[Fri Nov 25 08:26:39 2011] Detection parameters:
  Position = (294.3, 276.0) = 12 57 37.76 -69 17 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 545020.0 +/- 828.0
  Background counts = 17.6
  Rate = 3e+01 +/- 0.05

[Fri Nov 25 08:26:40 2011] Off-axis axis estimate = 1.66'
[Fri Nov 25 08:43:02 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 08:43:02 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Nov 25 08:43:02 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Fri Nov 25 08:43:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Nov 25 11:32:49 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Nov 25 11:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 11:32:49 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Nov 25 11:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 11:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:32:49 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Nov 25 11:32:49 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Nov 25 11:32:49 2011] Fit fullrun_mos2_xmm0060740101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Nov 25 11:32:59 2011] Spatial fit model total counts = 533100.000000, observed total counts = 537956.000000
[Fri Nov 25 11:32:59 2011] Offset between fit and detection position for source 1 = 0.030260 pixels
[Fri Nov 25 11:32:59 2011] 519706.000000 total counts/ 25600.000000 bgd. counts: snr = 3088.162500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.030260 pixels
  Position = (294.3, 276.0) = 12 57 37.79 -69 17 19.4
  Extent = 8.9 (8.9-8.9)", rotation angle = 0
  Source counts = 494106.0 +/- 720.9
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.04
[Fri Nov 25 11:32:59 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 11:32:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 11:32:59 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 11:32:59 2011] Source does appear to be extended
[Fri Nov 25 11:32:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 11:44:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:44:07 2011] Initial guess for spatial extent in simple fitting = 8.90"
[Fri Nov 25 11:44:07 2011] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.158
[Fri Nov 25 11:44:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.90"
[Fri Nov 25 13:58:25 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 13:58:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 13:58:25 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 13:58:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 13:58:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 13:58:25 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 13:58:25 2011] fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 13:58:25 2011] Fit fullrun_mos2_xmm0060740101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 13:58:31 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Nov 25 13:58:31 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 13:58:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 13:58:31 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 13:58:31 2011] Source does appear to be extended
[Fri Nov 25 13:58:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 13:58:31 2011] Source is confused with source 11
[Fri Nov 25 14:10:25 2011] Counts = 494106.000000, rescaling region sizes by 3.000000
[Fri Nov 25 14:10:25 2011] XMMSAS src. selection expression = ellipse(25553.735000, 23962.464800, 1601.229646, 1601.229646, 0.000000, X, Y)
[Fri Nov 25 14:10:25 2011] Writing source region out to fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 14:10:25 2011] Extracting stamp from image fullrun_mos2_xmm0060740101_pi300-10000_cl_sm2.00.img.gz, (202, 184) - (386, 368)
[Fri Nov 25 14:10:25 2011] XMMSAS bgd. selection expression = annulus(25553.735000, 23962.464800, 8006.148230, 16012.296461, X, Y) && !ellipse(25162.854000, 24014.285000, 3542.136102, 3542.136102, 0.000000, X, Y) && !ellipse(24714.121918, 23683.272278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34895.669600, 12402.679800, 446.755213, 446.755213, 0.000000, X, Y) && !ellipse(16500.255000, 18705.369400, 367.273611, 367.273611, 0.000000, X, Y) && !ellipse(32098.830000, 11629.600000, 1690.424049, 1690.424049, 0.000000, X, Y) && !ellipse(32980.397800, 9666.944000, 1957.136056, 1957.136056, 0.000000, X, Y) && !ellipse(31197.671800, 12842.932000, 1922.576055, 1922.576055, 0.000000, X, Y)
[Fri Nov 25 14:10:25 2011] Writing fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 14:11:25 2011] Mean detx,y = (-11.43, -55.68) 
[Fri Nov 25 14:11:34 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 14:18:03 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 14:18:03 2011] Setting source spectrum file to fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 14:18:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Nov 25 16:03:51 2011] Updating aperture counts using extracted products
[Fri Nov 25 16:03:51 2011] Error reading totcts from fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 16:03:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 16:03:51 2011] Using photon index=1.80, rate=29.5, arf fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 16:03:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 16:03:51 2011] Updating source flux to 3.5e-10
[Fri Nov 25 16:04:24 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Nov 25 16:06:02 2011] Reading fit data from xmm0060740101/analysis//spectral/fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Nov 25 16:06:02 2011] Spectral fit parameter nH value = 3.1846e+21
[Fri Nov 25 16:06:02 2011] Spectral fit parameter PhoIndex value = 1.68023
[Fri Nov 25 16:06:02 2011] Failed to get F(0.3-8.0) from xmm0060740101/analysis//spectral/fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Nov 25 16:06:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 16:06:02 2011] Using Nh = 3.2e+21, photon index=1.68, rate=29.5, arf fullrun_mos2_xmm0060740101_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 16:06:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 16:06:02 2011] Updating source flux to 4.3e-10