[Thu May 17 05:27:14 2012] Detection parameters:
  Position = (408.2, 414.8) = 15 43 2.15 54 9 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.0 +/- 9.3
  Background counts = 8.6
  Rate = 0.004 +/- 0.0009

[Thu May 17 05:27:14 2012] Off-axis axis estimate = 11.60'
[Thu May 17 05:57:38 2012] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Thu May 17 05:57:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 05:57:38 2012] Initial guess for spatial extent in simple fitting = 12.23"
[Thu May 17 05:57:38 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.118
[Thu May 17 05:57:38 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.23"
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src8.ximg exists
[Thu May 17 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src8.csv
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu May 17 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src8.csv
[Thu May 17 06:22:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May 17 06:22:20 2012] Fit fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu May 17 06:58:51 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.742611 pixels away
[Thu May 17 06:58:51 2012] Vigneting correction estimate = 1.000000
[Thu May 17 06:58:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 06:58:51 2012] Assessing source extent using major
[Thu May 17 06:58:51 2012] Source does appear to be extended
[Thu May 17 06:58:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 07:30:45 2012] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Thu May 17 07:30:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 07:30:45 2012] Initial guess for spatial extent in simple fitting = 12.23"
[Thu May 17 07:30:45 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.118
[Thu May 17 07:30:45 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 12.23"
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src8.ximg exists
[Thu May 17 07:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src8.csv
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu May 17 07:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src8.csv
[Thu May 17 07:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 07:58:58 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu May 17 07:58:58 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu May 17 07:58:58 2012] Fit fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu May 17 08:29:35 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.000566 pixels away
[Thu May 17 08:29:35 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:29:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:29:35 2012] Assessing source extent using major
[Thu May 17 08:29:35 2012] Source does appear to be extended
[Thu May 17 08:29:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 08:57:59 2012] XMMSAS src. selection expression = ellipse(35467.869385, 36036.204956, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 08:57:59 2012] Writing source region out to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src6_src.reg
[Thu May 17 08:57:59 2012] Extracting stamp from image fullrun_mos1_xmm0060370101_pi300-10000_cl_sm2.00.img.gz, (371, 377) - (446, 452)
[Thu May 17 08:57:59 2012] XMMSAS bgd. selection expression = annulus(35467.869385, 36036.204956, 1087.500000, 2175.000000, X, Y)
[Thu May 17 08:57:59 2012] Writing fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src6.gif
[Thu May 17 09:00:28 2012] Mean detx,y = (-8081.80, -13559.01) 
[Thu May 17 09:00:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 09:00:57 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 09:00:58 2012] Setting source spectrum file to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 17 09:00:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 17 09:12:31 2012] Not generating rmf since there are only 46 counts
[Thu May 17 09:12:31 2012] rmf not generated due to insufficient counts
[Thu May 17 09:23:02 2012] Updating aperture counts using extracted products
[Thu May 17 09:23:02 2012] Error reading totcts from fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 17 09:23:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 09:23:03 2012] Using photon index=1.80, rate=0.00434, arf fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src6.arf
[Thu May 17 09:23:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 09:23:03 2012] Updating source flux to 1.3e-13
[Thu May 17 09:23:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting