[Fri Nov 25 08:26:39 2011] Detection parameters:
  Position = (402.2, 143.1) = 12 56 8.69 -69 26 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 702.6 +/- 32.6
  Background counts = 7.8
  Rate = 0.04 +/- 0.002

[Fri Nov 25 08:26:40 2011] Off-axis axis estimate = 13.54'
[Fri Nov 25 08:43:02 2011] Using EEF radius (= 13.20 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 08:43:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 08:43:02 2011] Initial guess for spatial extent in simple fitting = 13.20"
[Fri Nov 25 08:43:02 2011] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.941
[Fri Nov 25 08:43:02 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 13.20"
[Fri Nov 25 11:32:49 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Nov 25 11:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src4.csv
[Fri Nov 25 11:32:49 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Nov 25 11:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src4.csv
[Fri Nov 25 11:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:32:49 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Nov 25 11:32:49 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Nov 25 11:32:49 2011] Fit fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Nov 25 11:32:59 2011] Spatial fit model total counts = 729.858000, observed total counts = 730.000000
[Fri Nov 25 11:32:59 2011] Offset between fit and detection position for source 7 = 0.514250 pixels
[Fri Nov 25 11:32:59 2011] 731.978000 total counts/ 270.652000 bgd. counts: snr = 28.041569
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.514250 pixels
  Position = (401.7, 143.1) = 12 56 9.11 -69 26 56.1
  Extent = 6.2 (5.5-6.9)", rotation angle = 0
  Source counts = 461.3 +/- 27.1
  Background counts = 270.7
  Rate = 0.03 +/- 0.002
[Fri Nov 25 11:32:59 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 11:32:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 11:32:59 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 11:32:59 2011] Source does appear to be extended
[Fri Nov 25 11:32:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 11:44:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:44:07 2011] Initial guess for spatial extent in simple fitting = 6.25"
[Fri Nov 25 11:44:07 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.066
[Fri Nov 25 11:44:07 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 6.25"
[Fri Nov 25 13:58:25 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Nov 25 13:58:25 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src4.csv
[Fri Nov 25 13:58:25 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Nov 25 13:58:25 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src4.csv
[Fri Nov 25 13:58:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 13:58:25 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Nov 25 13:58:25 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Nov 25 13:58:25 2011] Fit fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Nov 25 13:58:31 2011] Spatial fit model total counts = 684.316000, observed total counts = 684.000000
[Fri Nov 25 13:58:31 2011] Offset between fit and detection position for source 7 = 0.017634 pixels
[Fri Nov 25 13:58:31 2011] 688.403000 total counts/ 262.082000 bgd. counts: snr = 26.334079
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.017634 pixels
  Position = (401.7, 143.1) = 12 56 9.11 -69 26 56.1
  Extent = 5.6 (5.0-6.2)", rotation angle = 0
  Source counts = 426.3 +/- 26.2
  Background counts = 262.1
  Rate = 0.03 +/- 0.002
[Fri Nov 25 13:58:31 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 13:58:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 13:58:31 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 13:58:31 2011] Source does appear to be extended
[Fri Nov 25 13:58:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 14:10:25 2011] XMMSAS src. selection expression = ellipse(34895.669600, 12402.679800, 335.066410, 335.066410, 0.000000, X, Y)
[Fri Nov 25 14:10:25 2011] Writing source region out to fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src7_src.reg
[Fri Nov 25 14:10:25 2011] Extracting stamp from image fullrun_mos2_xmm0060740101_pi300-10000_cl_sm2.00.img.gz, (382, 124) - (421, 162)
[Fri Nov 25 14:10:25 2011] XMMSAS bgd. selection expression = annulus(34895.669600, 12402.679800, 558.444016, 1116.888032, X, Y) && !ellipse(32098.830000, 11629.600000, 1690.424049, 1690.424049, 0.000000, X, Y) && !ellipse(32980.397800, 9666.944000, 1957.136056, 1957.136056, 0.000000, X, Y)
[Fri Nov 25 14:10:25 2011] Writing fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src7.gif
[Fri Nov 25 14:36:36 2011] Mean detx,y = (2898.67, 14506.88) 
[Fri Nov 25 14:36:38 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 14:36:49 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 14:36:49 2011] Setting source spectrum file to fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Nov 25 14:36:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Nov 25 16:03:51 2011] Updating aperture counts using extracted products
[Fri Nov 25 16:03:51 2011] Error reading totcts from fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Nov 25 16:03:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 16:03:51 2011] Using photon index=1.80, rate=0.0254, arf fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src7.arf
[Fri Nov 25 16:03:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 16:03:51 2011] Updating source flux to 1.1e-12