[Wed Sep 28 18:08:18 2011] Detection parameters:
  Position = (272.8, 338.7) = 17 17 6.83 -62 44 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.5 +/- 8.9
  Background counts = 5.0
  Rate = 0.001 +/- 0.0002

[Wed Sep 28 18:08:18 2011] Off-axis axis estimate = 3.46'
[Wed Sep 28 18:28:50 2011] Using EEF radius (= 8.16 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 18:28:50 2011] Initial guess for spatial extent in simple fitting = 8.16"
[Wed Sep 28 18:28:50 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.108
[Wed Sep 28 18:28:50 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 8.16"
[Wed Sep 28 18:41:38 2011] fullrun_mos2_xmm0059770101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Sep 28 18:41:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059770101_pi300-10000_cl_pass0_src6.csv
[Wed Sep 28 18:41:38 2011] fullrun_mos2_xmm0059770101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Sep 28 18:41:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059770101_pi300-10000_cl_pass0_src6.csv
[Wed Sep 28 18:41:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059770101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059770101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 18:41:38 2011] fullrun_mos2_xmm0059770101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Sep 28 18:41:38 2011] fullrun_mos2_xmm0059770101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Sep 28 18:41:38 2011] Fit fullrun_mos2_xmm0059770101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Sep 28 18:41:44 2011] Source 7 is offset by 7.299797 and 6.178551 pixels which is larger than
2 X fitted extent = 0.937724 x 0.937724, not incorporating fit results
[Wed Sep 28 18:41:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 18:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 18:41:44 2011] Assessing source extent using major
[Wed Sep 28 18:41:44 2011] Source does appear to be extended
[Wed Sep 28 18:41:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 19:01:23 2011] Using EEF radius (= 8.16 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 19:01:23 2011] Initial guess for spatial extent in simple fitting = 8.16"
[Wed Sep 28 19:01:23 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.108
[Wed Sep 28 19:01:23 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 8.16"
[Wed Sep 28 19:12:55 2011] fullrun_mos2_xmm0059770101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Sep 28 19:12:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059770101_pi300-10000_cl_pass1_src6.csv
[Wed Sep 28 19:12:55 2011] fullrun_mos2_xmm0059770101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Sep 28 19:12:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059770101_pi300-10000_cl_pass1_src6.csv
[Wed Sep 28 19:12:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059770101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059770101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 19:12:55 2011] fullrun_mos2_xmm0059770101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Sep 28 19:12:55 2011] fullrun_mos2_xmm0059770101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Sep 28 19:12:55 2011] Fit fullrun_mos2_xmm0059770101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Sep 28 19:13:00 2011] Spatial fit model total counts = 78.977600, observed total counts = 79.000000
[Wed Sep 28 19:13:00 2011] Offset between fit and detection position for source 7 = 0.321536 pixels
[Wed Sep 28 19:13:00 2011] 78.131300 total counts/ 39.848700 bgd. counts: snr = 6.064491
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.321536 pixels
  Position = (272.8, 338.4) = 17 17 6.82 -62 44 48.5
  Extent = 6.3 (3.4-8.9)", rotation angle = 0
  Source counts = 38.3 +/- 8.8
  Background counts = 39.8
  Rate = 0.006 +/- 0.001
[Wed Sep 28 19:13:00 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 19:13:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 19:13:00 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 19:13:00 2011] Source does appear to be extended
[Wed Sep 28 19:13:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 19:59:40 2011] XMMSAS src. selection expression = ellipse(23687.568760, 29388.529400, 380.317811, 380.317811, 0.000000, X, Y)
[Wed Sep 28 19:59:40 2011] Writing source region out to fullrun_mos2_xmm0059770101_pi300-10000_pass1_cl_src7_src.reg
[Wed Sep 28 19:59:40 2011] Extracting stamp from image fullrun_mos2_xmm0059770101_pi300-10000_cl_sm2.00.img.gz, (251, 316) - (295, 360)
[Wed Sep 28 19:59:40 2011] XMMSAS bgd. selection expression = annulus(23687.568760, 29388.529400, 633.863018, 1267.726036, X, Y)
[Wed Sep 28 19:59:40 2011] Writing fullrun_mos2_xmm0059770101_pi300-10000_pass1_cl_src7.gif
[Wed Sep 28 20:00:11 2011] Mean detx,y = (-1088.00, -5060.24) 
[Wed Sep 28 20:00:11 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 20:00:15 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 20:00:15 2011] Setting source spectrum file to fullrun_mos2_xmm0059770101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Sep 28 20:00:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0059770101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Sep 28 20:04:55 2011] Not generating rmf since there are only 38 counts
[Wed Sep 28 20:04:55 2011] rmf not generated due to insufficient counts
[Wed Sep 28 20:05:38 2011] Updating aperture counts using extracted products
[Wed Sep 28 20:05:38 2011] Error reading totcts from fullrun_mos2_xmm0059770101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Sep 28 20:05:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 20:05:38 2011] Using photon index=1.80, rate=0.0059, arf fullrun_mos2_xmm0059770101_pi300-10000_pass1_cl_src7.arf
[Wed Sep 28 20:05:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 20:05:38 2011] Updating source flux to 7.9e-14
[Wed Sep 28 20:05:51 2011] Flag b found in src. 7 procflags, skipping spectral fitting
[Wed Sep 28 20:05:51 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting