[Mon Dec 26 22:47:17 2011] Detection parameters:
  Position = (464.3, 303.1) = 9 19 9.01 -55 13 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1791.8 +/- 52.2
  Background counts = 21.5
  Rate = 0.05 +/- 0.001

[Mon Dec 26 22:47:18 2011] Off-axis axis estimate = 12.03'
[Mon Dec 26 22:52:21 2011] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 22:52:21 2011] Initial guess for spatial extent in simple fitting = 12.44"
[Mon Dec 26 22:52:21 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.930
[Mon Dec 26 22:52:21 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.44"
[Mon Dec 26 23:35:27 2011] fullrun_mos1_xmm0061140101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Dec 26 23:35:27 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0061140101_pi300-10000_cl_pass0_src3.csv
[Mon Dec 26 23:35:27 2011] fullrun_mos1_xmm0061140101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Dec 26 23:35:27 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0061140101_pi300-10000_cl_pass0_src3.csv
[Mon Dec 26 23:35:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061140101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061140101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 23:35:27 2011] fullrun_mos1_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Dec 26 23:35:27 2011] fullrun_mos1_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Dec 26 23:35:27 2011] Fit fullrun_mos1_xmm0061140101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Dec 27 18:55:43 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.503836 pixels away
[Tue Dec 27 18:55:43 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 18:55:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 18:55:43 2011] Assessing source extent using major
[Tue Dec 27 18:55:43 2011] Source does appear to be extended
[Tue Dec 27 18:55:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 18:56:10 2011] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 18:56:10 2011] Initial guess for spatial extent in simple fitting = 12.44"
[Tue Dec 27 18:56:10 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.930
[Tue Dec 27 18:56:10 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 12.44"
[Tue Dec 27 19:34:15 2011] fullrun_mos1_xmm0061140101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Dec 27 19:34:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061140101_pi300-10000_cl_pass1_src3.csv
[Tue Dec 27 19:34:15 2011] fullrun_mos1_xmm0061140101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Dec 27 19:34:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0061140101_pi300-10000_cl_pass1_src3.csv
[Tue Dec 27 19:34:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0061140101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0061140101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 19:34:15 2011] fullrun_mos1_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Dec 27 19:34:15 2011] fullrun_mos1_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Dec 27 19:34:15 2011] Fit fullrun_mos1_xmm0061140101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Dec 28 05:10:01 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.299728 pixels away
[Wed Dec 28 05:10:01 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:10:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:10:01 2011] Assessing source extent using major
[Wed Dec 28 05:10:01 2011] Source does appear to be extended
[Wed Dec 28 05:10:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 05:10:27 2011] Counts = 1791.848633, rescaling region sizes by 2.000000
[Wed Dec 28 05:10:27 2011] XMMSAS src. selection expression = ellipse(40348.784973, 26319.689819, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Dec 28 05:10:27 2011] Writing source region out to fullrun_mos1_xmm0061140101_pi300-10000_pass1_cl_src3_src.reg
[Wed Dec 28 05:10:27 2011] Extracting stamp from image fullrun_mos1_xmm0061140101_pi300-10000_cl_sm2.00.img.gz, (389, 228) - (539, 378)
[Wed Dec 28 05:10:27 2011] XMMSAS bgd. selection expression = annulus(40348.784973, 26319.689819, 4350.000000, 8700.000000, X, Y) && !ellipse(38206.768402, 20638.617432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38585.351685, 17432.548752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42152.071000, 28926.995800, 569.757616, 569.757616, 0.000000, X, Y) && !ellipse(35888.343719, 35201.166382, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 05:10:27 2011] Writing fullrun_mos1_xmm0061140101_pi300-10000_pass1_cl_src3.gif
[Wed Dec 28 05:12:09 2011] Mean detx,y = (-1653.25, 13046.97) 
[Wed Dec 28 05:12:13 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 05:17:48 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 05:17:49 2011] Setting source spectrum file to fullrun_mos1_xmm0061140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Dec 28 05:17:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0061140101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Dec 28 05:24:08 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 05:24:08 2011] rmf not generated due to insufficient counts
[Wed Dec 28 11:37:35 2011] Updating aperture counts using extracted products
[Wed Dec 28 11:37:35 2011] Error reading totcts from fullrun_mos1_xmm0061140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Dec 28 11:37:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 11:37:36 2011] Using photon index=1.80, rate=0.0456, arf fullrun_mos1_xmm0061140101_pi300-10000_pass1_cl_src3.arf
[Wed Dec 28 11:37:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 11:37:36 2011] Updating source flux to 7.4e-13
[Wed Dec 28 11:37:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Dec 28 11:37:46 2011] xmm0061140101/analysis//spectral/fullrun_mos1_xmm0061140101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete