[Thu May 17 05:27:14 2012] Detection parameters:
  Position = (296.1, 242.2) = 15 43 57.66 53 56 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.4 +/- 9.8
  Background counts = 12.3
  Rate = 0.005 +/- 0.001

[Thu May 17 05:27:14 2012] Off-axis axis estimate = 4.08'
[Thu May 17 05:57:38 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Thu May 17 05:57:38 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Thu May 17 05:57:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Thu May 17 05:57:38 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.47"
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src7.ximg exists
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu May 17 06:22:20 2012] Fit fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src7 appears to have run properly
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu May 17 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu May 17 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May 17 06:22:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 06:58:51 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.568047 pixels away
[Thu May 17 06:58:51 2012] Vigneting correction estimate = 1.000000
[Thu May 17 06:58:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 06:58:51 2012] Assessing source extent using major
[Thu May 17 06:58:51 2012] Source does appear to be extended
[Thu May 17 06:58:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 07:30:45 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Thu May 17 07:30:45 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Thu May 17 07:30:45 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Thu May 17 07:30:45 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.47"
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src7.ximg exists
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu May 17 07:58:57 2012] Fit fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src7 appears to have run properly
[Thu May 17 07:58:58 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu May 17 07:58:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May 17 07:58:58 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May 17 07:58:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May 17 07:58:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 08:29:35 2012] Source 8 is offset by -5.900723 and -7.525085 pixels which is larger than
2 X fitted extent = 0.843724 x 0.843724, not incorporating fit results
[Thu May 17 08:29:35 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:29:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:29:35 2012] Assessing source extent using major
[Thu May 17 08:29:35 2012] Source does appear to be extended
[Thu May 17 08:29:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 08:57:59 2012] XMMSAS src. selection expression = ellipse(25715.721100, 21025.051636, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 08:57:59 2012] Writing source region out to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src8_src.reg
[Thu May 17 08:57:59 2012] Extracting stamp from image fullrun_mos1_xmm0060370101_pi300-10000_cl_sm2.00.img.gz, (259, 205) - (334, 280)
[Thu May 17 08:57:59 2012] XMMSAS bgd. selection expression = annulus(25715.721100, 21025.051636, 1087.500000, 2175.000000, X, Y) && !ellipse(23308.915802, 19774.280609, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 17 08:57:59 2012] Writing fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src8.gif
[Thu May 17 09:00:09 2012] Mean detx,y = (3176.70, 368.93) 
[Thu May 17 09:00:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 09:00:23 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 09:00:24 2012] Setting source spectrum file to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 17 09:00:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu May 17 09:12:24 2012] Not generating rmf since there are only 48 counts
[Thu May 17 09:12:24 2012] rmf not generated due to insufficient counts
[Thu May 17 09:23:02 2012] Updating aperture counts using extracted products
[Thu May 17 09:23:02 2012] Error reading totcts from fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 17 09:23:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 09:23:03 2012] Using photon index=1.80, rate=0.00484, arf fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src8.arf
[Thu May 17 09:23:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 09:23:03 2012] Updating source flux to 4.9e-14
[Thu May 17 09:23:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting