[Sat Jun 15 12:54:48 2013] Detection parameters:
  Position = (266.6, 221.5) = 15 44 11.39 53 55 14.3
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 41.9 +/- 16.4
  Background counts = 198.0
  Rate = 0.002 +/- 0.0009

[Sat Jun 15 12:54:48 2013] Off-axis axis estimate = 6.04'
[Sat Jun 15 13:44:03 2013] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 13:44:03 2013] Initial guess for spatial extent in simple fitting = 9.45"
[Sat Jun 15 13:44:03 2013] source mask rpix=2.2, npix_max = 28, mask sum = 16, frac = 0.560
[Sat Jun 15 13:44:03 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.45"
[Sat Jun 15 14:20:49 2013] fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_src21.ximg exists
[Sat Jun 15 14:20:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_src21.csv
[Sat Jun 15 14:20:49 2013] fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Jun 15 14:20:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_src21.csv
[Sat Jun 15 14:20:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:20:50 2013] fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Jun 15 14:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sat Jun 15 14:20:50 2013] fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Jun 15 14:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sat Jun 15 14:20:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370901_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 14:53:44 2013] Warning, spatial fit 21 centroid is now closest to src. 1
[Sat Jun 15 14:53:44 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 14:53:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 14:53:44 2013] Assessing source extent using major
[Sat Jun 15 14:53:44 2013] Source does appear to be extended
[Sat Jun 15 14:53:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 14:53:44 2013] Source is confused with source 1
[Sat Jun 15 15:36:53 2013] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 15:36:53 2013] Initial guess for spatial extent in simple fitting = 9.45"
[Sat Jun 15 15:36:53 2013] source mask rpix=2.2, npix_max = 28, mask sum = 16, frac = 0.560
[Sat Jun 15 15:36:53 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 9.45"
[Sat Jun 15 16:09:44 2013] fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_src21.ximg exists
[Sat Jun 15 16:09:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_src21.csv
[Sat Jun 15 16:09:44 2013] fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Jun 15 16:09:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_src21.csv
[Sat Jun 15 16:09:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 16:09:44 2013] fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Jun 15 16:09:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat Jun 15 16:09:44 2013] fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Jun 15 16:09:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat Jun 15 16:09:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370901_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 16:47:04 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 58.826417 pixels away
[Sat Jun 15 16:47:04 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.632700 pixels away
[Sat Jun 15 16:47:04 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 16:47:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 16:47:04 2013] Assessing source extent using major
[Sat Jun 15 16:47:04 2013] Source does appear to be extended
[Sat Jun 15 16:47:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 17:28:43 2013] XMMSAS src. selection expression = ellipse(23143.680054, 19222.000000, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 15 17:28:43 2013] Writing source region out to fullrun_mos1_xmm0060370901_pi300-10000_pass1_cl_src24_src.reg
[Sat Jun 15 17:28:43 2013] Extracting stamp from image fullrun_mos1_xmm0060370901_pi300-10000_cl_sm2.00.img.gz, (192, 146) - (342, 296)
[Sat Jun 15 17:28:43 2013] XMMSAS bgd. selection expression = annulus(23143.680054, 19222.000000, 2175.000000, 4350.000000, X, Y) && !ellipse(23131.928894, 19979.003281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25226.678800, 23927.313600, 391.643211, 391.643211, 0.000000, X, Y) && !ellipse(20803.543869, 19941.422668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20072.731800, 20799.741600, 345.017610, 345.017610, 0.000000, X, Y) && !ellipse(27119.429779, 24369.815063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25500.153000, 21134.679600, 449.793613, 320.857609, 50.916480, X, Y) && !ellipse(26920.513754, 15796.637400, 415.736812, 415.736812, 0.000000, X, Y)
[Sat Jun 15 17:28:43 2013] Writing fullrun_mos1_xmm0060370901_pi300-10000_pass1_cl_src24.gif
[Sat Jun 15 17:35:48 2013] Mean detx,y = (4163.89, 2938.15) 
[Sat Jun 15 17:35:49 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 17:36:45 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 17:36:45 2013] Setting source spectrum file to fullrun_mos1_xmm0060370901_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jun 15 17:36:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0060370901_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Jun 15 17:56:58 2013] Not generating rmf since there are only 41 counts
[Sat Jun 15 17:56:58 2013] rmf not generated due to insufficient counts
[Sat Jun 15 18:22:11 2013] Updating aperture counts using extracted products
[Sat Jun 15 18:22:11 2013] Total counts from fullrun_mos1_xmm0060370901_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 1334.00
[Sat Jun 15 18:22:11 2013] Total counts from fullrun_mos1_xmm0060370901_pi300-10000_pass1_cl_src24_bgd.pi.gz = 3486.00
[Sat Jun 15 18:22:11 2013] Got source and background scale factors 4835908.000000, 37697476.000000
[Sat Jun 15 18:22:11 2013] User source parameters:
  Position = (266.6, 221.5) = 15 44 11.39 53 55 14.3
  Extent = 21.7" x 21.7", rotation angle = 0
  Source aperture counts = 886.8 +/- 37.5
  Background aperture counts = 447.2
  Rate = 0.03 +/- 0.001

[Sat Jun 15 18:22:11 2013] Updating counts from extracted products
[Sat Jun 15 18:22:11 2013] Set source signif. to 886.81/21.15 = 41.94
[Sat Jun 15 18:22:12 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 18:22:12 2013] Using photon index=1.80, rate=0.0336, arf fullrun_mos1_xmm0060370901_pi300-10000_pass1_cl_src24.arf
[Sat Jun 15 18:22:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 18:22:12 2013] Updating source flux to 3.4e-13
[Sat Jun 15 18:22:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 18:22:21 2013] xmm0060370901/analysis//spectral/fullrun_mos1_xmm0060370901_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete