[Thu May 17 05:27:14 2012] Detection parameters:
  Position = (292.6, 274.2) = 15 43 59.41 53 59 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.2 +/- 17.0
  Background counts = 12.6
  Rate = 0.02 +/- 0.002

[Thu May 17 05:27:14 2012] Off-axis axis estimate = 1.81'
[Thu May 17 05:57:38 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu May 17 05:57:38 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Thu May 17 05:57:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Thu May 17 05:57:38 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.33"
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 17 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src3.csv
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 17 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src3.csv
[Thu May 17 06:22:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 17 06:22:20 2012] Fit fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 17 06:58:51 2012] Spatial fit model total counts = 213.079000, observed total counts = 213.000000
[Thu May 17 06:58:51 2012] Offset between fit and detection position for source 3 = 0.102498 pixels
[Thu May 17 06:58:51 2012] 214.442000 total counts/ 113.585000 bgd. counts: snr = 9.463364
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.102498 pixels
  Position = (292.7, 274.3) = 15 43 59.38 53 59 3.0
  Extent = 4.6 (3.8-5.4)", rotation angle = 0
  Source counts = 100.9 +/- 14.6
  Background counts = 113.6
  Rate = 0.01 +/- 0.002
[Thu May 17 06:58:51 2012] Vigneting correction estimate = 1.000000
[Thu May 17 06:58:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 06:58:51 2012] Assessing source extent using major axis lower bound
[Thu May 17 06:58:51 2012] Source does appear to be extended
[Thu May 17 06:58:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 07:30:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 07:30:45 2012] Initial guess for spatial extent in simple fitting = 4.58"
[Thu May 17 07:30:45 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.934
[Thu May 17 07:30:45 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.58"
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 17 07:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src3.csv
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 17 07:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src3.csv
[Thu May 17 07:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 07:58:58 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 17 07:58:58 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 17 07:58:58 2012] Fit fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 17 08:29:35 2012] Spatial fit model total counts = 213.220000, observed total counts = 213.000000
[Thu May 17 08:29:35 2012] Offset between fit and detection position for source 3 = 0.012088 pixels
[Thu May 17 08:29:35 2012] 214.598000 total counts/ 114.463000 bgd. counts: snr = 9.359515
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.012088 pixels
  Position = (292.7, 274.3) = 15 43 59.37 53 59 3.0
  Extent = 4.5 (3.8-5.4)", rotation angle = 0
  Source counts = 100.1 +/- 14.6
  Background counts = 114.5
  Rate = 0.01 +/- 0.002
[Thu May 17 08:29:35 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:29:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:29:35 2012] Assessing source extent using major axis lower bound
[Thu May 17 08:29:35 2012] Source does appear to be extended
[Thu May 17 08:29:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 08:57:59 2012] XMMSAS src. selection expression = ellipse(25414.451800, 23813.320400, 269.470808, 269.470808, 0.000000, X, Y)
[Thu May 17 08:57:59 2012] Writing source region out to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src3_src.reg
[Thu May 17 08:57:59 2012] Extracting stamp from image fullrun_mos1_xmm0060370101_pi300-10000_cl_sm2.00.img.gz, (277, 259) - (308, 290)
[Thu May 17 08:57:59 2012] XMMSAS bgd. selection expression = annulus(25414.451800, 23813.320400, 449.118013, 898.236026, X, Y)
[Thu May 17 08:57:59 2012] Writing fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src3.gif
[Thu May 17 08:58:44 2012] Mean detx,y = (438.34, -239.63) 
[Thu May 17 08:58:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 08:58:58 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 08:58:59 2012] Setting source spectrum file to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 17 08:58:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 17 09:23:02 2012] Updating aperture counts using extracted products
[Thu May 17 09:23:02 2012] Error reading totcts from fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 17 09:23:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 09:23:03 2012] Using photon index=1.80, rate=0.0103, arf fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src3.arf
[Thu May 17 09:23:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 09:23:03 2012] Updating source flux to 1.3e-13