[Sun Jul  8 21:37:04 2012] Detection parameters:
  Position = (185.0, 205.8) = 10 40 26.99 20 45 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1376.2 +/- 44.3
  Background counts = 7.0
  Rate = 0.2 +/- 0.006

[Sun Jul  8 21:37:04 2012] Off-axis axis estimate = 10.62'
[Sun Jul  8 22:05:44 2012] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 22:05:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul  8 22:05:44 2012] Initial guess for spatial extent in simple fitting = 11.74"
[Sun Jul  8 22:05:44 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.880
[Sun Jul  8 22:05:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.74"
[Sun Jul  8 22:20:34 2012] fullrun_mos2_xmm0059800101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul  8 22:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059800101_pi300-10000_cl_pass0_src1.csv
[Sun Jul  8 22:20:34 2012] fullrun_mos2_xmm0059800101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul  8 22:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059800101_pi300-10000_cl_pass0_src1.csv
[Sun Jul  8 22:20:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059800101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059800101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 22:20:34 2012] fullrun_mos2_xmm0059800101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul  8 22:20:34 2012] fullrun_mos2_xmm0059800101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul  8 22:20:34 2012] Fit fullrun_mos2_xmm0059800101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul  8 22:20:42 2012] Spatial fit model total counts = 1366.860000, observed total counts = 1367.000000
[Sun Jul  8 22:20:42 2012] Offset between fit and detection position for source 1 = 0.221101 pixels
[Sun Jul  8 22:20:42 2012] 1378.712000 total counts/ 375.472000 bgd. counts: snr = 51.774518
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.221101 pixels
  Position = (185.2, 205.6) = 10 40 26.94 20 45 44.6
  Extent = 6.0 (5.7-6.3)", rotation angle = 0
  Source counts = 1003.2 +/- 37.1
  Background counts = 375.5
  Rate = 0.07 +/- 0.003
[Sun Jul  8 22:20:42 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 22:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 22:20:42 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 22:20:42 2012] Source does appear to be extended
[Sun Jul  8 22:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 22:47:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul  8 22:47:43 2012] Initial guess for spatial extent in simple fitting = 6.03"
[Sun Jul  8 22:47:43 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.125
[Sun Jul  8 22:47:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.03"
[Sun Jul  8 23:01:37 2012] fullrun_mos2_xmm0059800101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul  8 23:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059800101_pi300-10000_cl_pass1_src1.csv
[Sun Jul  8 23:01:37 2012] fullrun_mos2_xmm0059800101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul  8 23:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059800101_pi300-10000_cl_pass1_src1.csv
[Sun Jul  8 23:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059800101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059800101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 23:01:38 2012] fullrun_mos2_xmm0059800101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul  8 23:01:38 2012] fullrun_mos2_xmm0059800101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul  8 23:01:38 2012] Fit fullrun_mos2_xmm0059800101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul  8 23:01:45 2012] Spatial fit model total counts = 1267.000000, observed total counts = 1267.000000
[Sun Jul  8 23:01:45 2012] Offset between fit and detection position for source 1 = 0.012082 pixels
[Sun Jul  8 23:01:45 2012] 1278.977000 total counts/ 305.163000 bgd. counts: snr = 55.745533
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012082 pixels
  Position = (185.2, 205.6) = 10 40 26.95 20 45 44.6
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 973.8 +/- 35.8
  Background counts = 305.2
  Rate = 0.07 +/- 0.002
[Sun Jul  8 23:01:45 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 23:01:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 23:01:45 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 23:01:45 2012] Source does appear to be extended
[Sun Jul  8 23:01:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 23:17:16 2012] XMMSAS src. selection expression = ellipse(16061.289680, 17841.413200, 348.144610, 348.144610, 0.000000, X, Y)
[Sun Jul  8 23:17:16 2012] Writing source region out to fullrun_mos2_xmm0059800101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul  8 23:17:16 2012] Extracting stamp from image fullrun_mos2_xmm0059800101_pi300-10000_cl_sm2.00.img.gz, (165, 186) - (205, 226)
[Sun Jul  8 23:17:16 2012] XMMSAS bgd. selection expression = annulus(16061.289680, 17841.413200, 580.241017, 1160.482033, X, Y)
[Sun Jul  8 23:17:16 2012] Writing fullrun_mos2_xmm0059800101_pi300-10000_pass1_cl_src1.gif
[Sun Jul  8 23:17:17 2012] Mean detx,y = (-11002.63, 2063.31) 
[Sun Jul  8 23:17:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 23:17:22 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 23:17:22 2012] Setting source spectrum file to fullrun_mos2_xmm0059800101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul  8 23:17:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0059800101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul  8 23:29:47 2012] Updating aperture counts using extracted products
[Sun Jul  8 23:29:47 2012] Error reading totcts from fullrun_mos2_xmm0059800101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul  8 23:29:48 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 23:29:48 2012] Using photon index=1.80, rate=0.0678, arf fullrun_mos2_xmm0059800101_pi300-10000_pass1_cl_src1.arf
[Sun Jul  8 23:29:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 23:29:48 2012] Updating source flux to 1.4e-12
[Sun Jul  8 23:30:13 2012] Reading fit data from xmm0059800101/analysis//spectral/fullrun_mos2_xmm0059800101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul  8 23:30:13 2012] Spectral fit parameter nH value = 0.0
[Sun Jul  8 23:30:13 2012] Spectral fit parameter PhoIndex value = 1.85983
[Sun Jul  8 23:30:13 2012] Failed to get F(0.3-8.0) from xmm0059800101/analysis//spectral/fullrun_mos2_xmm0059800101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul  8 23:30:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 23:30:13 2012] Using Nh = 0, photon index=1.86, rate=0.0678, arf fullrun_mos2_xmm0059800101_pi300-10000_pass1_cl_src1.arf
[Sun Jul  8 23:30:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 23:30:13 2012] Updating source flux to 1.4e-12