[Thu May 17 05:26:42 2012] Detection parameters:
  Position = (269.0, 224.9) = 15 44 11.02 53 55 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 529.7 +/- 27.6
  Background counts = 41.7
  Rate = 0.06 +/- 0.003

[Thu May 17 05:26:42 2012] Off-axis axis estimate = 5.74'
[Thu May 17 05:30:04 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Thu May 17 05:30:04 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Thu May 17 05:30:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.683
[Thu May 17 05:30:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.30"
[Thu May 17 05:57:38 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 17 05:57:38 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 17 05:57:38 2012] Fit fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu May 17 05:57:38 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 17 05:57:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 17 05:57:38 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 17 05:57:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 17 05:57:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 06:58:48 2012] Source 1 is offset by 6.876464 and 5.809646 pixels which is larger than
2 X fitted extent = 0.796299 x 0.796299, not incorporating fit results
[Thu May 17 06:58:48 2012] Vigneting correction estimate = 1.000000
[Thu May 17 06:58:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 06:58:48 2012] Assessing source extent using major
[Thu May 17 06:58:48 2012] Source does appear to be extended
[Thu May 17 06:58:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 06:59:05 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Thu May 17 06:59:05 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Thu May 17 06:59:05 2012] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.683
[Thu May 17 06:59:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.30"
[Thu May 17 07:30:45 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 17 07:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src1.csv
[Thu May 17 07:30:45 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 17 07:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src1.csv
[Thu May 17 07:30:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 07:30:45 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 17 07:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 17 07:30:45 2012] fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 17 07:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 17 07:30:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 08:29:31 2012] Source 1 is offset by -4.384708 and -5.442228 pixels which is larger than
2 X fitted extent = 5.140920 x 0.642616, not incorporating fit results
[Thu May 17 08:29:31 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:29:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:29:31 2012] Assessing source extent using major
[Thu May 17 08:29:31 2012] Source does appear to be extended
[Thu May 17 08:29:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 08:29:48 2012] XMMSAS src. selection expression = ellipse(23355.028351, 19521.215164, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 08:29:48 2012] Writing source region out to fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src1_src.reg
[Thu May 17 08:29:48 2012] Extracting stamp from image fullrun_pn_xmm0060370101_pi300-10000_cl_sm2.00.img.gz, (232, 187) - (307, 262)
[Thu May 17 08:29:48 2012] XMMSAS bgd. selection expression = annulus(23355.028351, 19521.215164, 1087.500000, 2175.000000, X, Y) && !ellipse(21058.565600, 19936.760000, 343.716010, 343.716010, 0.000000, X, Y)
[Thu May 17 08:29:48 2012] Writing fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src1.gif
[Thu May 17 08:29:58 2012] Mean detx,y = (3487.52, -3749.26) 
[Thu May 17 08:30:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 08:30:42 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 08:30:43 2012] Setting source spectrum file to fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 08:30:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 17 08:40:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 17 08:40:43 2012] rmf not generated due to insufficient counts
[Thu May 17 09:23:00 2012] Updating aperture counts using extracted products
[Thu May 17 09:23:00 2012] Error reading totcts from fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 09:23:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 09:23:01 2012] Using photon index=1.80, rate=0.062, arf fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src1.arf
[Thu May 17 09:23:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 09:23:01 2012] Getting flux using calc_pl_flux failed
[Thu May 17 09:23:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 17 09:24:28 2012] xmm0060370101/analysis//spectral/fullrun_pn_xmm0060370101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete