[Thu Jun 21 22:41:37 2012] Detection parameters:
  Position = (286.9, 241.1) = 16 9 45.71 54 28 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.0 +/- 28.1
  Background counts = 214.2
  Rate = 0.05 +/- 0.007

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 4.24'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Thu Jun 21 22:48:17 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 94 for pass 0, mean size = 8.55"
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src94.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src94.csv
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src94_1.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src94.csv
[Fri Jun 22 06:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:53 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Fri Jun 22 06:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src94.csv
[Fri Jun 22 06:51:53 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Fri Jun 22 06:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src94.csv
[Fri Jun 22 06:51:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:01:08 2012] Warning, spatial fit 94 centroid is now closest to src. 97
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 92
[Fri Jun 22 07:01:24 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Fri Jun 22 07:01:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 90 for pass 1, mean size = 8.55"
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src90.ximg exists
[Fri Jun 22 16:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src90.csv
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src90_1.ximg exists
[Fri Jun 22 16:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src90.csv
[Fri Jun 22 16:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:05:28 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src90.ximg exists
[Fri Jun 22 16:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src90.csv
[Fri Jun 22 16:05:28 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src90_1.ximg exists
[Fri Jun 22 16:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src90.csv
[Fri Jun 22 16:05:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:16:12 2012] Warning, spatial fit 90 centroid is now closest to src. 92
[Fri Jun 22 16:16:12 2012] Source 94 is offset by -0.407218 and 5.416050 pixels which is larger than
2 X fitted extent = 3.930800 x 3.930800, not incorporating fit results
[Fri Jun 22 16:16:12 2012] Spatial fit model total counts = 603.237000, observed total counts = 559.000000
[Fri Jun 22 16:16:12 2012] Offset between fit and detection position for source 94 = 4.927370 pixels
[Fri Jun 22 16:16:12 2012] Warning, changing simple spatial fit ID from 90 to 98
[Fri Jun 22 16:16:12 2012] 600.917500 total counts/ 543.330000 bgd. counts: snr = 2.470566
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 4.927370 pixels
  Position = (287.6, 236.2) = 16 9 45.38 54 28 18.6
  Extent = 11.3 (4.3-17.8)" x 11.0 (4.7-17.8)", rotation angle = 234 (90-90) degrees
  Source counts = 57.6 +/- 24.5
  Background counts = 543.3
  Rate = 0.1 +/- 0.05
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.24
[Fri Jun 22 16:16:37 2012] XMMSAS src. selection expression = ellipse(24969.704000, 20501.366000, 676.662019, 662.718019, 233.898000, X, Y)
[Fri Jun 22 16:16:37 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src94_src.reg
[Fri Jun 22 16:16:37 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (249, 197) - (326, 275)
[Fri Jun 22 16:16:38 2012] XMMSAS bgd. selection expression = annulus(24969.704000, 20501.366000, 1127.770032, 2255.540065, X, Y) && !ellipse(27052.098236, 23010.031189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24309.545898, 23444.030243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.706207, 22458.993134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26072.695099, 23565.513763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.848755, 23536.398712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.607483, 23443.369141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27600.048492, 22985.095154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.499207, 22858.779480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.188995, 22692.080811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25387.856842, 22594.492554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.371582, 22054.778198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26516.987701, 21791.871887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24842.938629, 21362.693039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25655.226257, 21010.150284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.285889, 20738.093414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25933.656525, 20312.805511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24881.391418, 19963.181961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.933929, 19538.308243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.313049, 18689.455551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25322.022736, 18316.137192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26288.256927, 18048.463776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.000000, 17959.152573, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 16:16:38 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src94.gif
[Fri Jun 22 17:09:48 2012] Mean detx,y = (-6124.03, -550.98) 
[Fri Jun 22 17:09:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 17:10:13 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 17:10:13 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Fri Jun 22 17:10:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src94_bgd.pi.gz
[Fri Jun 22 17:57:18 2012] Not generating rmf since there are only 57 counts
[Fri Jun 22 17:57:18 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:19:38 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:38 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Fri Jun 22 18:19:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:42 2012] Using photon index=1.80, rate=0.114, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src94.arf
[Fri Jun 22 18:19:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:42 2012] Updating source flux to 3.5e-13
[Fri Jun 22 18:19:54 2012] Flag b found in src. 94 procflags, skipping spectral fitting
[Fri Jun 22 18:19:54 2012] Flag c found in src. 94 procflags, skipping spectral fitting
[Fri Jun 22 18:19:54 2012] Source 94 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src94_pl.csv not found, spectral fit skipped or did not complete