[Thu Jun 21 22:41:37 2012] Detection parameters:
  Position = (382.8, 232.6) = 16 8 57.83 54 28 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.7 +/- 26.6
  Background counts = 263.6
  Rate = 0.02 +/- 0.004

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 7.76'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Thu Jun 21 22:48:17 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.911
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 10.31"
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src98.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src98.csv
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src98_1.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src98.csv
[Fri Jun 22 06:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:54 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Fri Jun 22 06:51:54 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Fri Jun 22 06:51:54 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly
[Fri Jun 22 07:01:08 2012] Spatial fit model total counts = 482.439000, observed total counts = 441.000000
[Fri Jun 22 07:01:08 2012] Offset between fit and detection position for source 98 = 2.790072 pixels
[Fri Jun 22 07:01:08 2012] Warning, changing simple spatial fit ID from 98 to 96
[Fri Jun 22 07:01:08 2012] 465.219000 total counts/ 291.807000 bgd. counts: snr = 10.151525
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 2.790072 pixels
  Position = (385.0, 234.4) = 16 8 56.77 54 28 10.3
  Extent = 21.1 (21.0-42.1)", rotation angle = 0
  Source counts = 173.4 +/- 21.6
  Background counts = 291.8
  Rate = 0.3 +/- 0.04
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 96
[Fri Jun 22 07:01:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 21.06"
[Fri Jun 22 07:01:24 2012] source mask rpix=4.8, npix_max = 114, mask sum = 104, frac = 0.911
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 94 for pass 1, mean size = 21.06"
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src94.ximg exists
[Fri Jun 22 16:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src94.csv
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src94_1.ximg exists
[Fri Jun 22 16:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src94.csv
[Fri Jun 22 16:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:05:29 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src94.ximg exists
[Fri Jun 22 16:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src94.csv
[Fri Jun 22 16:05:29 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src94_1.ximg exists
[Fri Jun 22 16:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src94.csv
[Fri Jun 22 16:05:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:16:12 2012] Warning, spatial fit 94 centroid is now closest to src. 45
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:38 2012] XMMSAS src. selection expression = ellipse(33443.682000, 20346.046600, 1263.780036, 1263.780036, 0.000000, X, Y)
[Fri Jun 22 16:16:38 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src98_src.reg
[Fri Jun 22 16:16:38 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (312, 162) - (458, 307)
[Fri Jun 22 16:16:38 2012] XMMSAS bgd. selection expression = annulus(33443.682000, 20346.046600, 2106.300061, 4212.600121, X, Y) && !ellipse(33458.444977, 24499.091095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34007.348389, 25342.373535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36269.258118, 25094.850464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34420.640869, 17783.145370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36479.184000, 17595.170000, 1861.664054, 1861.664054, 0.000000, X, Y) && !ellipse(35631.582000, 25732.860000, 1698.488049, 1698.488049, 0.000000, X, Y) && !ellipse(34597.269348, 19433.422638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34133.284393, 19262.539642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35285.240540, 18481.225586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33291.249817, 18665.554977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35944.779022, 18460.823013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34660.364000, 17792.425600, 892.104026, 892.104026, 0.000000, X, Y) && !ellipse(35139.131622, 17375.267822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34119.454346, 17031.304794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30515.674225, 25385.318634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30797.782000, 25458.551020, 1337.280038, 1337.280038, 0.000000, X, Y) && !ellipse(29191.377472, 25050.893799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31848.374146, 24825.184448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28548.888000, 24695.498000, 1270.920037, 1270.920037, 0.000000, X, Y) && !ellipse(32727.956146, 24232.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29224.366211, 24410.067963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.328000, 20375.993400, 955.496027, 955.496027, 0.000000, X, Y) && !ellipse(34374.800000, 19920.028000, 1689.976049, 1689.976049, 0.000000, X, Y) && !ellipse(33711.121460, 19019.919083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32606.005341, 18536.482056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34113.946000, 18349.418000, 891.968026, 891.968026, 0.000000, X, Y)
[Fri Jun 22 16:16:38 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src98.gif
[Fri Jun 22 17:11:17 2012] Mean detx,y = (-8288.05, 7523.75) 
[Fri Jun 22 17:11:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 17:12:24 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 17:12:25 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Fri Jun 22 17:12:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Fri Jun 22 18:19:39 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:39 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Fri Jun 22 18:19:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:42 2012] Using photon index=1.80, rate=0.343, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src98.arf
[Fri Jun 22 18:19:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:42 2012] Updating source flux to 1.6e-12
[Fri Jun 22 18:19:54 2012] Flag c found in src. 98 procflags, skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src98_pl.csv not found, spectral fit skipped or did not complete