Dec 28 07:30:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Dec 28 11:37:40 2011] Updating aperture counts using extracted products
[Wed Dec 28 11:37:40 2011] Error reading totcts from fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Dec 28 11:37:43 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 11:37:43 2011] Using photon index=1.80, rate=0.00617, arf fullrun_mos2_xmm0061140101_pi300-10000_pass1_cl_src25.arf
[Wed Dec 28 11:37:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 11:37:44 2011] Updating source flux to 9.3e-14
[Wed Dec 28 11:37:46 2011] Flag b found in src. 25 procflags, skipping spectral fitting
[Wed Dec 28 11:37:46 2011] Flag c found in src. 25 procflags, skipping spectral fitting