[Thu May 17 05:27:13 2012] Detection parameters:
  Position = (268.5, 227.8) = 15 44 11.28 53 55 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 300.0 +/- 25.8
  Background counts = 12.3
  Rate = 0.04 +/- 0.004

[Thu May 17 05:27:14 2012] Off-axis axis estimate = 5.56'
[Thu May 17 05:57:38 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Thu May 17 05:57:38 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Thu May 17 05:57:38 2012] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.621
[Thu May 17 05:57:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.21"
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 17 06:22:20 2012] Fit fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 17 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 17 06:22:20 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 17 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 17 06:22:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 06:58:51 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.177571 pixels away
[Thu May 17 06:58:51 2012] Vigneting correction estimate = 1.000000
[Thu May 17 06:58:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 06:58:51 2012] Assessing source extent using major
[Thu May 17 06:58:51 2012] Source does appear to be extended
[Thu May 17 06:58:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 07:30:45 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Thu May 17 07:30:45 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Thu May 17 07:30:45 2012] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.621
[Thu May 17 07:30:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.21"
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 17 07:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src1.csv
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 17 07:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src1.csv
[Thu May 17 07:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 17 07:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 17 07:58:57 2012] fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 17 07:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 17 07:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0060370101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 08:29:35 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.540624 pixels away
[Thu May 17 08:29:35 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 25.944688 pixels away
[Thu May 17 08:29:35 2012] Vigneting correction estimate = 1.000000
[Thu May 17 08:29:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 08:29:35 2012] Assessing source extent using major
[Thu May 17 08:29:35 2012] Source does appear to be extended
[Thu May 17 08:29:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 08:57:59 2012] XMMSAS src. selection expression = ellipse(23308.915802, 19774.280609, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 08:57:59 2012] Writing source region out to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src1_src.reg
[Thu May 17 08:57:59 2012] Extracting stamp from image fullrun_mos1_xmm0060370101_pi300-10000_cl_sm2.00.img.gz, (231, 190) - (306, 265)
[Thu May 17 08:57:59 2012] XMMSAS bgd. selection expression = annulus(23308.915802, 19774.280609, 1087.500000, 2175.000000, X, Y) && !ellipse(21017.269620, 19914.542800, 192.964806, 192.964806, 0.000000, X, Y) && !ellipse(25715.721100, 21025.051636, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 17 08:57:59 2012] Writing fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src1.gif
[Thu May 17 08:58:02 2012] Mean detx,y = (3756.05, 3066.25) 
[Thu May 17 08:58:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 08:58:20 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 08:58:21 2012] Setting source spectrum file to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 08:58:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 17 09:02:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 17 09:02:49 2012] rmf not generated due to insufficient counts
[Thu May 17 09:23:02 2012] Updating aperture counts using extracted products
[Thu May 17 09:23:02 2012] Error reading totcts from fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 09:23:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 09:23:02 2012] Using photon index=1.80, rate=0.0424, arf fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src1.arf
[Thu May 17 09:23:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 09:23:03 2012] Updating source flux to 4.9e-13
[Thu May 17 09:23:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 17 09:23:27 2012] xmm0060370101/analysis//spectral/fullrun_mos1_xmm0060370101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete