[Thu May 17 05:26:42 2012] Detection parameters:
  Position = (307.7, 288.2) = 15 43 51.98 54 0 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 344.1 +/- 24.6
  Background counts = 44.2
  Rate = 0.05 +/- 0.003

[Thu May 17 05:26:42 2012] Off-axis axis estimate = 1.00'
[Thu May 17 05:30:04 2012] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Thu May 17 05:30:04 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Thu May 17 05:30:04 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Thu May 17 05:30:04 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.93"
[Thu May 17 05:57:38 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 17 05:57:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_src2.csv
[Thu May 17 05:57:38 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 17 05:57:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_src2.csv
[Thu May 17 05:57:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 05:57:38 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 17 05:57:38 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 17 05:57:38 2012] Fit fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 17 06:58:48 2012] Spatial fit model total counts = 452.249000, observed total counts = 432.000000
[Thu May 17 06:58:48 2012] Offset between fit and detection position for source 2 = 0.130954 pixels
[Thu May 17 06:58:48 2012] 454.578000 total counts/ 285.992000 bgd. counts: snr = 9.968839
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.130954 pixels
  Position = (307.6, 288.3) = 15 43 52.01 54 0 4.1
  Extent = 5.6 (4.9-6.5)", rotation angle = 0
  Source counts = 168.6 +/- 21.3
  Background counts = 286.0
  Rate = 0.03 +/- 0.004
[Thu May 17 06:58:48 2012] Vigneting correction estimate = 1.000000
[Thu May 17 06:58:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 06:58:48 2012] Assessing source extent using major axis lower bound
[Thu May 17 06:58:48 2012] Source does appear to be extended
[Thu May 17 06:58:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 06:59:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 06:59:05 2012] Initial guess for spatial extent in simple fitting = 5.59"
[Thu May 17 06:59:05 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.706
[Thu May 17 06:59:05 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.59"
[Thu May 17 07:30:45 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 17 07:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src2.csv
[Thu May 17 07:30:45 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 17 07:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src2.csv
[Thu May 17 07:30:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 07:30:45 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 17 07:30:45 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 17 07:30:45 2012] Fit fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May 17 08:29:31 2012] Spatial fit model total counts = 452.822000, observed total counts = 432.000000
[Thu May 17 08:29:31 2012] Offset between fit and detection position for source 2 = 0.003002 pixels
[Thu May 17 08:29:31 2012] 455.019000 total counts/ 284.219000 bgd. counts: snr = 10.131210
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.003002 pixels
  Position = (307.6, 288.3) = 15 43 52.01 54 0 4.1
  Extent = 5.7 (4.9-6.4)", rotation angle = 0
  Source counts = 170.8 +/- 21.3
  Background counts = 284.2
  Rate = 0.03 +/- 0.004
[Thu May 17 08:29:31 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:29:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:29:31 2012] Assessing source extent using major axis lower bound
[Thu May 17 08:29:31 2012] Source does appear to be extended
[Thu May 17 08:29:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 08:29:48 2012] XMMSAS src. selection expression = ellipse(26712.566800, 25036.051600, 340.297210, 340.297210, 0.000000, X, Y)
[Thu May 17 08:29:48 2012] Writing source region out to fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 17 08:29:48 2012] Extracting stamp from image fullrun_pn_xmm0060370101_pi300-10000_cl_sm2.00.img.gz, (288, 269) - (327, 308)
[Thu May 17 08:29:48 2012] XMMSAS bgd. selection expression = annulus(26712.566800, 25036.051600, 567.162016, 1134.324033, X, Y) && !ellipse(25425.855180, 23828.796600, 438.839213, 438.839213, 0.000000, X, Y) && !ellipse(27311.089971, 24235.650389, 693.953620, 314.780536, 80.503581, X, Y)
[Thu May 17 08:29:48 2012] Writing fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src2.gif
[Thu May 17 08:30:55 2012] Mean detx,y = (-1539.92, 386.44) 
[Thu May 17 08:30:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 08:31:35 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 08:31:36 2012] Setting source spectrum file to fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 08:31:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 17 09:23:00 2012] Updating aperture counts using extracted products
[Thu May 17 09:23:00 2012] Error reading totcts from fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 09:23:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 09:23:01 2012] Using photon index=1.80, rate=0.032, arf fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src2.arf
[Thu May 17 09:23:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 09:23:01 2012] Updating source flux to 1e-13
[Thu May 17 09:24:28 2012] Reading fit data from xmm0060370101/analysis//spectral/fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src2_pl.csv
[Thu May 17 09:24:28 2012] Spectral fit parameter nH value = 2.26295e+12
[Thu May 17 09:24:28 2012] Spectral fit parameter PhoIndex value = 2.09611
[Thu May 17 09:24:28 2012] Failed to get F(0.3-8.0) from xmm0060370101/analysis//spectral/fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu May 17 09:24:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 09:24:28 2012] Using Nh = 2.3e+12, photon index=2.10, rate=0.032, arf fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src2.arf
[Thu May 17 09:24:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 09:24:28 2012] Updating source flux to 8.3e-14