[Thu Jun 21 22:41:36 2012] Detection parameters:
  Position = (294.0, 271.1) = 16 9 42.16 54 30 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.8 +/- 27.3
  Background counts = 200.0
  Rate = 0.04 +/- 0.006

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 2.01'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Thu Jun 21 22:48:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.820
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 7.43"
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src83.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src83.csv
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src83_1.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src83.csv
[Fri Jun 22 06:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:53 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Fri Jun 22 06:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src83.csv
[Fri Jun 22 06:51:53 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Fri Jun 22 06:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src83.csv
[Fri Jun 22 06:51:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:01:08 2012] Warning, spatial fit 83 centroid is now closest to src. 79
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 82
[Fri Jun 22 07:01:08 2012] Source is confused with source 84
[Fri Jun 22 07:01:24 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Fri Jun 22 07:01:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.820
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 7.43"
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src80.ximg exists
[Fri Jun 22 16:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src80.csv
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src80_1.ximg exists
[Fri Jun 22 16:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src80.csv
[Fri Jun 22 16:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:05:28 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Fri Jun 22 16:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src80.csv
[Fri Jun 22 16:05:28 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Fri Jun 22 16:05:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src80.csv
[Fri Jun 22 16:05:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:16:11 2012] Spatial fit model total counts = 524.765000, observed total counts = 455.000000
[Fri Jun 22 16:16:11 2012] Poor agreement between spatial fit and data for source 83
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 22 16:16:11 2012] Source 83 is offset by -1.267945 and 3.807342 pixels which is larger than
2 X fitted extent = 0.910432 x 0.910432, not incorporating fit results
[Fri Jun 22 16:16:11 2012] Warning, spatial fit 80 centroid is now closest to src. 84
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:37 2012] XMMSAS src. selection expression = ellipse(25530.848755, 23536.398712, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 16:16:37 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src83_src.reg
[Fri Jun 22 16:16:37 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (257, 234) - (332, 309)
[Fri Jun 22 16:16:37 2012] XMMSAS bgd. selection expression = annulus(25530.848755, 23536.398712, 1087.500000, 2175.000000, X, Y) && !ellipse(27052.098236, 23010.031189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25497.952942, 24196.553162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24931.375000, 23971.839447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24309.545898, 23444.030243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.706207, 22458.993134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27968.563904, 24777.855896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27277.808000, 24399.070600, 1202.432035, 1202.432035, 0.000000, X, Y) && !ellipse(28548.888000, 24695.498000, 1270.920037, 1270.920037, 0.000000, X, Y) && !ellipse(26678.692261, 24394.668793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27909.046112, 24234.153687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25984.797699, 24289.476532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26502.878876, 23877.073486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27299.116852, 23788.889343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26072.695099, 23565.513763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.607483, 23443.369141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27600.048492, 22985.095154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.499207, 22858.779480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.188995, 22692.080811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25387.856842, 22594.492554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.371582, 22054.778198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26516.987701, 21791.871887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24842.938629, 21362.693039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25655.226257, 21010.150284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24969.704000, 20501.366000, 902.216026, 883.624025, 233.898000, X, Y) && !ellipse(26139.285889, 20738.093414, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 16:16:37 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src83.gif
[Fri Jun 22 17:04:38 2012] Mean detx,y = (-3235.24, 559.64) 
[Fri Jun 22 17:04:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 17:04:58 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 17:04:59 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Fri Jun 22 17:04:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Fri Jun 22 17:55:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 17:55:47 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:19:38 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:38 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Fri Jun 22 18:19:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:42 2012] Using photon index=1.80, rate=0.0398, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src83.arf
[Fri Jun 22 18:19:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:42 2012] Updating source flux to 1.2e-13
[Fri Jun 22 18:19:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src83_pl.csv not found, spectral fit skipped or did not complete